Owners Manual

Display (eDP) cable

Removing display cable

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

c WLAN card

d WWAN card (optional)

e display hinge cover

f display assembly

g display bezel

h display panel

3 Disconnect the camera cable from the connector on the camera module [1].

4 Peel the display cable to release it from adhesive and lift the display cable from the display back cover [2].

Installing display cable

1 Ax the display cable to the display back cover.

2 Connect the camera cable to the connector on camera module.

3 Install the:

a display panel

b display bezel

c display assembly

d display hinge cover

Removing and installing components