Owners Manual

Installing camera

1 Insert the camera into the slot on the display back cover.

2 Connect the camera cable to the connector on the camera module.

3 Install the :

a display panel

b display bezel

c display assembly

d display hinge cover

e WLAN card

f WWAN card (optional)

h battery

i base cover

4 Follow the procedure in After working inside your computer.

Display hinges

Removing display hinge

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

c WLAN card

d WWAN card (optional)

e display assembly

f display bezel

g display hinge cover

3 To remove the display hinge:

a Remove the 3 (M2.5x3) screws that secure the display hinge to the display assembly [1].

b Lift the display hinge from the display assembly [2].

c Repeat step a and step b to remove the other display hinge.

Removing and installing components