Owners Manual

4. Adhere the tape on the battery connector[2].

5. Install the:

a. SD card

b. SIM

6. Follow the procedure in After working inside your tablet.

Sklop hladila procesora

Removing the heat sink assembly

Steps

1. Follow the procedure in Before working inside your tablet.

2. Remove the:

a. SD card

b. SIM

c. display panel

d. battery

3. To remove the heat-sink shield

a. Lift the left heat-sink shield [1] and right heat-sink shield [2] away from the heat-sink.

b. Unroute the WLAN card cables from the routing guides [2]..

Open the latch and disconnect the heat-sink fan cable from the connector on the system board [3]

Rastavljanje i ponovno sastavljanje