Dell Latitude 7400 2-i-1 Servicemanual Forordningsmodel: P110G Forordningstype: P110G001 August 2020 rev.
Bemærk, forsigtig og advarsel BEMÆRK: En NOTE angiver vigtige oplysninger, som hjælper dig med at bruge computeren bedre. FORSIGTIG: FORSIGTIG angiver enten en mulig beskadigelse af hardware eller tab af data, og oplyser dig om, hvordan du kan undgå dette problem. ADVARSEL: ADVARSEL angiver risiko for tingskade, legemsbeskadigelse eller død. © 2019 2020 Dell Inc. eller dets associerede selskaber. Alle rettigheder forbeholdes. Dell, EMC, og andre varemærker er varemærker tilhørende Dell Inc.
Indholdsfortegnelse Kapitel 1: Sådan arbejder du med computeren................................................................................... 5 Sikkerhedsinstruktioner.........................................................................................................................................................5 Sådan slukker du for computeren — Windows 10............................................................................................................
Sådan monteres blæseren............................................................................................................................................ 47 Højttalere...............................................................................................................................................................................51 Sådan fjernes højtalerne.....................................................................................................................................
1 Sådan arbejder du med computeren Emner: • • • • Sikkerhedsinstruktioner Sådan slukker du for computeren — Windows 10 Før du udfører arbejde på computerens indvendige dele Efter du har udført arbejde på computerens indvendige dele Sikkerhedsinstruktioner Forudsætninger Følg sikkerhedsinstruktionerne med henblik på din egen sikkerhed og for at beskytte computeren og arbejdsmiljøet mod mulige skader.
Trin 1. Klik eller tryk på 2. Klik eller tryk på . , og klik eller tryk derefter påShut down (Luk computeren). BEMÆRK: Sørg for, at computeren og alle tilsluttede enheder er slukket. Hvis computeren og de tilsluttede enheder ikke blev slukket automatisk, da du lukkede operativsystemet, skal du trykke på tænd/sluk-knappen i ca. 6 sekunder for at slukke dem.
2 Teknologi og komponenter Dette kapitel giver detaljerede oplysninger om teknologi og komponenter, der er tilgængelige i systemet. Emner: • • • • USB-funktioner USB type-C HDMI 1.4a Corning Gorillaglas USB-funktioner Universal Serial Bus eller USB blev introduceret i 1996. Det forenklede markant forbindelsen mellem værtscomputere og eksterne enheder såsom muse, tastaturer, eksterne drivere og printere. Tabel 1. USB-udvikling Type Dataoverførselshastighed Kategori Introduktionsår USB 2.
● USB 2.0 havde tidligere fire ledninger (strøm, jord og et par til differential-data). USB 3.0/USB 3.1 Gen 1 tilføjer fire mere, til to par til differential-signaler (modtage og sende), dermed sammenlagt otte tilslutninger i stikkene og kabelføringen. ● USB 3.0/USB 3.1 Gen 1 anvender en bidirektionel grænseflade, i modsætning til USB 2.0's halv-duplex. Dette giver en 10-dobling af den teoretiske båndbredde.
USB type-C USB type-C er et nyt og meget lille fysisk stik. Stikket selv kan understøtte forskellige spændende nye USB-standarder som USB 3.1 og forsyning af USB-strøm (USB PD). Alternativ tilstand USB Type-C er en ny stikstandard, der er meget lille. Det drejer sig om en tredjedel af størrelsen på et gammelt USB Type-A stik. Dette er en enkeltstikstandard, som alle enheder bør kunne anvende.
Thunderbolt 3 over USB Type-C Thunderbolt 3 bringer Thunderbolt til USB Type-C med hastigheder på op til 40 Gbps, hvilket skaber en kompakt port. der gør det hele: leverer den hurtigste og mest alsidige forbindelse til enhver dock, skærm eller dataenhed som en ekstern harddisk. Thunderbolt 3 bruger et USB Type-C-stik/port for at oprette forbindelse til understøttede eksterne enheder. 1. 2. 3. 4.
● Automotive Connection System (Biltilslutningssystem) – Nye kabler og stik til bilvideosystemer, der er designet til at opfylde de unikke krav til bilmiljøet, mens det leverer den rigtige HD-kvalitet. Fordele ved HDMI ● Kvalitet – HDMI overfører ukomprimeret digital audio og video med den allerfineste krystalklare billedkvalitet. ● Prisbillig HDMI giver kvalitet og funktionalitet i et digitalt interface, mens det også understøtter ukomprimerede videoformater på en enkel og omkostningseffektiv måde.
Egenskaber Tabel 3. Egenskaber Tæthed 2,43 g/cm Youngs modul 76,7 GPa Poissons forhold 0,21 Forskydningsmodul 31,7 GPa Vickers-hårdhed (200 g belastning) 489 kgf/mm2 ● Ikke styrket ● Styrket 596 kgf/mm2 596 kgf/mm2 Bruds sejhed 0,69 MPa m0.5 Koefficient af ekspansion (0 ˚C - 300 ˚C) 78,8 x 10-7 /°C Kemisk styrkelse Kapacitet >850 MPa CS, ved 50 µm Depth Of Layer (DOL) Specifikationerne kan ændres uden varsel Optisk Tabel 4.
Elektrisk Tabel 6. Elektrisk Frekvens (MHz) Dielektrisk konstant Loss Tangent 54 7,08 0,009 163 7,01 0,010 272 7,01 0,011 272 7,00 0,010 490 7,99 0,010 599 7,97 0,011 912 7,01 0,012 1499 6,99 0,012 1977 6,97 0,014 2466 6,96 0,014 2986 6,96 0,014 Afsluttet koaksial linje som ligner den opridset i NIST Technical Notes 1520 og 1355-R Afprøvning af Corning Gorilla Glass 5. ● Større skademodstand (op til 1,8X) med dyb slitage.
3 Større komponenter i dit system 1. Bunddæksel 2.
3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. FPC-kabel til berøringsskærm Kølelegeme Blæser Systemkort Batteri Højttalere Håndfladestøttemodul Møntcelle WLAN-kort WWAN-kort WWAN-afskærmning Solid state-drev SSD-afskærmning BEMÆRK: Dell leverer en komponentliste med de tilsvarende komponentnumre for den købte originale systemkonfiguration. Disse dele er tilgængelige i henhold til den garantidækning, som kunden har købt. Kontakt din Dell-salgsrepræsentant angående købstilbud.
4 Sådan fjernes og installeres komponenter Emner: • • • • • • • • • • • • • • • • • • Anbefalet værktøj Liste over skruer SD-hukommelseskort SIM-kortbakke Bunddæksel Batterikabel Møntcelle Solid state-drev WLAN-kort WWAN-kort Blæser Højttalere Kølelegeme Skærmmodul Batteri Systemkort Tastatur Håndfladestøttemodul Anbefalet værktøj Procedurerne i dette dokument kræver følgende værktøj: ● ● ● ● Phillips nr. 0 skruetrækker Phillips nr. 1 skruetrækker Plastiksyl T-30 torx-skruetrækker BEMÆRK: Nr.
Tabel 7. Liste over skruestørrelser (fortsat) Komponent Skruetype Antal WWAN-kort M2x2 1 Blæser M2x2 1 Højttalere M1,6x1,4 3 Kølelegeme M1,6x2,5 4 Skærmmodul M2,5x3,5 6 Batteri ● M1,6x4,5 ● M2x3 ● 1 ● 4 Billede ● ● Systemkort ● M2x2 ● M2x4 ● M2x3 ● 2 ● 2 ● 5 ● ● ● Tastatur M1,6x1,5 ● 1 ● 2 ● 40 SD-hukommelseskort Sådan fjernes SD-hukommelseskortet Trin 1. Tryk på SD-hukommelseskortet for at skyde det ud af SD-hukommelseskortets slot [1]. 2.
Sådan monteres SD-hukommelseskortet Trin Monter SD-hukommelseskortet i dets åbning [1], indtil det klikker på plads [2].
SIM-kortbakke Sådan fjernes SIM-kortbakken BEMÆRK: Denne fremgangsmåde gælder kun for modeller, der udelukkende leveres med WWAN-kort. Trin 1. Sæt en papirklips eller et redskab til SIM-kortfjernelse ind i lille hul på SIM-kortbakken [1]. 2. Tryk på stiften for at løsne låsen og skyde SIM-kortbakken ud [2]. 3. Træk SIM-kortbakken ud af computeren [3].
Sådan monteres SIM-kortbakken Trin Monter SIM-kortbakken i dens åbning på computeren [1], og skub låsen på plads [2].
Bunddæksel Sådan fjernes bunddækslet Forudsætninger 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern SD-hukommelseskortet. Trin 1. Løsn de 10 fastmonterede skruer, der fastgør bunddækslet til computeren.
2. Brug en plastiksyl [1] til at lirke bunddækslet af langs fordybningerne bag hængelsindhakkene som vist på billedet. 3. Lirk bunddækslet af langs kanterne fra oversiden [2] for at skille bunddækslet fra computeren [2]. FORSIGTIG: Træk ikke i bunddækslet fra oversiden lige efter, at det er blevet lirket op fra fordybningerne, da det kan skade bunddækslet.
4. Lirk langs bundens venstre, højre og nederste kant.
5. Skub først bunddækslet udad, og løft det så af computeren.
Sådan installeres bunddækslet Trin 1. Skub bunddækslet ind, og læg det på plads på computeren.
2. Tryk langs bunddækslets kanter, indtil det klikker på plads.
3. Spænd de 10 fastmonterede skruer, der holder bunddækslet fast til computeren.
4. Tryk på de to markerede områder på systemet som vist på billedet, efter skruerne er fastgjort, for at afslutte monteringen.
Næste trin 1. Montér SD-hukommelseskortet. 2. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele Batterikabel Sådan frakobles batterikablet Forudsætninger 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern SD-hukommelseskortet. 3. Fjern bunddækslet. Trin Frakobl batterikablet fra stikket på systemkortet.
Sådan tilsluttes batterikablet Trin Sæt batterikablet i stikket på systemkortet.
Næste trin 1. 2. 3. 4. Monter bunddækslet. Monter SIM-kortet. Montér SD-hukommelseskortet. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele Møntcelle Fjernelse af møntcellebatteriet Forudsætninger 1. 2. 3. 4. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. Fjern SD-hukommelseskortet. Fjern bunddækslet. Frakobl batterikablet. Trin 1. Tilslut møntcellebatteriets kabel til stikket på systemkortet [1]. 2.
Sådan installeres møntcellebatteriet Trin 1. Fastgør møntcellebatteriet til systemet [1]. 2. Tilslut møntcellebatteriets kabel til stikket på systemkortet [2].
Næste trin 1. 2. 3. 4. Tilslut batterikablet Monter bunddækslet. Montér SD-hukommelseskortet. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele Solid state-drev Sådan fjernes solid-state-drevet. Forudsætninger 1. 2. 3. 4. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. Fjern SD-hukommelseskortet. Fjern bunddækslet. Frakobl batterikablet. Trin 1. Træk metalfoliet [1] og den sorte tape [2] af, der delvist dækker solid-state-drevets afdækning.
2. Fjern den enkelte (M2x2) skrue [1], der fastgør SSD-afdækningen til systemkortet. 3. Løft for at fjerne SSD-afdækningen fra systemkortet [2].
4. Skub og fjern SSD-modulet fra stikket på systemkortet. Sådan installeres solid-state-drevet Trin 1. Få solid-state-drevets (SSD) modul til at flugte med, og sæt det i stikket på systemkortet.
2. Placer SSD-afdækningen på SSD-modulet [1], og genmonter den enkelte (M2x2) skrue [2] for at fastgøre det til systemkortet. 3. Sæt den sorte tape [1] og metalfoliet [2] på for at fastgøre SSD-afdækningen.
Næste trin 1. 2. 3. 4. Tilslut batterikablet Monter bunddækslet. Montér SD-hukommelseskortet. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele WLAN-kort Sådan fjernes WLAN-kortet Forudsætninger 1. 2. 3. 4. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. Fjern SD-hukommelseskortet. Fjern bunddækslet. Frakobl batterikablet. Trin 1. Træk Mylar-stykket delvist af, der dækker WLAN-kortet [1]. 2.
Sådan installeres WLAN-kortet Trin 1. Skub WLAN-kortet [1] i en vinkel ind i WLAN-kortets stik på systemkortet. 2. Tilslut WLAN-antennekortkablerne [2] til stikket på WLAN-kortet. 3. Få skruehullet på WLAN-kortets bøjle til at flugte med skruehullet på WLAN-kortet [3]. 4. Genmonter den enkelte (M2x2) skrue [4] for at fastgøre WLAN-kortet til systemkortet. 5. Sæt Mylar-stykket fast på systemkortet for at dække WLAN-kortet [5].
Næste trin 1. 2. 3. 4. Tilslut batterikablet Monter bunddækslet. Montér SD-hukommelseskortet. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele WWAN-kort Sådan fjernes WWAN-kortet Forudsætninger 1. 2. 3. 4. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. Fjern SD-hukommelseskortet. Fjern bunddækslet. Frakobl batterikablet. Trin 1. Fjern metalafdækningen fra WWAN-kortet.
2. Fjern den enkelte (M2x2) skrue [1], der fastgør WWAN-bøjlen til WWAN-kortet. 3. Fjern WWAN-bøjlen [2] fra WWAN-kortet. 4. Frakobl trådløs-antennekablerne [3] fra stikkene på WWAN-kortet. 5. Skub og fjern WWAN-kortet [4] fra stikket på systemkortet.
Sådan installeres WWAN-kortet Trin 1. Skub WWAN-kortet [1] i en vinkel ind i WWAN-kortets stik på systemkortet. 2. Tilslut WWAN-antennekablerne [2] til stikket på WWAN-kortet. 3. Få skruehullet på WWAN-kortets bøjle til at flugte med skruehullet på WWAN-kortet [3]. 4. Genmonter den enkelte (M2x2) skrue [4] for at fastgøre WWAN-kortet til systemkortet.
5. Placer metalafdækningen på WWAN-kortet.
Næste trin 1. 2. 3. 4. Tilslut batterikablet Monter bunddækslet. Montér SD-hukommelseskortet. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele Blæser Sådan fjernes blæseren Forudsætninger 1. 2. 3. 4. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. Fjern SD-hukommelseskortet. Fjern bunddækslet. Frakobl batterikablet.
2. Frakobl blæserkablet [1] fra stikket på systemkortet [1]. 3. Træk metalfoliet [2] og den sorte tape [3] delvist af på SSD-afdækningen.
4. Fjern den enkelte (M2x2) skrue [1], der fastgør WWAN P-sensorbøjlen til systemkortet. 5. Fjern WWAN P-sensorbøjlen [2] fra systemkortet. 6. Træk den polstrede tætning [1] delvist af blæserkabinettet. 7. Fjern den enkelte (M2x2) skrue [2], der fastgør blæseren til systemkortet.
8. FORSIGTIG: Der er puder, som delvist sidder i vejen for håndfladestøtten, på undersiden af blæseren. Teknikere bør ikke løfte blæseren direkte op, da det kan skade blæseren. Løft den venstre side af blæseren delvist op, og skub den mod venstre for at fjerne den fra computeren.
Sådan monteres blæseren Om denne opgave For Latitude 7400 2-i-1-modeller, der leveres med et WWAN-kort, er der en L-formet bøjle (P-sensorbøjle), der dækker de fire WWAN LTE-antennekabelforbindelser til systemkortet. Skruen, der fastgør bøjlen til systemet, er også med til at fastgøre blæseren til systemet. Teknikeren skal fjerne bøjlen, før blæseren fjernes, og derefter genmontere bøjlen, når blæseren er genmonteret. Trin 1. Skub blæseren i en vinkel ind i dens slot på systemkortet.
2. Genmonter den enkelte (M2x2) skrue [1] for at fastgøre blæseren til systemkortet. 3. Sæt den polstrede tætning [2] fast på blæserkabinettet.
4. Få skruehullerne på WWAN P-sensorbøjlen [1] til at flugte med skruehullerne på blæseren. 5. Genmonter den enkelte (M2x2) skrue [2], der fastgør WWAN P-sensorbøjlen til blæseren. 6. Sæt blæserkablet [1] i stikket på systemkortet. 7. Sæt den sorte tape [2] og metalfoliet [3] på, der delvist dækker SSD-afdækningen.
8. Sæt Mylar-stykket fast på systemkortet.
Næste trin 1. 2. 3. 4. Tilslut batterikablet Monter bunddækslet. Montér SD-hukommelseskortet. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele Højttalere Sådan fjernes højtalerne Forudsætninger 1. 2. 3. 4. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. Fjern SD-hukommelseskortet. Fjern bunddækslet. Frakobl batterikablet. Trin 1. Frakobl højttalerkablet [1] fra stikket på systemkortet, og træk højtalerens flex-kabel [2] af batteriet. 2.
Sådan installeres højttalerne Trin 1. Få skruehullerne på højtalerne [1] til at flugte med skruehullerne på chassiset. 2. Genmonter de tre (M1,6x1,4) skruer [2], der holder bunddækslet fast på chassiset.
3. Tilslut højttalerkablet [1] til stikket på systemkortet, og sæt højtalerens flex-kabel [2] fast på batteriet.
Næste trin 1. 2. 3. 4. Tilslut batterikablet Monter bunddækslet. Montér SD-hukommelseskortet. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele Kølelegeme Sådan fjernes kølelegemet Forudsætninger 1. 2. 3. 4. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. Fjern SD-hukommelseskortet. Fjern bunddækslet. Frakobl batterikablet. Trin 1. Træk Mylar-stykket delvist af [1] systemkortet. 2.
4. Fjern metalfoliet fra kølelegemets afdækning.
5. Fjern kølelegemets afdækning fra systemkortet.
6. Fjern de fire (M1,6x2,5) skruer [1], der fastgør kølelegemet til systemkortet. 7. Løft kølelegemet [2] væk fra systemkortet.
Sådan installeres kølelegemet Trin 1. Få skruehullerne i kølelegemet [1] til at flugte med skruehullerne i systemkortet. 2. Genmonter de fire (M1,6x2,5) skruer [2], der fastgør kølelegemet til systemkortet.
3. Placer kølelegemets afdækning på kølelegemet.
4. Sæt metalfolierne fast på kølelegemets afdækning.
5. Sæt FPC-kablet til kameraet og touchskærmen fast på kølelegemets afdækning [1]. 6. Sæt FPC-kablet til kameraet og touchskærmen [2] i stikket på systemkortet. 7. Sæt Mylar-stykket [3] fast på systemkortet.
Næste trin 1. 2. 3. 4. Tilslut batterikablet Monter bunddækslet. Montér SD-hukommelseskortet. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele Skærmmodul Sådan fjernes skærmmodulet Forudsætninger 1. 2. 3. 4. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. Fjern SD-hukommelseskortet. Fjern bunddækslet. Frakobl batterikablet. Trin 1. Træk Mylar-stykket delvist af [1] systemkortet. 2.
4. Træk tapen af skærmkablet [1]. 5. Lirk fastholdelsesklemmerne op på begge sider, og drej låsen op til åben position [2]. FORSIGTIG: Stikket til skærmkablet har en lås, der låser det fast til systemkortet, som teknikere må dreje åben for at frakoble skærmkablet fra systemkortet. Efter at have drejet låse åben, skal teknikere tage fat i venstre og højre side af kablets stikhoved, og frakobl skærmkablet fra systemkortet med en direkte opadrettet bevægelse for at undgå skade til stikkets ben. 6.
7. Fjern de seks (M2,5x3,5) skruer [1], der fastgør skærmhængslerne til computeren. 8. Løft skærmmodulet væk fra computeren [2].
BEMÆRK: Skærmmodulet til Latitude 7400 2-i-1 er et Hinge-Up-Display (HUD) og kan ikke skilles yderligere ad, efter det tages ud af bundrammen. Hvis komponenter af HUD-modulet ikke fungerer og skal udskiftes, skal hele skærmmodulet udskiftes. Sådan installeres skærmmodulet Trin 1. Monter skærmmodulet med hængslerne 180º åbne, så det flugter med computeren [1]. 2. Genmonter de seks (M2,5x3,5) skruer [1], der fastgør skærmhængslerne til computeren [2]. 3. Tilslut skærmkablet [1] til stikket på systemkortet.
5. Før FPC-kablet til kameraet og touchskærmen, og sæt det fast på kølelegemets afdækning [1]. 6. Sæt FPC-kablet til kameraet og touchskærmen i stikket på systemkortet [2], og sæt Mylar-styket fast på systemkortet [3].
Næste trin 1. 2. 3. 4. Tilslut batterikablet Monter bunddækslet. Montér SD-hukommelseskortet. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele Batteri Forholdsregler for litium-ion-batteri FORSIGTIG: ● Vær forsigtig, når du håndterer lithium-ion-batterier. ● Aflad batteriet så meget som muligt, inden du fjerner det fra systemet. Dette kan gøres ved at koble vekselstrømsadapteren fra systemet for derved at få opbrugt batteriet.
2. Fjern den enkelte (M1,6x4,5) skrue [1] i den røde cirkel og de fire (M2x3) skruer, der er fremhævet med gult, som fastgør batteriet til chassiset. 3. Løft og fjern batteriet fra computeren [2].
Figur 3. batteri med 4 celler BEMÆRK: Et 6-cellet batteri har en ekstra M2x4 skrue, der er vist med grøn farve. Fjern skruen, før du fjerner batteriet fra computeren. Tabel 8.
Figur 4. 6-cellet batteri Sådan installeres batteriet Trin 1. Få batteriets skruehuller til at flugte med håndfladestøttemodulets skruehuller [1]. 2. Genmonter de fire (M2x3) skruer og den enkelte (M1,6x4,5) skrue, der fastgør batteriet til håndfladestøttemodulet [2].
BEMÆRK: Monter den ekstra M2x4 skrue til 6-cellet batteri. Skruen vises med grøn farve i batteriets demonteringsafsnit. 3. Sæt tapen på det trådløs-antennekablet, der fastgør det til batteriet [1]. 4. Træk antennekablerne langs kabelkanalerne og støttebøjlen på batteriet [2]. 5. Tilslut batterikablet til systemkortet.
Næste trin 1. 2. 3. 4. Tilslut batterikablet Monter bunddækslet. Montér SD-hukommelseskortet. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele Systemkort Sådan fjernes systemkortet Forudsætninger 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 72 Følg proceduren i Før du udfører arbejde på computerens indvendige dele. Fjern SD-hukommelseskortet. Fjern bunddækslet. Frakobl batterikablet. Fjern møntcellen. Fjern SSD'et. Fjern WLAN-kort. Fjern WWAN-kortet. Fjern blæseren.
Trin 1. Frakobl møntcellekablet fra systemkortet [1], og fjern møntcellen fra systemkortet [2]. Når alle bøjler er fjernet og alle kabler frakoblet, er der fem skruer, der fastgør systemkortet til håndfladestøtten. En af skruerne er dækket af batteriet til realtidsuret (RTC). Teknikeren skal tage RTC-batteriet af systemkortet for at få adgang til alle skruerne til systemkortet. 2. Træk tapen af skærmkabelstikket på systemkortet [3]. 3.
8. Fjern den enkelte (M2x2) skrue [1], der fastgør strøm-fingertryksbøjlen til systemkortet. 9. Fjern strøm-fingertryksbøjlen [2], og frakobl kablet fra systemkortet [3]. 10. Frakobl LTE P-sensoren og antennens adskillerkabler [4] fra systemkortet. 11. Frakobl LTE MAIN and AUX-antennens kabler [5] fra systemkortet. Før en plastiksyl ind i spalten i stikkets nederste venstre hjørne, og lirk forsigtigt kabelstikket op af systemkortet.
12. Fjern den enkelte (M2x2) skrue [1], og fjern SSD-bøjlen fra systemkortet [2]. 13. Fjern de to (M2x4) skruer [3], og fjern USB Type-C-bøjlen fra systemkortet [4].
14. FORSIGTIG: For modeller, der leveres uden understøttelse af LTE, skal den ikke-fungerende SIM-kortbakken først fjernes fra systemet før systemkortet fjernes. Fjern de fem (M2x3) skruer [1], og fjern systemkortet fra copmuteren [2]. BEMÆRK: Hvis systemkortet løftes fra den tynde midterste del, kan det beskadige kortet.
Sådan installeres systemkortet Trin 1. Monter systemkortet i computeren [1], og sæt de fem (M2x3) skruer i, der fastgør det til computeren. BEMÆRK: Når alle bøjler er fjernet og alle kabler frakoblet, er der fem skruer, der fastgør systemkortet til håndfladestøtten. En af skruerne er dækket af batteriet til realtidsuret (RTC). Teknikeren skal tage RTC-batteriet af systemkortet for at få adgang til alle skruerne til systemkortet.
2. Monter USB Type-C-bøjlen [1] på systemkortet, og fastgør den med to (M2x4) skruer [2] på systemkortet. 3. Monter SSD-bøjlen [3], og fastgør den med en enkelt (M2x2) skrue [4] til systemkortet.
4. Tilslut tænd/sluk-knappens/fingeraftrykslæserens kabel til systemkortet [1]. 5. Monter tænd/sluk-knappens/fingeraftrykslæserens bøjlen [2] på systemkortet, og fastgør den med den enkelte (M2x2) skrue [3]. 6. Tilslut LTE P-sensoren og antennens adskillerkabler [4] til systemkortet. 7. Tilslut LTE MAIN and AUX-antennens kabler [5] til systemkortet.
8. Tilslut følgende tænd/sluk-knapkabel fra systemkortet [1]. 9. Tilslut USH-kortets kabel [2] og tastaturet sammen med baggrundslysets kabel [3] til systemkortet. 10. Tilslut pegefeltkablet [4] og LED-kortkablet [5] til systemkortet.
11. Monter møntcellen [1] på systemkortet, og forbind dens kabler til systemkortet [2]. 12. Forbind skærmkablet til systemkortet [3], og drej aktuatoren, så den lukker [4]. 13. Fastgør skærmkabelstikket ved at sætte tapen på systemkortet [5].
Næste trin 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Monter batteriet. Installer kølelegemet Installer højttaleren. Installer blæseren. Installer WWAN-kortet. Monter WLAN-kortet. Installer SSD'et. Installer møntcellen Tilslut batterikablet Monter bunddækslet. Installer SIM-kortet Montér SD-hukommelseskortet. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. Tastatur Fjernelse af tastaturet Forudsætninger 1.
4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Frakobl batterikablet. Fjern møntcellen. Fjern SSD'et. Fjern WLAN-kort. Fjern WWAN-kortet. Fjern blæseren. Fjern højtalerne. Fjern batteriet. Fjern kølelegemet. Fjern systemkortet. Trin 1. Træk USH-kortets kabel [1], pegefeltkablet [2] og LED-kortets kabel [3] af tastaturets bund. 2. Træk LTE-antennemodulets to stykker kobberfolie [1, 3] tilbage, og LTE AUX-kablet af tastaturet [2]. 3. Frakobl chipkortlæserens FPC fra USH-kortet [4], og træk FPC-kablet af tastaturet [5].
4. Fjern de to (M1,6x1,5) skruer [1] for at fjerne den midterste batteribøjle [2] fra håndfladestøtten. 5. Træk FPC-kablerne til tastaturet og tastaturets baggrundslys af tastaturet [3]. 6. Fjern den enkelte (M1,6x1,5) skrue [4] for at fjerne den venstre batteribøjle [5] fra computeren.
7. Fjern de 40 skruer (M1,6x1,5) skruer, der fastgør tastaturet til håndfladestøttemodulet. Flere af skruerne er dækket af det fleksible flade kabel (FFC) til pegefeltet, det fleksible flade kabel til LED'en, det fleksible printkort (FPC) til tastaturet samt kobberfolie. Teknikeren skal fjerne FFC'er/FPC'en/folien for at få adgang til tastaturets skruer.
8. Løft tastaturet væk fra håndfladestøttemodulet.
Sådan installeres tastaturet Trin 1. Placer tastaturet på håndfladestøttemodulet.
2. Genmonter de 40 (M1,6x1,5) skruer på tastaturet for at fastgøre det til håndfladestøttemodulet. Flere af skruerne er dækket af det fleksible flade kabel (FFC) til pegefeltet, det fleksible flade kabel til LED'en, det fleksible printkort (FPC) til tastaturet samt kobberfolie. Teknikeren skal fjerne FFC'er/FPC'en/folien for at få adgang til tastaturets skruer.
3. Monter den midterste batteribøjle [1], og fastgør den med to (M1,6x1,5) skruer [2]. 4. Sæt FPC-kablerne til tastaturet og tastaturets baggrundslys fast på tastaturet [3]. 5. Monter den venstre batteribøjle [4], og fastgør den meden enkelt (M1,6x1,5) skrue [5].
6. Sæt LTE-antennemodulets to stykker kobberfolie [1, 3] og LTE AUX-kablet fast på tastaturet [2]. 7. Før chipkortkablet [4], sæt det fast på tastaturet, og forbind det med USH-kortet [5].
8. Sæt USH-kortets kabel [1], pegefeltkablet [2] og LED-kortets kabel [3] fast på tastaturets bund. Næste trin 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Installer systemkortet Monter batteriet. Installer kølelegemet Installer højttaleren. Installer blæseren. Installer WWAN-kortet. Monter WLAN-kortet. Installer SSD'et. Installer møntcellen Tilslut batterikablet Monter bunddækslet. Installer SIM-kortet Montér SD-hukommelseskortet.
7. 8. 9. 10. 11. 12. 13. 14. 15. Fjern WLAN-kort. Fjern WWAN-kortet. Fjern blæseren. Fjern højtalerne. Fjern kølelegemet. Fjern skærmmodulet. Fjern batteriet. Fjern systemkortet. Fjern tastaturet. Trin 1. Efter udførelse af alle ovennævnte trin er der kun håndfladestøttemodulet tilbage. 2. Overfør komponenter, der er en efterfølgende forudsætning, til det nye håndfladestøttemodul. Næste trin Oplysninger om tænd/sluk-knappen med FPC 1. 2. 3. 4. 5. 6. 7. 8. 9.
4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Installer skærmmodulet Installer kølelegemet Installer højttaleren. Installer blæseren. Installer WWAN-kortet. Monter WLAN-kortet. Installer SSD'et. Installer møntcellen Tilslut batterikablet Monter bunddækslet. Installer SIM-kortet Montér SD-hukommelseskortet. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele.
5 Fejlfinding Emner: • • • • • • • Forbedret Pre-Boot System Assessment – ePSA-diagnosticering Systemdiagnosticeringsindikatorer Inddækning BIOS (USB-nøgle) Sådan opdateres BIOS'en Backup-medie og genopretningsmuligheder Wi-Fi-strømcyklus Frigørelse af overskudsstrøm Forbedret Pre-Boot System Assessment – ePSAdiagnosticering Om denne opgave ePSA-diagnostik (også kendt som systemdiagnostik) udfører et fulstændigt tjek af din hardware. ePSA er indlejret med BIOS og er lanceret af BIOS internt.
Systemdiagnosticeringsindikatorer indikator for batteristatus Viser status for strøm og -batteriopladning. Konstant hvid — Strømadapteren er tilsluttet, og batteriet er mere end 5 procent opladet. Ravgul — Computeren kører på batteri, og batteriet er mindre end 5 procent opladet. Off (Fra) ● Strømadapteren er tilsluttet og batteriet er helt opladet. ● Computeren kører på batteri, og batteriet er mere end 5 procent opladet. ● Computeren er i slumre- eller dvaletilstand eller slukket.
Inddækning BIOS (USB-nøgle) Trin 1. Følg proceduren fra trin 1 til trin 7 i "Flashing af BIOS" for at downloade den nyeste fil til BIOS-opsætningsprogrammet. 2. Opret et USB-drev, der kan bootstartes. For yderligere oplysninger, se artiklen SLN143196 i vidensbasen på www.dell.com/support. 3. Kopiér filen til BIOS-opsætningsprogrammet til USB-drevet, der kan bootstartes. 4. Slut USB-drevet, der kan bootstartes, til den computer, der skal have BIOS-opdateringen. 5.
3. Sluk for den trådløse router. 4. Vent i 30 sekunder. 5. Tænd den trådløse router. 6. Tænd for modemmet. 7. Tænd computeren. Frigørelse af overskudsstrøm Om denne opgave Overskudsstrøm er den ophobede, statiske elektricitet, der er tilbage i computeren, også efter computeren er blevet slukket, og selvom batteriet er fjernet. Følg følgende procedure for få frigjort overskudsstrømmen: Trin 1. Sluk for computeren. 2. Frakobl strømadapteren fra computeren. 3.
6 Sådan får du hjælp Emner: • Kontakt Dell Kontakt Dell Forudsætninger BEMÆRK: Hvis du ikke har en aktiv internetforbindelse, kan du finde kontaktoplysninger på købskvitteringen, pakkeslippen, fakturaen eller i Dells produktkatalog. Om denne opgave Dell giver flere muligheder for online- og telefonbaseret support og service. Tilgængeligheden varierer for de enkelte lande og produkter, og nogle tjenester findes muligvis ikke i dit område.