Operation Manual

Option Description
SATA Operation Allows you to congure the internal SATA hard-drive controller. The options are:
Disabled
AHCI
RAID On: This option is enabled by default.
Drives Allows you to congure the SATA drives on board. All drives are enabled by default. The options are:
SATA-0
SATA-2
SATA-4
M.2 PCI-e SSD-0
SMART Reporting This eld controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specication. This option is
disabled by default.
Enable SMART Reporting
USB Conguration
This is an optional feature.
This eld congures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices (HDD, memory key, oppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
Enable USB Boot Support (by default enable)
Enable External USB Port (by default enable)
Enable Thunderbolt Ports (by default enable)
Enable Thunderbolt Boot Support
Always Allow Dell Docks (by default enable)
Enable Thunderbolt (ans PCIe behind TBT) Pre-boot
Security level — No Secuirty
Security level — User Conguration(by default enable)
Security level — Secure connect
Security level — Display Port Only
NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings.
USB PowerShare This eld congures the USB PowerShare feature behavior. This option allows you to charge external devices using
the stored system battery power through the USB PowerShare port.
Audio This eld enables or disables the integrated audio controller. By default, the Enable Audio option is selected. The
options are:
Enable Microphone (by default enable)
Enable Internal Speaker (by default enable)
Keyboard
Illumination
This eld lets you choose the operating mode of the keyboard illumination feature. The keyboard brightness level
can be set from 0% to 100%. The options are:
System setup options 77