Owners Manual

Installing hard drive
1 Insert the hard drive into the slot on the system.
2 Replace the four (M2 x 2.7) screws to secure the hard drive to the system.
3 Connect the hard drive cable to the connector on the system board.
4 Install the :
a battery
b base cover
5 Follow the procedures in After working inside your system.
Coin-cell battery
Removing the coin cell battery
1 Follow the procedure in Before working inside your computer.
2 Remove the :
a base cover
b battery
3 To remove the coin cell battery:
a Disconnect the coin cell battery cable from the connector on the system board [1].
b Lift the coin cell battery to release from the adhesive and lift it away from the system board [2].
Removing and installing components
19