Reference Guide

Imaging Preferences 2 - 11
Snapshot Aiming Pattern
SSI # F0h 2Ch
Parameter # 300
Select Enable Snapshot Aiming Pattern to project the aiming pattern when in Snapshot Mode, or Disable
Snapshot Aiming Pattern to turn the aiming pattern off.
*Enable Snapshot Aiming Pattern
(01h)
Disable Snapshot Aiming Pattern
(00h)
Image Cropping
SSI # F0h 2Dh
Parameter # 301
This parameter crops a captured image. Select Disable Image Cropping to present the full 752 x 480 pixels
for the SE3300 and SE4500, the full 1280 x 800 pixels for the SE4710, and the full 1280 x 960 pixels for the
SE4750. Select Enable to crop the image to the pixel addresses set in Crop to Pixel Addresses on page 2-12.
NOTE The barcode scanner has a cropping resolution of 4 pixels. Setting the cropping area to less than 3 pixels
transfers the entire image.
Enable Image Cropping
(01h)
*Disable Image Cropping
(SE3300/SE4500: use full 752 x 480 pixels;
SE4710: use full 1280x800 pixels; SE4750:
use full 1280x960 pixels)
(00h)