Operation Manual

Component M2.0x3.0 M2.5x3.5 M2.5x5.0 M2.0x2.5

M2x

3.0

(OD4

.5)

M2x5

Display panel 4

Hard drive 4

WWAN 1

Subscriber Identity Module(SIM) board

Installing the Subscriber Identication Module card

1 Insert a paperclip or a Subscriber Identication Module (SIM) card removal tool into the pinhole [1].

2 Pull the SIM card tray to remove it [2].

3 Place the SIM on the SIM card tray.

4 Push the SIM card tray into the slot until it clicks into place.

Removing the Subscriber Identication Module card

CAUTION

: Removing the Subscriber Identication Module (SIM) card when the computer is on may cause data loss or damage

the card. Ensure your computer is turned o or the network connections are disabled.

1 Insert a paperclip or a SIM card removal tool into the pinhole on the SIM card tray.

2 Pull the SIM card tray to remove it.

3 Remove the SIM card from the SIM card tray.

4 Push the SIM card tray into the slot until it clicks into place.

Removing and installing components