Owners Manual
Table Of Contents
- Latitude 5520 Service Manual
- Contents
- Working inside your computer
- Major components of your computer
- Removing and installing components
- Recommended tools
- Screw list
- Subscriber Identity Module (SIM) card
- Micro Secure Digital (SD) Card
- Base cover
- WLAN card
- WWAN card
- Solid-state drive
- Memory modules
- Battery
- Battery cable
- Assembly inner frame
- LED board
- System fan
- Heat sink
- Removing the heat sink (for computers shipped with integrated graphics card)
- Installing the heat sink (for computers shipped with integrated graphics card)
- Removing the heat sink (for computers shipped with discrete graphics card)
- Installing the heat sink (for computers shipped with discrete graphics card)
- Speakers
- System board
- Power-button board
- Smart card reader
- Keyboard assembly
- Keyboard bracket
- Display assembly
- Display bezel
- Display panel
- Camera/microphone module
- eDP/display cable
- Sensor board
- Display hinges
- Display back cover
- Dummy SIM-card slot filler
- Palm-rest assembly
- Software
- BIOS setup
- Troubleshooting
- Getting help and contacting Dell
Steps
Place the palm-rest assembly on a flat surface.
Next steps
1. Install the dummy SIM-card slot filler (only for non-WWAN configuration).
2. Install the display assembly.
3. Install the keyboard assembly
4. Install the smart card reader.
5. Install the system board.
6. Install the battery.
7. Install the heat sink.
8. Install the system fan.
9. Install the assembly inner frame.
10. Install the WWAN card.
11. Install the WLAN card.
12. Install the base cover.
13. Install the microSD card.
14. Install the SIM card.
15. Follow the procedure in After working inside your computer.
94
Removing and installing components