Operation Manual

Installing the chassis frame

1 Place the chassis frame on the computer and tighten the screws (M2x5, M2.0x3.0).

NOTE

: When reinstalling the chassis frame ensure the keyboard cables are NOT under the frame, but run through the

opening in the frame.

2 Connect the speaker, keyboard cable, touchpad cable, pointstick cable and backlight cable(optional).

3 Route the WLAN and WWAN cable.

NOTE

: Ensure the coin cell battery cable is properly routed in between the chassis frame and the system board to avoid

damages to the cable.

4 Install the:

a SSD card

b WWAN card

c WLAN card

d battery

e base cover

f SIM card module

5 Follow the procedure in After working inside your system.

Touchpad

Removing the touchpad

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

Removing and installing components