Reference Guide

Intelligent Document Capture 5 - 19
IDC Demonstrations
Anchored Mode Demo
Set parameters to these values:
Table 13-3 Anchored Mode Sample Parameter Values
Parameter
Value
IDC Operating Mode
Anchored
IDC Height
100
IDC Width
90
IDC X Coordinate
-175
IDC Y Coordinate
-50
• Pull the trigger. The barcode scanner decodes the bar code and captures an image of the text scroll.
• Rotate the form clockwise so the word Capture is along the bottom edge, and pull the trigger. The
barcode scanner decodes the bar code and captures the same image, including orientation. (This
example also works with the form rotated counter-clockwise or upside down).
• Modify the values for height, width, x, and y. Pull the trigger. The captured area changes in size and
location.
• Cover the bar code with a small piece of paper (or your finger) and pull the trigger. The barcode scanner
does not decode the bar code or capture an image.
What this demonstrates:
The Intelligent Document Capture Anchored mode captures an image of fixed size and location relative to
a bar code on the page. Parameters control the height, width, and location. The IDC firmware requires that
a bar code is present in order to capture an image, decodes it, and uses it to adjust the image to the
upright orientation.
Free-Form Mode Demo
Set IDC Operating Mode to Free-Form.
• Pull the trigger. The barcode scanner decodes the bar code and captures an image of the entire
rectangle, including the contents.
• Modify the values for height, width, x, and y. Pull the trigger. Note that the captured image is not affected.
• Rotate the form clockwise so the word Capture is along the bottom edge, and pull the trigger. The
barcode scanner decodes the bar code and captures the same image, including orientation. (This
example also works with the form rotated counter-clockwise or upside down).
• Cover the bar code with a small piece of paper and pull the trigger. The barcode scanner does not
decode the bar code and does not re-orient the captured image to the normal position, i.e., with the
Zebra logo in
upper-left corner.
What this demonstrates:
The Intelligent Document Capture Free-Form mode captures an image whose size and position are
determined by a rectangular border on the page. It adjusts the image to the upright orientation if a bar code
is found and decoded in the image.