Operation Manual

Installing the touchpad
1 Insert the bottom edge of the Button Board under the plastic holder tabs rst when placing the buttons board back into the chassis.
2 Tighten the M2x3 screws to secure the touchpad panel.
3 Connect the touchpad cable.
4 Connect the SmartCard reader cable to the laptop.
5 Install the:
a chassis frame
b SSD card or hard drive
c WLAN card
d battery
e base cover
6 Follow the procedure in After working inside your computer.
SmartCard module
Removing the SmartCard reader
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
34
Removing and installing components