Operation Manual

Installing the power connector port

1 Insert the power connector port into the slot on the laptop.

2 Place the metal bracket on the power connector port.

3 Tighten the M2.0x3.0 screw to secure the metal bracket to the power connector port on the laptop.

4 Connect the power connector port cable to the connector on the system board.

5 Install the:

a battery

b base cover

6 Follow the procedure in After working inside your computer.

Chassis frame

Removing the chassis frame

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a SIM card module

b base cover

c battery

d WLAN card

e WWAN card

Removing and installing components