Owners Manual

Table Of Contents
.
System information
Table 5. System Configuration
Option Description
SATA Operation Allows you to configure the operating mode of the integrated hard drive controller.
Disabled = The SATA controllers are hidden
AHCI = SATA is configured for AHCI mode
RAID ON = SATA is configured to support RAID mode (selected by default)
Smart Reporting This field controls whether hard drive errors for integrated drives are reported during system
startup. The Enable Smart Reporting option is disabled by default.
USB Configuration Allows you to enable or disable the integrated USB controller for:
Enable USB Boot Support
Enable External USB Port
All the options are enabled by default.
Optimize USB (selected by default)
Optimize GPS
USB PowerShare
This option configures the USB PowerShare feature behavior.
Enable USB PowerShare - disabled by default
This feature is intended to allow users to power or charge external devices, such as
phones and portable music players, using the stored system battery power through the USN
PowerShare port on the notebook, while the notebook is in a sleep state.
Audio Allows you to enable or disable the integrated audio controller. The option Enable Audio is
selected by default.
Enable Microphone
Enable Internal Speaker
Both the options are selected by default.
Keyboard Illumination
This field lets you choose the operating mode of the keyboard illumination feature. The
keyboard brightness level can be set from 25% to 100%. The options are:
Disabled
Level is 25%
Level is 50%
Level is 75%
Level is 100%-enabled by default
Tablet Buttons Illumination
This controls the LED brightness for the following tablet buttons: Power, Rotation Lock, LCD
Brightness Down, LCD Brightness Up, Volume Down, Volume Up, P1, P2, and P3. The options
are:
Off
Level is 25%
Level is 50%
Level is 75%
Level is 100%-enabled by default
Keyboard Backlight Timeout on
AC
The Keyboard Backlight Timeout dims out with AC option. The main keyboard illumination
feature is not affected. Keyboard Illumination will continue to support the various illumination
levels. This field has an effect when the backlight is enabled. The options are:
5 sec
10 sec-enabled by default
15 sec
72 System setup