Owners Manual

12. Remove the touchpad buttons.

13. Remove the system board.

14. Remove the coin cell.

15. Remove the power button.

16. Remove the keyboard.

1. After removing these components, you are left with the palmrest assembly.

2. Install the following components to the new palmrest assembly:

1. Install the keyboard.

2. Install the power button.

3. Install the coin cell.

4. Install the system board.

5. Install the display assembly

6. Install the speaker.

7. Install the LED board.

8. Install the power adapter port.

9. Install the heatsink-fan assembly.

10. Install the WLAN card.

11. Install the SSD.

12. Install the memory.

13. Install the battery.

14. Install the base cover.

15. Follow the procedure after working inside your computer.

Removing and installing components