Owners Manual

Installing the WWAN card
1 Insert the WWAN card into the slot on the system.
2 Connect the WWAN antenna cables to the connectors on the WWAN card.
3 Replace the screw (M2X3) to secure the WWAN card to the computer.
4 Install the :
a battery
b base cover
5 Follow the procedure in After working inside your computer.
Memory modules
Removing the memory module
1 Follow the procedure in Before working inside your computer.
2 Remove the :
a base cover
b battery
3 To remove the memory module:
a Pry the clips securing the memory module until the memory module pops-up [1].
b Lift the memory module from the connector [2].
24
Removing and installing components