Owners Manual

Installing the heat sink

NOTE

: This procedure is only for the UMA model.

1 Place the heat sink on the system board.

2 Replace the four (M2x3) screws that secure the heat sink on the system board.

NOTE

• Replace the heat sink screws in sequential order as indicated on the heat-sink.

3 Install the :

a battery

b base cover

4 Follow the procedure in After working inside your computer.

System fan

Removing the system fan

NOTE

: This procedure is only for the UMA model

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

c hard drive

d SSD card

e SSD frame

Removing and installing components