Owners Manual

s. Remove the adhesive tape protecting the docking board cable connector [1].
t. Lift the latch, and slide to remove the docking board cable on the system board [2].
u. Push with a plastic scribe to release the DC-in cable [3], and remove the screw (1) that secures the power connector
assembly cable [4].
v. Disconnect the battery 1 cable from the connector [5].
NOTE: Push on the connector pin head evenly to securely remove the battery cable.
w. Disconnect the battery 2 cable from the connector [6].
x. Lift the latch with a plastic scribe, and remove the pogo pin docking cable [7].
y. Disconnect the speaker cable with a plastic scribe [8].
Removing and installing components
41