Owners Manual

Steps
1. Align and place the speakers on the palm-rest assembly.
2. Route the speaker cable through the routing guide on palm-rest assembly.
Next steps
1. Install the assembly inner frame
2. Install the battery.
3. Install the base cover.
4. Install the microSD card.
5. Install the SIM card.
6. Follow the procedure in After working inside your computer.
System board
Removing the system board
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card.
3. Remove the microSD card.
4. Remove the base cover.
5. Remove the solid-state drive.
6. Remove the memory module.
7. Remove the WLAN card.
8. Remove the WWAN card.
9. Remove the heat sink.
10. Remove the battery.
11. Remove the system fan.
12. Remove the assembly inner frame.
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
56
Removing and installing components