Operation Manual

Installing the SmartCard reader
1 Place the SmartCard reader on the laptop.
2 Tighten the M2x3 screws to secure the SmartCard reader to the laptop.
3 Ax the SmartCard reader cable and connect the cable to the connector on the system board.
4 Install the:
a chassis frame
b SSD card
c WLAN card
d battery
e base cover
5 Follow the procedure in After working inside your computer.
LED board
Removing the LED board
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
36
Removing and installing components