Owners Manual

Next steps

1. Install the display assembly.

2. Install the batteries.

3. Follow the procedure in after working inside your tablet.

Microphone

Removing the microphone

Prerequisites

1. Follow the procedure in before working inside your tablet.

2. Remove the batteries.

3. Remove the display assembly.

About this task

The figure indicates the location of the microphone and provides a visual representation of the removal procedure.

Steps

1. Open the latch and disconnect the microphone cable from the connector on the system board and remove the screw (M2x5) that

secures the integrated microphone assembly circuit board to the system board.

2. Release the microphone assembly and, lift the microphone from the tablet chassis.

NOTE:

NEVER pull the microphone by the cable. In case the circuit board is not released smoothly, push from below

the microphone circuit board by a plastic scribe.

Installing the microphone

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

Removing and installing components