Operation Manual

4 To remove the SSD clip:

a Remove the M2x3 screw that secures the SSD frame to the laptop [1].

b Lift the SSD frame away from the laptop [2].

Installing the M.2 Solid State Drive - SSD

NOTE

: Before installing SSD card, ensure that the battery is fully charged or the power cable is plugged in.

1 Place the SSD clip on the laptop.

NOTE

: Ensure to place the SSD clip head in the placeholder in the system chassis.

2 Tighten the M2x3 screw that secures SSD clip to the laptop.

3 Insert the SSD into the socket on the laptop.

4 Place the SSD bracket and tighten the M2x3 screw (2) to secure the SSD to the laptop.

5 Install the:

a battery

b base cover

6 Follow the procedure in After working inside your computer.

Removing and installing components