Operation Manual

b battery

c WLAN card

d WWAN

e SSD card or hard drive

f chassis frame

3 To release the touchpad panel:

a Lift the latch and disconnect the SmartCard reader cable from the connector on the system board [1].

b Peel o the SmartCard reader cable from the adhesive [2].

4 To remove the touchpad panel:

a Lift the latch and disconnect the touchpad panel cable from the connector on the system board [1].

b Remove the M2x3 screws (2) that secure the touchpad panel to the laptop [2].

c Lift the touchpad panel away from the laptop [3].

Removing and installing components