Dell Latitude 5511 Service Manual Regulatory Model: P80G Regulatory Type: P80F004
Opombe, svarila in opozorila OPOMBA: OPOMBA označuje pomembne informacije, ki vam pomagajo bolje izkoristiti računalnik. POZOR: SVARILO označuje možnost poškodb strojne opreme ali izgube podatkov in svetuje, kako se izogniti težavi. OPOZORILO: OPOZORILO označuje možnost poškodb lastnine, osebnih poškodb ali smrti. © 2020 Dell Inc. ali njegove podružnice Vse pravice pridržane. Dell, EMC in druge blagovne znamke so blagovne znamke družbe Dell Inc. ali njenih hčerinskih družb.
Contents 1 Delo z računalnikom...................................................................................................................... 6 Varnostna navodila................................................................................................................................................................ 6 Preden začnete delo v notranjosti računalnika............................................................................................................ 6 Varnostni ukrepi........
Odstranjevanje pogona SSD.........................................................................................................................................49 Nameščanje pogona SSD............................................................................................................................................. 50 Notranji okvir.......................................................................................................................................................................
Odpravljanje težav.................................................................................................................... 129 Diagnostika z izboljšanim predzagonskim ocenjevanjem sistema (ePSA).................................................................. 129 Potek zagona diagnostičnega orodja ePSA.............................................................................................................. 129 Sistemske diagnostične lučke...................................................
1 Delo z računalnikom Varnostna navodila Zahteve Uporabite naslednja varnostna navodila, da zaščitite računalnik pred morebitnimi poškodbami in zagotovite lastno varnost. Če ni označeno drugače, postopki v tem dokumentu predpostavljajo, da veljajo naslednji pogoji: • • prebrali ste varnostna navodila, priložena vašemu računalniku. Komponento lahko zamenjate ali – če ste jo kupili ločeno – namestite tako, da postopek odstranitve izvedete v obratnem vrstnem redu.
POZOR: Če želite izklopiti omrežni kabel, najprej odklopite kabel iz računalnika in nato iz omrežne naprave. 5. Računalnik in vse priključene naprave izključite naprave iz električnih vtičnic. 6. Medtem ko je računalnik izklopljen, pridržite gumb za vklop, da ozemljite sistemsko ploščo. OPOMBA: Elektrostatično razelektritev preprečite tako, da se ozemljite z uporabo traku za ozemljitev ali občasno dotaknete nepobarvane kovinske površine, medtem ko se hkrati dotaknete priključka na hrbtni strani računalnika.
• • • Vse take dele hranite v prostoru, ki je varen pred elektrostatično razelektritvijo. Če je mogoče, uporabite antistatično preprogo in podlogo za delovno mizo. Pri odpakiranju dela, ki je občutljiv na statično elektriko, ga iz antistatične embalaže ne odstranjujte, dokler niste pripravljeni na njegovo namestitev. Preden odstranite antistatično embalažo, morate opraviti postopek, s katerim ozemljite telo. Pri prenašanju občutljivih delov jih najprej vstavite v antistatično posodo ali embalažo.
Transport občutljivih delov Za transport občutljivih delov ESD, na primer nadomestnih delov ali delov, ki jih vračate Dellu, morate dele obvezno pakirati v antistatično embalažo. Dvigovanje opreme Za dvigovanje težke opreme upoštevajte napotke: POZOR: Ne dvigujte bremen, težjih od 25 kg (50 funtov). Poiščite dodatno pomoč ali uporabite napravo za dvigovanje. 1. 2. 3. 4. 5. Postavite se v stabilen položaj.
2 Tehnologija in komponente OPOMBA: Navodila v tem razdelku veljajo za računalnike, dobavljene z operacijskim sistemom Windows 10.Operacijski sistem Windows 10 je tovarniško nameščen v tem računalniku. Teme: • • • • DDR4 USB Type-C HDMI 2.0 Delovanje lučke LED gumba za vklop DDR4 Pomnilnik DDR4 (dvojna hitrost prenosa četrte generacije) je hitrejši naslednik tehnologij DDR2 in DDR3, ki v primerjavi s 128 GB zmogljivosti na režo DIMM pri pomnilniku DDR3 omogoča zmogljivost do 512 GB.
Zaobljen rob Moduli DDR4 imajo zaobljen rob, ki poskrbi za preprostejše vstavljanje in zmanjšanje pritiska na ploščo tiskanega vezja med nameščanjem pomnilnika. Skica 3. Zaobljen rob Napake pomnilnika Pri napakah pomnilnika v sistemu je prikazana nova koda napake »ON-FLASH-FLASH« ali »ON-FLASH-ON«. Če je napaka pri vseh pomnilniških modulih, se zaslon LCD ne vklopi.
Thunderbolt prek priključka USB Type-C Vrata Thunderbolt so strojni vmesnik za prenos podatkov, videa, zvoka in napajanja prek enega priključka. Vrata Thunderbolt združujejo PCI Express (PCIe) in DisplayPort (DP) v enem signalu skupaj z možnostjo enosmernega napajanja z enim kablom. Vrata Thunderbolt 1 in Thunderbolt 2 uporabljajo enak priključek kot miniDP (DisplayPort) za priklop zunanjih naprav, vrata Thunderbolt 3 uporabljajo priključek USB Type-C. Skica 4. Thunderbolt 1 in Thunderbolt 3 1.
HDMI 2.0 Ta tema pojasnjuje HDMI 2.0 ter njegove lastnosti in prednosti. HDMI (High-Definition Multimedia Interface) je razširjen, nestisnjen digitalni vmesnik za zvok in sliko. HDMI je vmesnik med združljivim digitalnim virom za zvok in sliko, kot je na primer predvajalnik DVD-jev, ali sprejemnikom zvoka in slike ter združljivim monitorjem za digitalni zvok in/ali sliko, kot je digitalni televizor (DTV). Namenjena uporaba za televizorje in prevajalnike DVD-jev s HDMI-jem.
• • • • • • • Ob pritisku gumba za vklop zasvetijo lučke LED sistema. Vse razpoložljive lučke LED (osvetlitev tipkovnice/lučka LED na tipkovnici za funkcijo Caps Lock/lučka LED za polnjenje baterije) zasvetijo in prikazujejo določeno delovanje. Zvočni ton je privzeto izklopljen. Omogočite ga lahko v nastavitvi BIOS-a. Časovna omejitev varnostnih postopkov ne poteče, če se naprava med zagonom neha odzivati. Logotip Dell: vklopi se v 2 sekundah po pritisku gumba za vklop.
• Lučke LED za vrata RJ45: • Tabela 1.
3 Glavne komponente sistema 1. pokrov osnovne plošče 3. Vrata za napajanje 16 Glavne komponente sistema 2. Kovinski nosilec vrat za napajanje 4.
5. 7. 9. 11. 13. 15. 17. 19. Ventilator hladilnika Notranji okvir Tipkovnica Baterija Zvočniki Sklop zaslona Pogon SSD Gumbasta baterija 6. Pomnilniški moduli 8. Nosilec pomnilnika 10. Nosilec za tipkovnico 12. Bralnik pametnih kartic 14. Gumba sledilne tablice 16. Sklop naslona za dlani 18. Toplotna plošča pogona SSD 20. Kartica WWAN OPOMBA: Dell zagotavlja seznam komponent in njihovih številk delov za izvirno kupljeno konfiguracijo sistema.
4 Razstavljanje in sestavljanje pokrov osnovne plošče Odstranjevanje pokrova osnovne plošče Zahteve 1. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. O tem opravilu Slika označuje, kje je pokrov računalnika in vizualno predstavitev postopka odstranitve.
Razstavljanje in sestavljanje 19
Razstavljanje in sestavljanje
Koraki 1. Odvijte pet zaskočnih vijakov (M2.5x6.3) in tri zaskočne vijake (M2.5x8), s katerimi je pokrov osnovne plošče pritrjen na računalnik. 2. Pri desnem tečaju začnite privzdigovati pokrov osnovne plošče. 3. Pokrov osnovne plošče dvignite z računalnika. Nameščanje pokrova osnovne plošče Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove. O tem opravilu Slika kaže, kje je pokrov računalnika in vizualno predstavitev postopka namestitve.
Razstavljanje in sestavljanje
Razstavljanje in sestavljanje 23
Koraki 1. Pokrov osnovne plošče položite na sklop naslona za dlani in tipkovnice ter ga pritisnite, da se zaskoči. 2. Znova namestite pet zaskočnih vijakov (M2.5x6.3) in tri zaskočne vijake (M2.5x8), da pokrov osnovne plošče pritrdite na računalnik. Naslednji koraki 1. Upoštevajte navodila v razdelku Ko končate delo v notranjosti računalnika. baterijo Varnostni ukrepi glede litijevih-ionskih baterij POZOR: • Pri delu z litij-ionskimi baterijami bodite posebej previdni.
Koraki 1. Odklopite kabel baterije s sistemske plošče.
2. Odvijte zaskočni vijak (M2x6), s katerim je baterija pritrjena na računalnik. 3. Baterijo dvignite z računalnika. Nameščanje baterije Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove. O tem opravilu Slika označuje, kje je baterija in vizualno predstavitev postopka namestitve.
Razstavljanje in sestavljanje 27
Koraki 1. Baterijo postavite na sklop naslona za dlani in tipkovnice ter odprtine za vijake na bateriji poravnajte z odprtinami za vijake na sklopu naslona za dlani in tipkovnice. 2. Znova namestite zaskočni vijak (M2x6), s katerim je baterija pritrjena na računalnik. 3. Kabel baterije priklopite na sistemsko ploščo. Naslednji koraki 1. Namestite pokrov osnovne plošče. 2. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika.
Koraki 1. S konicami prstom pazljivo razširite pritrdilni sponki na vsaki strani reže pomnilniškega modula, dokler pomnilniški modul ne izskoči. 2. Pomnilniški modul potisnite in odstranite iz reže pomnilniškega modula na sistemski plošči. Nameščanje pomnilniških modulov Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove. O tem opravilu Slika označuje, kje je pomnilniški modul, in vizualno prikazuje postopek namestitve.
Koraki 1. Poravnajte zarezo na pomnilniškem modulu z jezičkom na reži pomnilniškega modula. 2. Pomnilniški modul pod kotom močno potisnite v režo. 3. Pomnilniški modul potisnite navzdol, da se zaskoči na svoje mesto. OPOMBA: Če ne slišite klika, pomnilniški modul odstranite in ga ponovno namestite. Naslednji koraki 1. Namestite baterijo. 2. Namestite pokrov osnovne plošče. 3. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika.
kartico WLAN Odstranjevanje kartice WLAN Zahteve 1. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. 2. Odstranite pokrov osnovne plošče. 3. Odstranite baterijo. O tem opravilu Slika kaže, kje je kartica WLAN in vizualno predstavitev postopka odstranitve.
Razstavljanje in sestavljanje
Koraki 1. Poiščite kartico WLAN v računalniku. 2. Odvijte vijak (M2x3), s katerim je pritrjen nosilec brezžične omrežne enote. 3. Nosilec brezžične omrežne kartice odstranite iz računalnika. 4. Kable brezžične omrežne kartice odklopite iz modula brezžične omrežne kartice. 5. Brezžično omrežno kartico odstranite iz računalnika. Nameščanje kartice WLAN Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove.
Razstavljanje in sestavljanje
Koraki 1. V računalniku poiščite režo za brezžično omrežno kartico. 2. Brezžično omrežno kartico potisnite v režo na sistemski plošči. 3. Kable brezžične omrežne kartice priključite na brezžični omrežni modul. 4. Nosilec brezžične omrežne kartice postavite na brezžično omrežno kartico in jo pritrdite z vijakom (M2x3). Naslednji koraki 1. Namestite baterijo. 2. Namestite pokrov osnovne plošče. 3. Upoštevajte navodila v razdelku Ko končate delo v notranjosti računalnika.
Razstavljanje in sestavljanje
Koraki 1. Poiščite enoto WWAN v računalniku. 2. Odvijte vijak (M2x3), s katerim je kovinski nosilec za WWAN pritrjen na računalnik. 3. Kovinski nosilec za WWAN dvignite stran od računalnika. 4. Kable za WWAN odklopite z modula kartice WWAN. 5. Kartico WWAN potisnite iz sistema. Nameščanje kartice WWAN Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove.
Razstavljanje in sestavljanje
Koraki 1. V računalniku poiščite režo za kartico WWAN. 2. Kartico WWAN potisnite v režo na računalniku. 3. Kable za WWAN priključite na modul kartice WWAN. 4. Kovinski nosilec za WWAN postavite na modul kartice WWAN. 5. Znova namestite vijak (M2x3), da modul pritrdite na računalnik. Naslednji koraki 1. Namestite baterijo. 2. Namestite pokrov osnovne plošče. 3. Upoštevajte navodila v razdelku Ko končate delo v notranjosti računalnika. Trdi disk Odstranjevanje trdega diska Zahteve 1.
Koraki 1. Poiščite trdi disk v računalniku. 2. Iz sistemske plošče odklopite kabel trdega diska. 3. Odvijte štiri vijake (M2x2.7), s katerimi je trdi disk pritrjen na sistemsko ploščo. 4. Trdi disk odstranite iz računalnika.
Nameščanje trdega diska Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove. O tem opravilu Slika kaže, kje je trdi disk in vizualno predstavitev postopka namestitve.
Koraki 1. V računalniku poiščite režo za sistemsko ploščo. 2. Trdi disk poravnajte in namestite v računalniku. 3. Privijte štiri vijake (M2x2.7), s katerimi je trdi disk pritrjen v računalnik. 4. Kabel trdega diska priključite v priključek na sistemski plošči. Naslednji koraki 1. Namestite baterijo. 2. Namestite pokrov osnovne plošče. 3. Upoštevajte navodila v razdelku Ko končate delo v notranjosti računalnika. Gumbasta baterija Odstranjevanje gumbaste baterije Zahteve 1.
Koraki 1. Poiščite gumbasto baterijo v računalniku. 2. Kabel gumbaste baterije odklopite iz sistemske plošče. 3. Gumbasto baterijo dvignite iz računalnika. Nameščanje gumbaste baterije Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove. O tem opravilu Slika kaže, kje je gumbasta baterija in vizualno predstavitev postopka namestitve.
Koraki 1. V računalniku poiščite režo za gumbasto baterijo. 2. Gumbasto baterijo pritrdite v režo. 3. Kabel gumbaste baterije priključite na sistemsko ploščo. Naslednji koraki 1. Namestite baterijo. 2. Namestite pokrov osnovne plošče. 3. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika.
Vrata za napajanje Odstranjevanje vhoda za enosmerno napajanje Zahteve 1. 2. 3. 4. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. Odstranite pokrov osnovne plošče. Odstranite baterijo. Odstranite hladilnik. O tem opravilu Slika kaže, kje so vrata za napajanje in vizualno predstavitev postopka odstranitve.
Razstavljanje in sestavljanje
Koraki 1. V računalniku poiščite vrata za napajanje. 2. Odvijte vijaka (M2x5), s katerima je pritrjen kovinski nosilec vrat za napajanje. 3. Kovinski nosilec vrat za napajanje dvignite iz računalnika. 4. Z matične plošče odklopite kabel DC-in. 5. Vrata za napajanje odstranite iz računalnika. Nameščanje vrat za napajanje Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove.
Razstavljanje in sestavljanje
Koraki 1. V računalniku poiščite režo za vrata za napajanje. 2. Vrata za napajanje vstavite v režo na računalniku. 3. Kabel enosmernega vhoda za napajanje priključite na sistemsko ploščo. 4. Na vrata za napajanje namestite kovinski nosilec vrat za napajanje. 5. Privijte vijaka (M2x5), s katerima je kovinski nosilec vhoda za napajanje pritrjen na sistemsko ploščo. Naslednji koraki 1. 2. 3. 4. Namestite hladilnik (samo za ločeni hladilnik). Namestite baterijo. Namestite pokrov osnovne plošče.
Koraki 1. V računalniku poiščite pogon SSD. 2. Odvijte vijaka (M2x3), s katerima je modul SSD pritrjen na računalnik. 3. Odstranite toplotno ploščo pogona SSD in pogon SSD potisnite iz računalnika. Nameščanje pogona SSD Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove. O tem opravilu Slika kaže, kje je SSD in vizualno predstavitev postopka namestitve.
Koraki 1. V računalniku poiščite režo za pogon SSD. 2. Pogon SSD potisnite v režo. 3. Toplotno ploščo pogona SSD postavite nad modul SSD. 4. Znova namestite vijaka (M2x3), s katerima je modul SSD pritrjen v računalnik. Naslednji koraki 1. Namestite baterijo. 2. Namestite pokrov osnovne plošče. 3. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika.
Notranji okvir Odstranjevanje notranjega okvirja Zahteve 1. 2. 3. 4. 5. 6. 7. Upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Odstranite pokrov osnovne plošče. Odstranite baterijo. Odstranite pogon SSD. Odstranite trdi disk. Odstranite kartico WLAN. Odstranite kartico WWAN. O tem opravilu Slika kaže, kje je notranji okvir in vizualno predstavitev postopka odstranitve.
Razstavljanje in sestavljanje 53
Koraki 1. V računalniku poiščite sistemsko ploščo. 2. Kable kartice WWAN in brezžične omrežne kartice odstranite iz vodilnih sponk. 3. Odklopite in odstranite kabel za zvočnik.
4. Odvijte pet vijakov (M2x5) in šest vijakov (M2x3), s katerimi je notranji okvir pritrjen na računalnik. 5. Zunanji okvir dvignite iz računalnika. Nameščanje notranjega okvirja Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove. O tem opravilu Slika kaže, kje je notranji okvir in vizualno predstavitev postopka namestitve.
Razstavljanje in sestavljanje
Koraki 1. V računalniku poiščite režo za notranji okvir. 2. Notranji okvir poravnajte in namestite v režo na računalniku. 3. Privijte pet vijakov (M2x5) in šest vijakov (M2x3), s katerimi je notranji okvir pritrjen na računalnik.
4. Kable kartice WWAN in brezžične omrežne kartice napeljite skozi zadrževalne sponke na okviru. 5. Kabel zvočnika napeljite skozi zadrževalne sponke in ga priključite na sistemsko ploščo. Naslednji koraki 1. 2. 3. 4. 5. 6. 7. Namestite kartico WWAN. Namestite kartico WLAN. Namestite trdi disk. Namestite pogon SSD. Namestite baterijo. Namestite pokrov osnovne plošče. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika.
Koraki 1. V računalniku poiščite ploščo z gumbi sledilne tablice. 2. Odprite zaklep in kabel plošče bralnika pametnih kartic odklopite iz sistemske plošče.
3. Odprite zaklep in kabel gumbov sledilne tablice odklopite iz priključka. 4. Odvijte vijaka (M2x3), s katerima so gumbi sledilne tablice pritrjeni na naslon za dlani. 5. Gumbe sledilne tablice dvignite iz računalnika. Nameščanje gumbov sledilne tablice Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove. O tem opravilu Slika kaže, kje so gumbi sledilne tablice in vizualno predstavitev postopka namestitve.
Koraki 1. V računalniku poiščite režo za gumbe sledilne tablice. 2. Gumbe sledilne tablice poravnajte in namestite v režo na računalniku.
3. Kabel gumbov sledilne tablice priključite na priključek v računalniku in zaprite zaklep. 4. Privijte vijaka (M2x3), da gumbe sledilne tablice pritrdite na računalnik. 5. Kabel bralnika pametnih kartic priključite na priključek zanj in zaprite zaklep. Naslednji koraki 1. 2. 3. 4. 5. 6. 7. 8. Namestite notranji okvir. Namestite kartico WWAN. Namestite kartico WLAN. Namestite trdi disk. Namestite pogon SSD. Namestite baterijo. Namestite pokrov osnovne plošče.
Razstavljanje in sestavljanje 63
Koraki 1. V računalniku poiščite ploščo bralnika pametnih kartic. 2. Odprite zaklep in kabel plošče bralnika pametnih kartic odklopite iz sistemske plošče. 3. Odvijte štiri vijake (M2x3), s katerimi je plošča bralnika pametnih kartic pritrjena na računalnik. 4. Modul bralnika pametnih kartic dvignite z računalnika. Nameščanje plošče bralnika pametnih kartic Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove.
Razstavljanje in sestavljanje 65
Koraki 1. V računalniku poiščite režo za ploščo bralnika pametnih kartic. 2. Ploščo bralnika pametnih kartic poravnajte in namestite v režo na računalniku. 3. Privijte štiri vijake (M2x3), s katerimi je plošča bralnika pametnih kartic pritrjen na računalnik. 4. Kabel bralnika pametnih kartic priključite v priključek na sistemski plošči in zaprite zaklep. Naslednji koraki 1. 2. 3. 4. 5. 6. 7. 8. Namestite notranji okvir. Namestite kartico WWAN. Namestite kartico WLAN. Namestite trdi disk.
Koraki 1. V računalniku poiščite ploščo z gumbi sledilne tablice. 2. Odprite zaklep in kabel plošče bralnika pametnih kartic odklopite iz sistemske plošče.
3. Odprite zaklep in kabel gumbov sledilne tablice odklopite iz priključka. 4. Odvijte vijaka (M2x3), s katerima so gumbi sledilne tablice pritrjeni na naslon za dlani. 5. Gumbe sledilne tablice dvignite iz računalnika. Nameščanje gumbov sledilne tablice Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove. O tem opravilu Slika kaže, kje so gumbi sledilne tablice in vizualno predstavitev postopka namestitve.
Koraki 1. V računalniku poiščite režo za gumbe sledilne tablice. 2. Gumbe sledilne tablice poravnajte in namestite v režo na računalniku.
3. Kabel gumbov sledilne tablice priključite na priključek v računalniku in zaprite zaklep. 4. Privijte vijaka (M2x3), da gumbe sledilne tablice pritrdite na računalnik. 5. Kabel bralnika pametnih kartic priključite na priključek zanj in zaprite zaklep. Naslednji koraki 1. 2. 3. 4. 5. 6. 7. 8. Namestite notranji okvir. Namestite kartico WWAN. Namestite kartico WLAN. Namestite trdi disk. Namestite pogon SSD. Namestite baterijo. Namestite pokrov osnovne plošče.
Razstavljanje in sestavljanje 71
Koraki 1. Poiščite ploščo z diodami LED v računalniku. 2. Odprite zaklep in kabel plošče z diodami LED odklopite iz sistemske plošče. 3. Odlepite kabel plošče z diodami LED. OPOMBA: Kabel plošče z diodami LED je na računalnik pritrjen z lepilnim trakom. 4. Odvijte vijak (M2x3), s katerim je plošča z diodami LED pritrjena na računalnik. 5. Ploščo z diodami LED dvignite iz računalnika.
Razstavljanje in sestavljanje 73
Koraki 1. V računalniku poiščite režo za ploščo z diodami LED. 2. Ploščo z diodami LED poravnajte in namestite v režo na računalniku. 3. Privijte vijak (M2x3), s katerim je plošča z diodami LED pritrjena na računalnik. 4. Kabel plošče z diodami LED pritrdite na lepilni trak na računalniku. 5. Kabel plošče z diodami LED priključite v priključek na sistemski plošči. Naslednji koraki 1. 2. 3. 4. 5. 6. 7. 8. Namestite notranji okvir. Namestite kartico WWAN. Namestite kartico WLAN. Namestite trdi disk.
Razstavljanje in sestavljanje 75
Koraki 1. Poiščite zvočnika v računalniku. 2. Kable zvočnikov odstranite iz zadrževalnih sponk na računalniku. 3. Zvočnike dvignite iz računalnika. Nameščanje zvočnikov Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove. O tem opravilu Slika kaže, kje sta zvočnika in vizualno predstavitev postopka namestitve.
Razstavljanje in sestavljanje 77
Koraki 1. Poiščite režo za zvočnike v računalniku. 2. Poravnajte zvočnike in jih namestite v režo na računalniku. 3. Kable zvočnikov napeljite skozi zadrževalne sponke na računalniku. Naslednji koraki 1. 2. 3. 4. 5. 6. 7. 8. 9. Namestite ploščo z diodami LED. Namestite notranji okvir. Namestite kartico WWAN. Namestite kartico WLAN. Namestite trdi disk. Namestite pogon SSD. Namestite baterijo. Namestite pokrov osnovne plošče. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika.
Razstavljanje in sestavljanje 79
Koraki 1. V računalniku poiščite sklop hladilnika. 2. Odvijte zaskočna vijaka (M2x5) in šest zaskočnih vijakov (M2x3), s katerimi je sklop hladilnika pritrjen na računalnik. 3. S sistemske plošče odklopite kabel ventilatorja hladilnika. 4. Sklop hladilnika dvignite iz računalnika. 5. Odvijte vijak (M2x5), s katerim je ventilator hladilnika pritrjen na sklop hladilnika. 6. Ventilator hladilnika dvignite s sklopa hladilnika.
Nameščanje sklopa hladilnika – ločeno Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove. O tem opravilu Slika kaže, kje je hladilnik in vizualno predstavitev postopka namestitve.
Razstavljanje in sestavljanje
Koraki 1. Poiščite režo za hladilnik v računalniku. 2. Poravnajte ventilator hladilnika in ga namestite na sklop hladilnika. 3. Privijte vijak (M2x5), s katerim je ventilator hladilnika pritrjen na sklop hladilnika. 4. Poravnajte sklop hladilnika in ga namestite v režo na računalniku. 5. Privijte vijaka (M2x5) in šest vijakov (M2x3), da sklop hladilnika pritrdite na računalnik. OPOMBA: Vijake privijajte, kot je navedeno na seznamu na hladilniku. 6.
Razstavljanje in sestavljanje
Razstavljanje in sestavljanje 85
Koraki 1. V računalniku poiščite sistemsko ploščo. 2. Odvijte vijak (M2x3), s katerim je pritrjen kovinski nosilec bralnika prstnih odtisov. 3. Kovinski nosilec bralnika prstnih odtisov odstranite iz računalnika in obrnite tipalo bralnika prstnih odtisov. 4. S sistemske plošče odklopite kabel kamere. 5. Odvijte vijaka, s katerima je pritrjen kovinski nosilec za EDP. 6. Kovinski nosilec za EDP dvignite iz računalnika. 7. Odlepite trak, s katerim je kabel zaslona pritrjen na sistemsko ploščo. 8.
Razstavljanje in sestavljanje 87
Razstavljanje in sestavljanje
Koraki 1. V računalniku poiščite režo za sistemsko ploščo. 2. Vrata na sistemski plošči potisnite v reže na sklopu naslona za dlani in tipkovnice ter odprtine za vijake na sistemski plošči poravnajte z odprtinami za vijake na sklopu naslona za dlani in tipkovnice. 3. Namestite štiri vijake (M2x3), s katerimi je sistemska plošča pritrjena na sklop naslona za dlani in tipkovnice. 4. Tipalo bralnika prstnih odtisov poravnajte in namestite v režo na računalniku. 5.
Koraki 1. V računalniku poiščite tipkovnico. 2. Odprite zaklep in kable tipkovnice in osvetlitve tipkovnice odklopite z naslona za dlani. 3. Odvijte 22 vijakov (M2x2), s katerimi je tipkovnica pritrjena na ohišje računalnika.
4. Tipkovnico dvignite iz računalnika. Nameščanje tipkovnice Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove. O tem opravilu Slika kaže, kje je tipkovnica in vizualno predstavitev postopka namestitve.
Koraki 1. Poiščite režo za tipkovnico v računalniku. 2. Tipkovnico poravnajte in namestite v režo na računalniku. 3. Privijte 22 vijakov (M2x2), s katerimi je tipkovnica pritrjena na ohišje računalnika.
4. Kable tipkovnice in osvetlitve tipkovnice odklopite priključite na priključek na naslonu za dlani. Naslednji koraki 1. Namestite sistemsko ploščo. OPOMBA: Sistemsko ploščo lahko odstranite tudi, če je nanjo pritrjen hladilnik. 2. 3. 4. 5. 6. 7. 8. 9. 10. Namestite pomnilniški modul Namestite notranji okvir. Namestite kartico WWAN. Namestite kartico WLAN. Namestite trdi disk. Namestite pogon SSD. Namestite baterijo. Namestite pokrov osnovne plošče.
Koraki 1. V računalniku poiščite nosilec za tipkovnico. 2. Odvijte enajst vijakov (M2x2), s katerimi je nosilec tipkovnice pritrjen na sklop tipkovnice. 3. Tipkovnico dvignite z nosilca tipkovnice.
Nameščanje nosilca za tipkovnico Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove. O tem opravilu Slika označuje, kje je nosilec za tipkovnico in vizualno predstavitev postopka namestitve.
Koraki 1. V računalniku poiščite režo nosilca za tipkovnico. 2. Tipkovnico poravnajte in namestite na nosilec za tipkovnico. 3. Pritisnite na zaskočne točke na okviru, da sklop tipkovnice pritrdite na naslon za dlani.
OPOMBA: Tipkovnica ima na okviru več zaskočnih točk, ki jih morate po vnovični namestitvi tipkovnice čvrsto pritisniti. 4. Privijte enajst vijakov (M2x2), da tipkovnico pritrdite na nosilec za tipkovnico. Naslednji koraki 1. Namestite tipkovnico. 2. Namestite sistemsko ploščo. OPOMBA: Sistemsko ploščo lahko odstranite tudi, če je nanjo pritrjen hladilnik. 3. 4. 5. 6. 7. 8. 9. 10. 11. Namestite pomnilniški modul. Namestite notranji okvir. Namestite kartico WWAN. Namestite kartico WLAN. Namestite trdi disk.
Koraki 1. V računalniku poiščite gumb za vklop z bralnikom prstnih odtisov. 2. Odvijte vijaka (M2x2), s katerima je gumb za vklop pritrjen na ohišje računalnika. 3. Gumb za vklop z bralnikom prstnih odtisov dvignite iz računalnika. Nameščanje gumba za vklop z bralnikom prstnih odtisov Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove.
Koraki 1. V računalniku poiščite režo za gumb za vklop z bralnikom prstnih odtisov. 2. Gumb za vklop z bralnikom prstnih odtisov poravnajte in namestite v režo na računalniku. 3. Privijte vijaka (M2x2), s katerima je gumb za vklop pritrjen na ohišje računalnika. Naslednji koraki 1. 2. 3. 4. 5. 6. 7. 8. 9. Namestite sistemsko ploščo. Namestite pomnilniški modul. Namestite notranji okvir. Namestite kartico WWAN. Namestite kartico WLAN. Namestite trdi disk. Namestite pogon SSD. Namestite baterijo.
10. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Sklop zaslona Odstranjevanje sklopa zaslona Zahteve 1. 2. 3. 4. 5. Upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Odstranite pokrov osnovne plošče. Odstranite baterijo. Odstranite kartico WLAN. Odstranite kartico WWAN. O tem opravilu Slika označuje, kje je sklop zaslona in vizualno predstavitev postopka odstranitve.
Razstavljanje in sestavljanje 101
Razstavljanje in sestavljanje
Razstavljanje in sestavljanje 103
Razstavljanje in sestavljanje
Koraki 1. V računalniku poiščite kabel zaslona, kabel zaslona na dotik in tečaje zaslona. 2. Odlepite trak in iztaknite kabel zaslona na dotik. 3. Odvijte vijaka (M2x3), s katerima je kovinski nosilec eDP pritrjen na računalnik. 4. Odlepite trak, s katerim je kabel zaslona pritrjen na sistemsko ploščo. 5. Odprite zaklep in kabel zaslona odklopite s sistemske plošče. 6. Kabla za brezžično omrežje in WWAN izvlecite iz zadrževalnih sponk. 7. Odvijte šest vijakov (M2.
Razstavljanje in sestavljanje
Razstavljanje in sestavljanje 107
Razstavljanje in sestavljanje
Razstavljanje in sestavljanje 109
Koraki 1. Sklop zaslona postavite na čisto in ravno površino. 2. Poravnajte sklop naslona za dlani in tipkovnice in ga namestite na sklop zaslona. 3. S pomočjo oznak za poravnavo zaprite tečaje zaslona. 4. Kabel zaslona priklopite na sistemsko ploščo in prilepite trak, da pritrdite kabel zaslona. 5. Na priključek kabla zaslona postavite kovinski nosilec za EDP. 6. Znova namestite vijaka (M2x3), da kovinski nosilec EDP pritrdite na sistemsko ploščo. 7.
Razstavljanje in sestavljanje 111
Koraki 1. S plastičnim peresom privzdignite spodnji rob okvira zaslona – začnite pri utorih v bližini tečajev. 2. Nadaljujte s privzdigovanjem robov okvira zaslona, da ga sprostite s sklopa hrbtnega pokrova zaslona in anten. 3. Okvir zaslona odstranite s sklopa hrbtnega pokrova zaslona in antene. Nameščanje okvira zaslona Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove.
Razstavljanje in sestavljanje 113
Koraki Okvir zaslona poravnajte s sklopom hrbtnega pokrova zaslona in antene ter okvir zaslona previdno pritisnite, da se zaskoči. Naslednji koraki 1. 2. 3. 4. 5. 6. Namestite sklop zaslona. Namestite kartico WWAN. Namestite kartico WLAN. Namestite baterijo. Namestite pokrov osnovne plošče. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Pokrova tečajev Odstranjevanje pokrovov tečajev Zahteve 1. 2. 3. 4. 5.
Razstavljanje in sestavljanje 115
Koraki 1. Na hrbtnem pokrovu zaslona poiščite pokrov tečaja. 2. Odvijte vijaka (M2x2.5), s katerima sta pokrova tečajev pritrjena na ohišje. 3. Stisnite pokrova tečajev, da ju sprostite iz zarez na hrbtnem pokrovu zaslona, nato ju potisnite navznoter, da ju odstranite s tečaja zaslona. Nameščanje pokrovov tečajev Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove.
Razstavljanje in sestavljanje 117
Koraki 1. Namestite pokrove tečajev in jih navzven potisnite na tečaje zaslona. 2. Znova namestite vijaka (M2x2.5), da pokrova tečajev pritrdite na tečaj zaslona. Naslednji koraki 1. 2. 3. 4. 5. 6. 7. Namestite okvir zaslona. Namestite sklop zaslona. Namestite kartico WWAN. Namestite kartico WLAN. Namestite baterijo. Namestite pokrov osnovne plošče. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Plošča zaslona Odstranjevanje plošče zaslona Zahteve 1. 2. 3. 4. 5. 6. 7. 8.
Razstavljanje in sestavljanje 119
Razstavljanje in sestavljanje
Razstavljanje in sestavljanje 121
Koraki 1. Poiščite ploščo zaslona na sklopu hrbtnega pokrova zaslona. 2. Odvijte štiri vijake (M2.5x3.5), s katerimi je plošča zaslona pritrjena na sklop zaslona. 3. Ploščo zaslona dvignite in jo obrnite, da omogočite dostop do kabla zaslona. 4. S priključka kabla zaslona odlepite prevodni lepilni trak. 5. Dvignite zaklep in kabel zaslona izključite iz priključka na plošči zaslona. OPOMBA: Raztegljivih trakov (SR) ne vlecite in nato spustite s plošče zaslona. Nosilcev ni treba odstraniti s plošče zaslona.
Razstavljanje in sestavljanje 123
Razstavljanje in sestavljanje
Koraki 1. Kabel zaslona priključite v priključek in zaprite zaklep. 2. Prilepite lepilni trak, da pritrdite priključek kabla zaslona. 3. Prilepite prevodni lepilni trak, da pritrdite priključek kabla zaslona. 4. Znova namestite štiri vijake (M2.5x3.5), s katerimi je plošča zaslona pritrjena na sklop zaslona. Naslednji koraki 1. 2. 3. 4. 5. 6. 7. 8. Namestite pokrova tečajev zaslona. Namestite okvir zaslona. Namestite sklop zaslona. Namestite kartico WWAN. Namestite kartico WLAN. Namestite baterijo.
Koraki Po opravljenem postopku, opisanem v razdelku »Pred postopkom«, vam ostane sklop naslona za dlani in tipkovnice. Nameščanje sklopa naslona za dlani in tipkovnice Zahteve Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove. O tem opravilu Slika označuje, kje je sklop naslona za dlani in tipkovnice in vizualno predstavitev postopka namestitve.
Koraki Sklop naslona za dlani in tipkovnice položite na ravno površino. Naslednji koraki 1. 2. 3. 4. 5. 6. 7. Namestite sistemsko ploščo. Namestite sledilno tablico. Namestite vrata za enosmerno napajanje. Namestite gumb za vklop z bralnikom prstnih odtisov. Namestite sklop zaslona. Namestite zvočnika. Namestite ploščo z diodami LED.
8. 9. 10. 11. 12. 13. 14. 15. 16. 128 Namestite pomnilniški modul. Namestite notranji okvir. Namestite kartico WWAN. Namestite kartico WLAN. Namestite trdi disk. Namestite pogon SSD. Namestite baterijo. Namestite pokrov osnovne plošče. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika.
5 Odpravljanje težav Diagnostika z izboljšanim predzagonskim ocenjevanjem sistema (ePSA) O tem opravilu Diagnostični postopek ePSA (oziroma diagnostika sistema) izvede celovit pregled strojne opreme. Postopek ePSA je vdelan v BIOS in se zažene znotraj BIOS-a.
Lučka stanja napajanja in napolnjenosti baterije utripa rumeno in pojavljajo se kode piskov, ki nakazujejo napake. Lučka stanja napajanja in napolnjenosti baterije na primer dvakrat utripne oranžno, preneha svetiti ter nato trikrat utripne belo in znova preneha svetiti. Ta vzorec z 2 in nato 3 utripi se nadaljuje, dokler se računalnik ne izklopi, kar pomeni, da ni bil zaznan noben pomnilnik ali RAM.
6 Iskanje pomoči Teme: • Vzpostavljanje stika z družbo Dell Vzpostavljanje stika z družbo Dell Zahteve OPOMBA: Če nimate na voljo povezave z internetom, lahko podatke za stik najdete na računu o nakupu, embalaži, blagajniškem izpisku ali katalogu izdelkov Dell. O tem opravilu Dell ponuja več možnosti spletne in telefonske podpore ter servisa. Razpoložljivost je odvisna od države in izdelka, nekatere storitve pa morda niso na voljo na vašem območju.