Owners Manual

CAUTION: When the system has been on or in use, the surface of the heat sink may be hot. Ensure to lift

the heat sink cautiously when the heatsink cools.

CAUTION: DO NOT bend or damage the copper heat sink tunnel. Any damage results in malfunction and

over heating of the tablet.

Installing heatsink for SSD or PCIE

1. Align the heatsink on the system board.

NOTE: Ensure the SSD card in connected in the slot on the system board.

NOTE: Do ensure thermal pad is applied in the heatsink and the heatsink is not damaged. If the heatsink is reused,

ensure not to damage while removal.

2. Replace the screws (4) to secure the heatsink to the tablet chassis.

3. Install the:

a. Display assembly

b. Battery

4. Follow the procedure in After working inside your computer.

PCIe Solid State Drive (SSD)

Removing PCIe Solid State Drive - SSD

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a. Battery

b. Display assembly

c. Heat sink

Removing and installing components