Dell Latitude 5300 2-in-1 Onderhoudshandleiding Regelgevingsmodel: P96G Regelgevingstype: P96G001
Opmerkingen, voorzorgsmaatregelen,en waarschuwingen OPMERKING: Een OPMERKING duidt belangrijke informatie aan voor een beter gebruik van het product. WAARSCHUWING: WAARSCHUWINGEN duiden potentiële schade aan hardware of potentieel gegevensverlies aan en vertellen u hoe het probleem kan worden vermeden. GEVAAR: LET OP duidt het risico van schade aan eigendommen, lichamelijk letsel of overlijden aan. © 2019 Dell Inc. of zijn dochtermaatschappijen. Alle rechten voorbehouden.
Inhoudsopgave 1 Aan de computer werken............................................................................................................... 5 Veiligheidsinstructies............................................................................................................................................................. 5 Voordat u in de computer gaat werken........................................................................................................................
De luidsprekers verwijderen......................................................................................................................................... 40 De luidsprekers plaatsen............................................................................................................................................... 43 Systeemventilator............................................................................................................................................................
1 Aan de computer werken Veiligheidsinstructies Vereisten Volg de onderstaande veiligheidsrichtlijnen om uw persoonlijke veiligheid te garanderen en de computer te beschermen tegen mogelijke schade. Tenzij anders aangegeven, wordt er bij elke procedure in dit document van de volgende veronderstellingen uitgegaan: • • U hebt de veiligheidsinformatie geraadpleegd die bij uw computer is geleverd.
Stappen 1. Zorg dat u de Veiligheidsinstructies volgt. 2. Zorg ervoor dat het werkoppervlak vlak en schoon is, om te voorkomen dat de computerkap bekrast raakt. 3. Zet de computer uit. 4. Verwijder alle stekkers van netwerkkabels uit de computer. WAARSCHUWING: Wanneer u een netwerkkabel wilt verwijderen, moet u eerst de connector van de netwerkkabel uit de computer verwijderen en daarna de netwerkkabel loskoppelen van het netwerkapparaat. 5.
• • Fataal: Fatale storingen vertegenwoordigen ongeveer 20 procent van de aan ESD gerelateerde storingen. De schade veroorzaakt een onmiddellijk en volledig verlies van functionaliteit van het apparaat. Een voorbeeld van een fatale fout is een geheugen-DIMM die een statische schok heeft ontvangen en onmiddellijk een 'No POST/No Video’-symptoom genereert, waarbij een pieptoon wordt uitgezonden voor ontbrekend of niet-functioneel geheugen.
• schuimverpakkingsmateriaal moet worden gebruikt met de originele doos van het nieuwe onderdeel. ESD-gevoelige apparaten dienen alleen op ESD-beschermde ondergrond te worden geplaatst en onderdelen mogen nooit op de ESD-tas worden geplaatst omdat alleen de binnenkant daarvan is beschermd. Plaats onderdelen altijd in uw hand, op de ESD-mat, in het systeem of in een antistatische zak.
2 Technologie en onderdelen In dit hoofdstuk worden de technologie en onderdelen beschreven die beschikbaar zijn in het systeem. Onderwerpen: • • • • USB-functies USB Type-C HDMI 1.4a Gedrag van het LED-lampje van de aan-/uitknop USB-functies Universal Serial Bus of USB, werd in 1996 op de markt gebracht. USB heeft de verbinding tussen hostcomputers en randapparaten, zoals muizen, toetsenborden, externe schijven en printers, enorm vereenvoudigd. Tabel 1.
• • USB 2.0 bevatte vier draden (voeding, aarde en een paar voor differentiële gegevens); USB 3.0/USB 3.1 Gen 1 voegt nog vier draden toe voor twee paar differentiële signalen (ontvangen en verzenden) voor een totaal van acht aansluitingen in de connectoren en bekabeling. USB 3.0/USB 3.1 Gen 1 maakt gebruik van de bi-directionele data-interface in plaats van de half-duplex opstelling van USB 2.0. Hierdoor is de theoretische bandbreedte 10 keer hoger.
USB Type-C USB Type-C is een nieuwe, kleine, fysieke connector. De connector zelf ondersteunt diverse interessante nieuwe USB-standaarden, zoals USB 3.1 en USB Power Delivery (USB PD). Alternatieve modus USB Type-C is een nieuwe, zeer kleine verbindingsstandaard. De grootte bedraagt ongeveer een derde van de oude USB Type-A-stekker. Dit is een standaard met enkele connector die elk apparaat moet kunnen gebruiken.
Thunderbolt 3 via USB Type C Thunderbolt 3 brengt Thunderbolt naar USB-type C met snelheden tot 40 Gbps, waardoor er één compacte poort ontstaat die alles kan: het levert de snelste, meest veelzijdige verbinding naar elke dock, elk beeldscherm of elk gegevensapparaat, zoals een externe harde schijf. Thunderbolt 3 maakt gebruik van een USB Type-C-connector/-poort om verbinding te maken met ondersteunde randapparatuur. 1. 2. 3. 4.
• • HDMI Micro-connector - een nieuwe, kleinere connector voor telefoons en andere draagbare apparaten, ondersteunt videoresoluties tot 1080p. Automotive Connection System - nieuwe kabels en connectoren voor videosystemen in de auto-industrie, ontworpen om te voldoen aan de unieke vereisten van de auto-industrie en tegelijk echte HD-kwaliteit leveren.
De aan-/uitknop met vingerafdruklezer zal geen LED hebben en zal gebruikmaken van de beschikbare LED's in het systeem om een indicatie van de systeemstatus te geven. • LED van de voedingsadapter: • • Het LED-lampje op de connector van de voedingsadapter brandt wit wanneer de voeding is ingeschakeld vanuit het stopcontact. LED van de batterij-indicator: • Als de computer is aangesloten op een stopcontact, werkt het batterijlampje als volgt: • 1. Aanhoudend wit - de batterij wordt opgeladen.
3 Belangrijke onderdelen van uw systeem 1. Onderplaat 2.
3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Koelplaat Geheugenmodules Systeemkaart Solid State-schijf (SSD) Batterij Luidspreker Smartcardlezerkaart Palmsteun Beeldschermeenheid LED-kaart Touchpadknoppenkaart Knoopcelbatterij WLAN-kaart WWAN-kaart Systeemventilator OPMERKING: Dell geeft een lijst met componenten en hun onderdeelnummers voor de originele, gekochte systeemconfiguratie. Deze onderdelen zijn beschikbaar volgens garantiedekkingen die door de klant zijn aangeschaft.
4 Demonteren en hermonteren microSD-kaart De microSD-kaart verwijderen Vereisten 1. Volg de procedure in Voordat u in de computer gaat werken. Stappen 1. Druk op de microSD-kaart om deze uit de computer te verwijderen [1]. 2. Schuif de microSD-kaart uit de computer [2]. De MicroSD-kaart plaatsen Stappen 1. Lijn de microSD-kaart uit met de bijbehorende sleuf in de computer [1]. 2. Schuif de microSD-kaart in de sleuf totdat de kaart op zijn plaats klikt [2].
3. Volg de procedures in Nadat u in de computer hebt gewerkt. SIM-kaarthouder De simkaartlade verwijderen Vereisten 1. Volg de procedure in Voordat u in de computer gaat werken. Stappen 1. Steek een pinnetje in het gat van de SIM-kaartlade en duw naar binnen totdat de lade wordt losgemaakt [1, 2]. 2. Schuif de SIM-kaartlade uit de computer [3].
De simkaartlade plaatsen Stappen 1. Plaats de SIM-kaart in de SIM-kaartlade met het metalen contactpunt naar boven gericht [1]. 2. Lijn de SIM-kaartlade uit met de sleuf in de computer en schuif deze voorzichtig naar binnen [2]. 3. Schuif de SIM-kaartlade in de sleuf totdat deze op zijn plaats klikt [3].
4. Volg de procedures in Nadat u in de computer hebt gewerkt. Onderplaat De onderplaat verwijderen Vereisten 1. Volg de procedure in Voordat u in de computer gaat werken 2. De microSD-kaart verwijderen. Stappen 1. Draai de acht borgschroeven los [1].
2. Wrik met een plastic pennetje [1] de onderplaat van de linkerbovenhoek los en blijf werken aan de zijkanten om de onderplaat te openen [2].
3. Til de onderplaat op en verwijder deze uit de computer.
De onderplaat plaatsen Stappen 1. Lijn de onderplaat uit en plaats deze op de computer.
2. Druk op de randen en zijden van de onderplaat totdat deze vastklikt.
3. Draai de acht borgschroeven vast om de onderplaat aan de computer te bevestigen.
Vervolgstappen 1. Plaats de microSD-kaart terug. 2. Volg de procedure in Nadat u in de computer hebt gewerkt. Batterij Voorzorgsmaatregelen voor de lithium-ionbatterij WAARSCHUWING: • Wees voorzichtig bij het hanteren van lithium-ionbatterijen. • Ontlaad de batterij zo veel mogelijk voordat u deze uit het systeem verwijdert. Dit kan gedaan worden door de netadapter los te koppelen van het systeem, zodat de batterij kan leeglopen.
3. Draai de twee borgschroeven los waarmee de batterij aan de palmsteun vastzit [1]. 4. Schuif de batterij naar binnen en til de batterij weg van de palmsteun [2].
De batterij plaatsen Stappen 1. Lijn de batterij uit en schuif deze op de palmsteun [1]. 2. Draai de twee borgschroeven vast om de batterij aan de palmsteun te bevestigen [2].
3. Sluit de luidsprekerkabel aan op de connector op het moederbord [1]. 4. Bevestig de tape om de connector van de batterijkabel te bevestigen [2].
Vervolgstappen 1. Plaats de onderplaat terug. 2. Plaats de microSD-kaart terug. 3. Volg de procedure in Nadat u in de computer hebt gewerkt WWAN-kaart De WWAN-kaart verwijderen Vereisten 1. 2. 3. 4. Volg de procedure in Voordat u in de computer gaat werken. De microSD-kaart verwijderen. Verwijder de onderplaat. Verwijder de batterij. Stappen 1. Verwijder de enkele schroef (M2x3) waarmee de WWAN-kaartbeugel aan het moederbord is bevestigd [1]. 2.
De WWAN-kaart plaatsen Over deze taak WAARSCHUWING: Plaats geen kabels onder de WWAN-kaart om beschadiging te voorkomen. Stappen 1. Steek de WWAN-kaart in de connector op het moederbord [1]. 2. Sluit de WWAN-antennekabels aan op de connectoren op de WWAN-kaart [2]. 3. Plaats de WWAN-kaartbeugel om de WWAN-antennekabels aan de WWAN-kaart te bevestigen [3]. 4. Plaats de enkele schroef (M2x3) terug waarmee de WWAN-kaartbeugel aan de WWAN-kaart wordt bevestigd [4].
Vervolgstappen 1. 2. 3. 4. Plaats de batterij terug. Plaats de onderplaat terug. Plaats de microSD-kaart terug. Volg de procedure in Nadat u in de computer hebt gewerkt. WLAN-kaart De WLAN-kaart verwijderen Vereisten 1. 2. 3. 4. Volg de procedure in Voordat u in de computer gaat werken. De microSD-kaart verwijderen. Verwijder de onderplaat. Verwijder de batterij. Stappen 1. Verwijder de enkele schroef (M2x2) waarmee de WLAN-kaartbeugel aan het moederbord is bevestigd [1]. 2.
De WLAN-kaart plaatsen Over deze taak WAARSCHUWING: Plaats geen kabels onder de WLAN-kaart om beschadigingen te voorkomen. Stappen 1. Steek de WLAN-kaart in de connector op het moederbord [1]. 2. Sluit de WLAN-antennekabels aan op de connectoren op de WLAN-kaart [2]. 3. Plaats de WLAN-kaartbeugel om de WLAN-antennekabels aan de WLAN-kaart [3] te bevestigen. 4. Plaats de enkele schroef (M2x3) terug waarmee de WLAN-kaartbeugel aan de WLAN-kaart wordt bevestigd [4].
Vervolgstappen 1. 2. 3. 4. Plaats de batterij terug. Plaats de onderplaat terug. Plaats de microSD-kaart terug. Volg de procedure in Nadat u in de computer hebt gewerkt. Geheugenmodules De geheugenmodule verwijderen Vereisten 1. 2. 3. 4. Volg de procedure in Voordat u in de computer gaat werken. De microSD-kaart verwijderen. Verwijder de onderplaat. Verwijder de batterij. Stappen 1. Wrik de bevestigingsklemmen los waarmee de geheugenmodule is bevestigd totdat de geheugenmodule omhoogklikt [1]. 2.
De geheugenmodule plaatsen Stappen 1. Lijn de inkeping in de geheugenmodule uit met het lipje op de sleuf van de geheugenmodule. 2. Schuif de geheugenmodule goed in de sleuf onder een hoek [1]. 3. Druk de geheugenmodule omlaag totdat de klemmen vastklikken [2]. OPMERKING: Als u geen klik hoort, verwijdert u de geheugenmodule en plaatst u deze nogmaals.
Vervolgstappen 1. 2. 3. 4. Plaats de batterij terug. Plaats de onderplaat terug. Plaats de microSD-kaart terug. Volg de procedure in Nadat u in de computer hebt gewerkt. Solid-state schijf De M.2 SSD verwijderen Vereisten 1. 2. 3. 4. Volg de procedure in Voordat u in de computer gaat werken. De microSD-kaart verwijderen. Verwijder de onderplaat. Verwijder de batterij. Stappen 1. Verwijder de twee schroeven (M2x3) waarmee de M.2 SSD-steunbeugel aan de palmsteun wordt bevestigd [1]. 2.
3. Verwijder de enkele schroef (M2x2) waarmee de M.2 SSD op de palmsteun vastzit [1]. 4. Til de M.2 SSD weg van de computer [2].
De M.2 SSD plaatsen Stappen 1. Plaats de M.2 SSD in de sleuf op de palmsteun [1]. 2. Plaats de enkele schroef (M2x2) terug om de M.2 SSD aan de palmsteun te bevestigen [2].
3. Lijn de SSD-steunbeugel uit en plaats deze boven de M.2 SSD [1]. 4. Plaats de twee schroeven (M2x3) terug waarmee de SSD-steunbeugel wordt bevestigd aan de palmsteun [2].
Vervolgstappen 1. 2. 3. 4. Plaats de batterij terug. Plaats de onderplaat terug. Plaats de microSD-kaart terug. Volg de procedure in Nadat u in de computer hebt gewerkt. Luidsprekers De luidsprekers verwijderen Vereisten 1. 2. 3. 4. Volg de procedure in Voordat u in de computer gaat werken. De microSD-kaart verwijderen. Verwijder de onderplaat. Verwijder de batterij. Stappen 1. Koppel de luidsprekerkabel los van de connector op het moederbord [1]. 2.
3. Koppel de touchpadkabel los van de connector op het dochterbord. 4. Verwijder de tape en haal de luidsprekerkabel los.
. 5. Til de luidsprekers omhoog en verwijder deze van de palmsteun. .
De luidsprekers plaatsen Stappen 1. Gebruik de uitlijnpunten en rubberen dichtingsringen om de luidsprekers in de sleuven op de palmsteun te plaatsen. 2. Leid de luidsprekerkabel door de geleiders.
3. Bevestig de tape om de luidsprekerkabel aan de palmsteun te bevestigen [1]. 4. Sluit de luidsprekerkabel aan op de connector op het moederbord [2].
Vervolgstappen 1. 2. 3. 4. Plaats de batterij terug. Plaats de onderplaat terug. Plaats de microSD-kaart terug. Volg de procedure in Nadat u in de computer hebt gewerkt. Systeemventilator De systeemventilator verwijderen Vereisten 1. 2. 3. 4. Volg de procedure in Voordat u in de computer gaat werken. De microSD-kaart verwijderen. Verwijder de onderplaat. Verwijder de batterij. Stappen 1. Maak de kabel van de systeemventilator los van de connector op het moederbord.
2. Verwijder de twee schroeven (M2x5) waarmee de systeemventilator aan de palmsteun is bevestigd [1]. 3. Til de systeemventilator weg van de computer [2].
De systeemventilator plaatsen Stappen 1. Plaats de schroefgaten op de systeemventilator en lijn deze uit met de schroefgaten op de palmsteun [1]. 2. Plaats de twee schroeven (M2x5) terug om de systeemventilator aan de palmsteun te bevestigen [2].
3. Sluit de kabel van de systeemventilator aan op de connector op het moederbord.
Vervolgstappen 1. 2. 3. 4. Plaats de batterij terug. Plaats de onderplaat terug. Plaats de microSD-kaart terug. Volg de procedure in Nadat u in de computer hebt gewerkt. Warmteafleider De warmteafleider verwijderen - UMA Vereisten 1. 2. 3. 4. Volg de procedure in Voordat u in de computer gaat werken. De microSD-kaart verwijderen. Verwijder de onderplaat. Verwijder de batterij. Stappen 1. Maak de vier borgschroeven los waarmee de warmteafleider aan het moederbord is bevestigd [1].
De warmteafleider plaatsen - UMA Stappen 1. Plaats de warmteafleider op het moederbord en lijn de schroefgaten op de warmteafleider uit met de schroefgaten op het moederbord [1]. 2. Draai de vier geborgde borgschroeven waarmee de warmteafleider aan het moederbord is bevestigd in de juiste volgorde (zoals aangegeven op de warmteafleider) vast [2]. Vervolgstappen 1. 2. 3. 4. Plaats de batterij terug. Plaats de onderplaat terug. Plaats de microSD-kaart terug.
Stappen 1. Verwijder de twee schroeven (M2x4) waarmee de Type-C-beugel wordt bevestigd aan de systeemkaart [1]. 2. Verwijder de Type-C-beugel uit de computer [2]. 3. Koppel de kabel van de gelijkspanningsingangspoort los van de connector op het moederbord en verwijder de gelijkspanningsingangspoort uit de computer [1, 2].
De gelijkspanningsingangspoort plaatsen Stappen 1. Plaats de gelijkspanningsingangspoort in de daarvoor bestemde sleuf in de computer [1]. 2. Sluit de kabel van de gelijkspanningsingangspoort aan op de connector op het moederbord [2].
3. Plaats de Type-C-beugel in de daarvoor bestemde sleuf op de computer [1]. 4. Plaats de twee schroeven (M2x4) terug waarmee de Type-C-beugel aan de palmsteun wordt bevestigd [2].
Vervolgstappen 1. 2. 3. 4. Plaats de batterij terug. Plaats de onderplaat terug. Plaats de microSD-kaart terug. Volg de procedure in Nadat u in de computer hebt gewerkt. LED-kaart De led-kaart verwijderen Vereisten 1. 2. 3. 4. Volg de procedure in Voordat u in de computer gaat werken. De microSD-kaart verwijderen. Verwijder de onderplaat. Verwijder de batterij. Stappen 1. Koppel de kabel van de LED-kaart los van de connector op het moederbord [1]. 2. Verwijder de LED-kaartkabel [2].
3. Trek de tape los waarmee de connector van de LED-kaartkabel aan de LED-kaart vastzit [1]. 4. Verwijder de grijze tape waarmee de LED-kaart vastzit [2].
5. Verwijder de enkele schroef (M2x2.5) waarmee de LED-kaart aan de palmsteun vastzit [1]. 6. Til de LED-kaart uit de computer [2].
De led-kaart plaatsen Stappen 1. Plaats de LED-kaart en lijn het schroefgat op de LED-kaart uit met het schroefgat op de palmsteun [1]. 2. Plaats de enkele schroef (M2x2.5) terug om de LED-kaart te bevestigen aan de palmsteun [2].
3. Plak de grijze tape vast om de LED-kaart te bevestigen [1]. 4. Plak de tape vast om de LED-kaart te bevestigen [2].
5. Sluit de kabel van de LED-kaart aan op de connector op het moederbord en leid de kabel van de LED-kaart [1, 2].
Vervolgstappen 1. 2. 3. 4. Plaats de batterij terug. Plaats de onderplaat terug. Plaats de microSD-kaart terug. Volg de procedure in Nadat u in de computer hebt gewerkt. Touchpadknoppenkaart De touchpadknoppenkaart verwijderen Vereisten 1. 2. 3. 4. 5. 6. Volg de procedure in Voordat u in de computer gaat werken. De microSD-kaart verwijderen. Verwijder de onderplaat. Verwijder de batterij. Verwijder de luidspreker. Verwijder de LED-kaart.
De touchpadknoppenkaart plaatsen Stappen 1. Plaats de touchpadknoppenkaart in de sleuf op de palmsteun [1]. 2. Plaats de twee schroeven (M2x3) terug waarmee de touchpadknoppenkaart aan de palmsteun is bevestigd [2].
3. Sluit de kabel van de touchpadknoppenkaart aan op de connector op de touchpadkaart.
Vervolgstappen 1. 2. 3. 4. 5. 6. Plaats de LED-kaart terug. Plaats de luidsprekerterug. Plaats de batterij terug. Plaats de onderplaat terug. Plaats de microSD-kaart terug. Volg de procedure in Nadat u in de computer hebt gewerkt. Moederbord Het moederbord verwijderen Vereisten 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Volg de procedure in Voordat u in de computer gaat werken. De microSD-kaart verwijderen. Verwijder de onderplaat. Verwijder de batterij. Verwijder de luidspreker. Verwijder de warmteafleider.
3. Koppel de volgende kabels los: a) USH-kabel [1]. b) LED-kaartkabel [2]. c) Touchpadkabel [3].
4. Verwijder de enkele schroef (M2.5x4) waarmee de vingerafdruksteunbeugel aan het moederbord is bevestigd [1]. 5. Til de vingerafdruksteunbeugel weg van de computer [2]. 6. Koppel de vingerafdrukpoort los [3].
7. Trek de tape weg en koppel de kabel los van de connector op het moederbord [1]. 8. Verwijder de tape waarmee de eDP-beugel is bevestigd [2]. 9. Verwijder de schroef (M2x4) waarmee de eDP-beugel aan de systeemkaart is bevestigd [3]. 10. Verwijder de eDP-beugel uit de computer [4]. 11. Open de vergrendeling en koppel de eDP-kabel los van de connector op de systeemkaart [5].
12. Koppel de kabel van de sensorkaart los van de connector op de systeemkaart [1]. 13. Verwijder de knoopcelbatterij uit de palmsteun [2].
14. Verwijder de schroef (M2.5x4) waarmee de systeemkaart aan de palmsteun is bevestigd [1]. 15. Til de systeemkaart uit de computer [2].
Het moederbord plaatsen Stappen 1. Lijn het moederbord uit en plaats deze op de palmsteun [1]. 2. Plaats de schroef (M2.5x4) terug waarmee het moederbord aan de palmsteun wordt bevestigd [2].
3. Sluit de sensorkabel aan op de connector op de systeemkaart [1]. 4. Plaats de knoopcelbatterij in de sleuf op de palmsteun [2].
5. Sluit de kabel aan op de connector op het moederbord en bevestig de tape [1]. 6. Sluit de eDP-kabel aan op de connector op het moederbord [2]. 7. Plaats de eDP-steunbeugel boven de eDP-connector [3]. 8. Plaats de enkele schroef (M2x4) terug om de eDP-beugel te bevestigen aan het moederbord [4]. 9. Breng de tape aan om de eDP-steunbeugel [5] vast te zetten.
10. Sluit de vingerafdrukkabel aan op de connector op het moederbord [1]. 11. Plaats de vingerafdruksteunbeugel [2]. 12. Plaats de enkele schroef (M2.5x4) terug om de vingerafdruksteunbeugel te bevestigen aan het moederbord [3].
13. Sluit de volgende kabels aan: a) USH-kabel [1]. b) LED-kaartkabel [2]. c) Touchpadkabel [3].
14. Lijn de het geheugenmoduleframe uit in de sleuf op de systeemkaart [1] een plaats dit in de sleuf. 15. Plaats de drie de schroeven (M2x3) waarmee het geheugenmoduleframe aan de systeemkaart is bevestigd [2].
Vervolgstappen 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Plaats de WWAN-kaart terug. Plaats de WLAN-kaart terug. Plaats de gelijkspanningsingang terug. Plaats de geheugenmodule terug. Plaats de systeemventilator terug. Plaats de warmteafleider terug. Plaats de luidsprekerterug. Plaats de batterij terug. Plaats de onderplaat terug. Plaats de microSD-kaart terug. Volg de procedure in Nadat u in de computer hebt gewerkt.
Knoopbatterij De knoopbatterij verwijderen Vereisten 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Volg de procedure in Voordat u in de computer gaat werken. De microSD-kaart verwijderen. Verwijder de onderplaat. Verwijder de batterij. Verwijder de luidspreker. Verwijder de warmteafleider. Verwijder de geheugenmodule. Verwijder de systeemventilator. Verwijder de gelijkspanningsingang. Verwijder de WLAN-kaart. Verwijder de WWAN-kaart. Verwijder het moederbord.
Vervolgstappen 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Plaats het moederbord terug. Plaats de WWAN-kaart terug. Plaats de WLAN-kaart terug. Plaats de gelijkspanningsingang terug. Plaats de geheugenmodule terug. Plaats de systeemventilator terug. Plaats de warmteafleider terug. Plaats de luidsprekerterug. Plaats de batterij terug. Plaats de onderplaat terug. Plaats de microSD-kaart terug. Volg de procedure in Nadat u in de computer hebt gewerkt.
Stappen 1. Trek de tape weg en koppel de kabel los van de connector op het moederbord [1]. 2. Verwijder de enkele schroef (M2x4) waarmee de eDP-kabelbeugel aan het moederbord is bevestigd [2]. 3. Til de eDP-kabelbeugel weg van het moederbord [3]. 4. Koppel de eDP-kabel los en verwijder deze [4]. 5. Open de beeldschermeenheid onder een hoek van 180 graden, draai het systeem om en plaats het systeem op een plat oppervlak.
6. Verwijder de vier schroeven (M2.5x4) waarmee de beeldschermeenheid aan het systeemchassis is bevestigd [1]. 7. Verwijder de beeldschermeenheid uit het systeem [2].
De beeldschermeenheid plaatsen Over deze taak OPMERKING: Zorg dat de scharnieren maximaal zijn geopend voordat het beeldscherm terug wordt geplaatst op de polssteun- en toetsenbordassemblage. Stappen 1. Lijn het systeemchassis uit en plaats dit onder de scharnieren op de beeldschermeenheid [1]. 2. Plaats de vier schroeven (M2.5x4) terug waarmee de beeldschermeenheid aan het systeemchassis is bevestigd [2].
3. Plaats het systeemchassis op de beeldschermeenheid.
4. Sluit de kabel aan op de connector op het moederbord en bevestig de tape [1]. 5. Leid de eDP-kabel opnieuw en sluit deze aan op de eDP-connector [2]. 6. Plaats de eDP-kabelbeugel op het moederbord [3]. 7. Plaats de enkele schroef (M2x4) terug waarmee de beugel van de eDP-kabel aan het moederbord wordt bevestigd [4].
Vervolgstappen 1. 2. 3. 4. Plaats de batterij terug. Plaats de onderplaat terug. Plaats de microSD-kaart terug. Volg de procedure in Nadat u in de computer hebt gewerkt. Toetsenbord het toetsenbord verwijderen Vereisten 1. 2. 3. 4. 5. 6. 7. 8. 9. Volg de procedure in Voordat u in de computer gaat werken. De microSD-kaart verwijderen. Verwijder de onderplaat. Verwijder de batterij. Verwijder de luidspreker. Verwijder de geheugenmodule. Verwijder de systeemventilator. Verwijder de gelijkspanningsingang.
10. Verwijder de WWAN-kaart. 11. Verwijder het moederbord. OPMERKING: Het moederbord kan met de aangesloten warmteafleider worden verwijderd. 12. Verwijder de knoopcelbatterij. Stappen 1. Trek de tape los waarmee het toetsenbord en de SmartCard-lezer worden bevestigd. 2. Open de vergrendeling en koppel de kabel van de achtergrondverlichting en de toetsenbordkabel los van de connectoren op de touchpad.
3. Verwijder de 19 (M2x2) schroeven waarmee het toetsenbord aan de palmsteun is bevestigd [1]. 4. Verwijder het toetsenbord uit de computer [2].
Het toetsenbord plaatsen Stappen 1. Lijn het toetsenbord uit en plaats deze op de palmsteun [1]. 2. Plaats de 19 (M2x2) schroeven terug waarmee het toetsenbord aan de palmsteun is bevestigd [2].
3. Sluit de kabel van de achtergrondverlichting en de toetsenbordkabel aan op de connectoren op de touchpad.
4. Breng de tape aan waarmee het toetsenbord en de SmartCard-kaart worden bevestigd.
Vervolgstappen 1. Plaats de knoopcelbatterij terug. 2. Plaats het moederbord terug. OPMERKING: Het moederbord kan met de aangesloten warmteafleider worden teruggeplaatst. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Plaats de WWAN-kaart terug. Plaats de WLAN-kaart terug. Plaats de gelijkspanningsingang terug. Plaats de systeemventilator terug. Plaats de geheugenmodule terug. Plaats de luidsprekerterug. Plaats de batterij terug. Plaats de onderplaat terug. Plaats de microSD-kaart terug.
2. Verwijder de twee schroeven (M2x2.5) waarmee de SmartCard-lezer aan de palmsteun is bevestigd [1]. 3. Til de kaart van de SmartCard-lezer uit de computer [2].
De kaart van de SmartCard-lezer plaatsen Stappen 1. Lijn de kaart van de SmartCard-lezer uit en plaats deze op de palmsteun [1]. 2. Plaats de twee (M2x2.5) schroeven terug waarmee de kaart van de SmartCard-lezer aan de palmsteun wordt bevestigd [2].
3. Leid de kabel van de SmartCard-lezer opnieuw.
Vervolgstappen 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Plaats de knoopcelbatterij terug. Plaats het moederbord terug. Plaats de WWAN-kaart terug. Plaats de WLAN-kaart terug. Plaats de gelijkspanningsingang terug. Plaats de geheugenmodule terug. Plaats de systeemventilator terug. Plaats de luidsprekerterug. Plaats de batterij terug. Plaats de onderplaat terug. Plaats de microSD-kaart terug. Volg de procedure in Nadat u in de computer hebt gewerkt.
7. 8. 9. 10. 11. Verwijder de systeemventilator. Verwijder de gelijkspanningsingang. Verwijder de WLAN-kaart. Verwijder de WWAN-kaart. Verwijder het moederbord. OPMERKING: Het moederbord kan met de aangesloten warmteafleider worden verwijderd. 12. Verwijder de knoopcelbatterij. 13. Verwijder de kaart van de SmartCard-lezer. Over deze taak Na het uitvoeren van de voorgaande stappen, blijft alleen de polssteun- en toetsenbordeenheid over. Vervolgstappen 1. Plaats de kaart van de SmartCard-lezer terug. 2.
5 Problemen oplossen Diagnostische Enhanced Pre-Boot System Assessment (ePSA) Over deze taak De ePSA-diagnose (ook bekend als systeemdiagnose) voert een volledige controle van uw hardware. ePSA maakt deel uit van het BIOS en wordt door het BIOS intern gestart.
Het statuslampje van de voeding en de batterij knippert oranje en pieptooncodes geven aan dat er storingen zijn. Bijvoorbeeld, het statuslampje van de voeding en de batterij knippert twee keer oranje gevolgd door en pauze, en knippert vervolgens drie keer gevolgd door een pauze. Dit 2,3-patroon houdt aan totdat de computer is uitgeschakeld en geeft aan dat er geen geheugen of RAM werd gevonden.
6 Behulpzame informatie vinden Onderwerpen: • Contact opnemen met Dell Contact opnemen met Dell Vereisten OPMERKING: Als u geen actieve internetverbinding hebt, kunt u contactgegevens ook vinden op uw factuur, pakbon, rekening of productcatalogus van Dell. Over deze taak Dell biedt diverse online en telefonische ondersteunings- en servicemogelijkheden. De beschikbaarheid verschilt per land en product en sommige services zijn mogelijk niet beschikbaar in uw regio.