Operation Manual

Installing camera

1 Insert the camera into the slot on the display back cover.

2 Connect the display cable to the connector.

3 Ax the two conductive tape above the camera.

4 Install the :

a display panel

b display bezel

c display assembly

d WLAN

e WWAN

f memory module

g battery

h base cover

5 Follow the procedure in After working inside your computer.

Display back cover assembly

Removing the display back cover assembly

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

c WWAN card

d WLAN card

e display assembly

f display bezel

g display panel

h eDP cable

i camera

3 The display back cover assembly is the remaining component, after removing all the components.

Removing and installing components