Operation Manual

a Disconnect the coin cell battery cable from the connector on the system board [1].

b Pry the coin cell battery to release from the adhesive and lift it away from the system board [2].

Installing the coin cell battery

1 Place the coin cell battery on the system board.

2 Connect the coin cell battery cable to the connector on the system board.

NOTE

: Route the coin cell battery cable carefully to avoid damaging the cable.

3 Install the:

a chassis frame

b battery

c base cover

4 Follow the procedure in After working inside your computer.

Memory modules

Removing the memory module

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

Removing and installing components