Owners Manual

Installing the battery when the cross strap is attached

- Optional

1. Insert the battery into the battery slot.

2. Slide the battery into the slot until it clicks into place and locked.

3. Slide the velcro strap into the strap holder.

4. Affix the velcro strap.

5. Follow the procedure in After working inside your computer.

Subscriber Identification Module (SIM) card

Removing uSIM

1. Follow the procedure in Before working inside your computer.

2. Remove the left battery.

3. Lift the latch [1] and pull the SIM slot cap [2].

4. Pull the SIM from the slot until it is released [3].

NOTE: Use a flat pointed scribe to ease removing the SIM.

5. Press the SIM slot cap to initial state.

6. Install the:

a. Left battery

Removing and installing components