Reference Guide

2 - 2 Barcode Scanner Configuration Guide
2 – 26 Barcode Scanner Configuration Guide
Signature Capture Width
SSI # F4h, F0h, 6Eh
Parameter # 366
The aspect ratio of the Signature Capture Width and Signature Capture Height parameters must match that of
the signature capture area. For example, a 4 x 1 inch signature capture area would require a 4 to 1 aspect ratio
of width to height.
To set the width of the signature capture box for the SE3300/SE4500, scan the Signature Capture Width for
the SE3300/SE4500 bar code, followed by 3 bar codes from Appendix B, Numeric Bar Codes corresponding
to a value in the range of 001 to 752 decimal.
To set the width of the signature capture box for the SE4710, and SE4750, scan the Signature Capture Width
for the SE4710/SE4750 bar code, followed by 4 bar codes from Appendix B, Numeric Bar Codes
corresponding to a value in the range of 0001 to 1280.
Signature Capture Width for the SE3300/SE4500
(Default: 400)
(001 - 752 Decimal)
Signature Capture Width for the SE4710/SE4750
(Default: 400)
(001 - 1280 Decimal)
Signature Capture Height
SSI # F4h, F0h, 6Fh
Parameter # 367
To set the height of the signature capture box, scan the Signature Capture Height bar code, followed by 3 bar
codes from Appendix B, Numeric Bar Codes corresponding to a value in the range of 001 to 480 decimal for
the SE3300/SE4500, 001 to 800 for the SE4710, and 001 to 960 for the SE4750.
Signature Capture Height (Default: 100)
(SE3300/SE4500: 001 - 480 Decimal)
(SE4710: 001 - 800 Decimal)
(SE4750: 001 - 960 Decimal)