Users Guide

Option Description

Default Setting: Not set

Strong Password

Enable strong password - This option is disabled by default.

Password Configuration This field controls the minimum and maximum number of characters allowed for the admin and

system passwords. Changes to these fields are not active until they are committed via the

apply button or saving changes before exiting setup.

• Admin Password Min

• Admin Password Max

• System Password Min

• System Password Max

Password Bypass This option lets you bypass the system (Boot) Password and the internal HDD password

prompts during a system restart.

• Disabled

• Reboot Bypass (Default Enabled)

Password Change Allows you to determine whether changes to the system and hard disk passwords are

permitted when an administrator password is set.

• Allow Non-Admin Password Changes (Default)

Non-Admin Setup Changes This option lets you determine whether changes to the setup options are permitted when an

administrator password is set.

• Allow Wireless Switch Changes (Default)

TPM Security This option lets you control whether the Trusted Platform Module (TPM) in the system is

enabled and visible to the operating system.

TPM Security (Default)

• TPM ACPI Support

• Deactivate

• Activate

NOTE: Activation, deactivation, and clear options are not affected if you load the

setup program's default values. Changes to this option take effect immediately.

Computrace (R) This field lets you activate / de-activate or disable the BIOS module interface of the optional

Computrace Service from Absolute Software.

• Deactivate (Default)

• Disable

• Activate

CPU XD Support This option enables or disables the Execute Disable mode of the Processor.

• Enable CPU XD Support (Default Enable)

OROM Keyboard Access This option determines whether you are able to enter Option ROM Configuration screen

through hotkeys, during the system boot. The options are:

• Enable. Default: Enabled

• One Time Enable

• Disable

Admin Setup Lockout Allows you to enable or disable the option to enter setup when an admin password is set.