Owners Manual

Table Of Contents
Steps
1. Align the pins on the battery with the connector on the tablet.
NOTE: Ensure that the metal pin of the battery is aligned in place.
2. Place the battery into the battery bay until it clicks into place.
3. Slide the battery latch to the locked state.
4. Ensure that the battery release latch is in the locked state.
Next steps
1. Follow the procedure in after working inside your tablet.
Subscriber Identification Module (SIM) card
Removing the uSIM
Prerequisites
1. Follow the procedure in before working inside your tablet.
2. Remove the batteries.
Removing and installing components
15