Reference Guide

5 - 8 Barcode Scanner Configuration Guide
IDC Width
Parameter Name: DocCap_WIDTH
SSI # F1h 56h
Parameter # 598
Specify the width of the region to capture. This parameter only applies when IDC Operating Mode is set to
Anchored.
Scan the bar code below, followed by four bar codes from Appendix B, Numeric Bar Codes in the range of
0010 to 1279. The default is 0300.
IDC Width
IDC Height
Parameter Name: DocCap_HEIGHT
SSI # F1h 57h
Parameter # 599
Specify the height of the region to capture. This parameter only applies when IDC Operating Mode is set to
Anchored.
Scan the bar code below, followed by four bar codes from Appendix B, Numeric Bar Codes in the range of
0010 to 1023. The default is 0050.
IDC Height