Owners Manual

A billentyűzet beszerelése
1.
MEGJEGYZÉS
The keyboard has multiple snap points on the lattice side which must be pushed down firmly at the
snap points in order to secure and fit it to the replacement keyboard.
Align the keyboard to the keyboard support plate [1] and replace the two (M2x2) screws [2].
2. Place the keyboard assembly in the palmrest [1] and secure it with the 17 (M1.6x2) screws [2].
MEGJEGYZÉS
This image shows disassembly of a carbon fiber variant, an Aluminum variant of this model has 21
M1.6x2 screws securing the keyboard assembly to palmrest. assembly.
3. Connect the keyboard cable [3] and the backlight cable [4] to the touchpad module.
82
Alkatrészek eltávolítása és beszerelése