Owners Manual
Table Of Contents
- Latitude 5300 Service Manual
- Contents
- Working on your computer
- Technology and components
- Major components of your system
- Disassembly and reassembly
- MicroSD card
- SIM card tray
- Base cover
- Battery
- WWAN card
- WLAN card
- Memory modules
- Solid-state drive
- Speakers
- System fan
- Heat sink
- DC-in port
- LED board
- Touchpad button board
- System board
- Coin-cell battery
- Display assembly
- Keyboard
- Keyboard bracket
- Smart card reader board
- Display bezel
- Hinge caps
- Display hinges
- Display panel
- Camera
- Display (eDP) cable
- Display back cover assembly
- Palmrest assembly
- Troubleshooting
- Getting help
4. Remove the battery.
5. Remove the display assembly.
6. Remove the display bezel.
7. Remove the hinge caps.
8. Remove the display hinges.
Steps
1. Remove the two (M2x2) screws that secure the display panel to the display assembly [1] and lift to turn over the display
panel to access the display cable [2].
2. Peel the conductive tape [1] on the display cable connector.
3. Lift the latch and disconnect the display cable from the connector on the display panel [2, 3].
NOTE:
Do not pull and release the Stretch (SR) Tapes from the display panel. There is no need to separate the brackets
from the display panel.
108 Disassembly and reassembly