Owners Manual

Table Of Contents
3. Connect the keyboard cable [3] and the backlight cable [4] to the touchpad module.
1. Install the power button.
2. Install the coin cell.
3. Install the system board.
4. Install the display assembly
5. Install the power adapter port.
6. Install the heatsink-fan assembly.
7. Install the WLAN card.
8. Install the SSD.
9. Install the memory.
10. Install the battery.
11. Install the base cover.
12. Follow the procedure after working inside your computer.
Palmrest
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the memory.
5. Remove the SSD.
6. Remove the WLAN card.
7. Remove the heatsink-fan assembly.
8. Remove the power adapter port.
9. Remove the LED daughterboard.
88
Removing and installing components