Reference Guide

Imaging Preferences 2 - 7
Illumination Brightness
SSI # F1h 9Dh
Parameter # 669
This feature sets the brightness of the illumination by altering LED power. The default is 10, which is maximum
LED brightness. For values from 1 to 10, LED brightness varies from lowest to highest level of brightness.
To program Illumination Brightness, scan this bar code followed by two numeric bar codes in Appendix B,
Numeric Bar Codes that correspond to the value of desired illumination brightness. For example, to set
Illumination Brightness to 6, scan the bar code below followed by the 0 and 6 bar codes.
NOTE For the SE4710:
This feature sets the brightness of the illumination by altering LED power. The allowed range is from 1 to
27; LED brightness varies from lowest to highest level of brightness. The default is 7. Using a brightness
above 7 is not recommended, unless all thermal issues are considered.
Illumination Brightness