Users Guide

Option Description

• Thorough

• Auto (Default Enable)

NOTE: Enabling the Fastboot will prevent F2 BIOS access through USB or Thin /

Travel keyboard. You can still access the BIOS Setup, by pressing the Volume Up

button after the Dell logo screen appears.

Extended BIOS POST Time Allows you to create an additional pre-boot delay. The options are:

• 0 seconds. This option is enabled by default.

• 5 seconds

• 10 seconds

Table 20. Virtualization Support

Option Description

Virtualization This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional

hardware capabilities provided by Intel Virtualization technology.

• Enable Intel Virtualization Technology (Default)

VT for Direct I/O This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional

hardware capabilities provided by Intel Virtualization Technology for Direct I/O.

• Enable VT for Direct I/O (Default)

Trusted Execution This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the

additional hardware capabilities provided by Intel Trusted Execution Technology. Default:

disabled

Table 21. Wireless

Option Description

Wireless Device Enable Allows you to enable or disable the wireless devices

• WWAN (Default Enable)

• WLAN / WiGig

Table 22. Maintenance

Option Description

Service Tag Displays the service tag of your tablet.

Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not

set by default.

BIOS Downgrade Allows you to control flashing of the system firmware to the previous versions. This option is

enabled by default.

Table 23. System Logs

Option Description

BIOS events Displays the system event log and allows you to clear the log.

• Clear Log

Thermal events Allows you to view and clear the thermal events log.