Latitude 7490 Vlasnički priručnik Regulativni model: P73G Regulativna vrsta: P73G002 October 2020 Rev.
Napomene, oprezi i upozorenja NAPOMENA: NAPOMENA ukazuje na važne informacije koje vam pomažu da koristite svoj proizvod na bolji način. OPREZ: OPREZ naznačuje moguće oštećenje hardvera ili gubitak podataka i objašnjava kako izbjeći neki problem. UPOZORENJE: UPOZORENJE naznačuje moguće oštećenje imovine, osobne ozljede ili smrt. © 2017.-2020. Dell Inc. ili njegove podružnice. Sva prava pridržana. Dell, EMC i drugi zaštitni znakovi vlasništvo su tvrtke Dell Inc. ili njezinih podružnica.
Sadržaj Poglavlje 1: Radovi na vašem računalu...............................................................................................6 Sigurnosne mjere opreza...................................................................................................................................................... 6 Zaštita od statičkog elektriciteta — ESD.....................................................................................................................
Uklanjanje LED ploče..................................................................................................................................................... 23 Ugradnja LED ploče....................................................................................................................................................... 24 Modul pametne kartice.................................................................................................................................................
Kombinacije prečaca tipkovnice.........................................................................................................................................63 Poglavlje 5: Program za postavljanje sustava................................................................................... 65 Izbornik za podizanje sustava............................................................................................................................................ 65 Navigacijske tipke....................
1 Radovi na vašem računalu Teme: • • • Sigurnosne mjere opreza Prije radova na unutrašnjosti računala Nakon rada na unutrašnjosti računala Sigurnosne mjere opreza U poglavlju o mjerama opreza navedeni su glavni koraci koje treba poduzeti prije bilo kakvog rastavljanja. Prije bilo kakve ugradnje ili postupka popravka kvara koji uključuje sastavljanje ili rastavljanje primijenite sljedeće sigurnosne mjere opreza: ● ● ● ● Isključite sustav i sve priključene periferne uređaje.
● Povremeni – ovi kvarovi obuhvaćaju oko 80 posto kvarova uzrokovanih statičkim elektricitetom. Visoka stopa povremenih kvarova znači da se u većini slučajeva ne prepoznaje nastalo oštećenje. DIMM prima elektrostatički udar, ali funkcija je samo oslabljena i nisu primjetni vanjski simptomi oštećenja. Za konačno otkazivanje oslabljene komponente mogu biti potrebni tjedni ili mjeseci, a u međuvremenu može doći do degradacije integriteta memorije, povremenih pogrešaka memorije itd.
Sažetak zaštite od statičkog elektriciteta Preporučujemo da svi terenski serviseri uvijek koriste uobičajeni remen za ručni zglob sa žičnim uzemljenjem i zaštitni antistatički podložak prilikom servisiranja proizvoda tvrtke Dell. Osim toga, vrlo je važno da tehničari drže osjetljive dijelove odvojeno od izolatora tijekom servisiranja i da za transport osjetljivih dijelova upotrijebe antistatičke vrećice.
2 Uklanjanje i instaliranje komponenti Teme: • • • • • • • • • • • • • • • • • • • • • • • • • Preporučeni alati Popis veličina vijaka Kartica modula za identifikaciju pretplatnika Poklopac kućišta Baterija Tvrdi pogon Zvučnik baterija na matičnoj ploči WWAN karticu WLAN kartica Memorijski moduli Sklop hladila procesora LED ploča Modul pametne kartice Gumbi podloge osjetljive na dodir Ulaz priključka napajanja Sklop zaslona Ploča dodirnog zaslona Okvir zaslona Nedodirna ploča zaslona Modul mikrofona kamere
Tablica 1.
Ponovno postavljanje SIM kartice 1. 2. 3. 4. Umetnite papirnati umetak ili alat za uklanjanje SIM kartice u otvor na ladici SIM kartice. Izvucite ladicu SIM kartice pomoću šila Postavite SIM karticu na ladicu. Umetnite ladicu SIM kartice u utor. Uklanjanje lažne ladice SIM kartice Za modele isporučene s WWAN karticom, ladica SIM kartice mora se prva ukloniti iz sustava prije uklanjanja matične ploče. Za uklanjanje ladice SIM kartice iz sustava pratite upute u odjeljku za rastavljanje.
Poklopac kućišta Uklanjanje maske kućišta 1. Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala. 2. Za otpuštanje poklopca kućišta: a. Otpustite osam pričvrsnih vijaka (M2,5 x 6,0) kojima je poklopac postolja pričvršćen za sustav [1]. NAPOMENA: Budite pažljivi prilikom otpuštanja vijaka. Postavite odvijač tako da ogovara kutu glava vijaka (donja dva) kako biste izbjegli moguće oštećivanje glava vijaka. b. Plastičnim šilom odvojite masku postolja od ruba [2]. 3.
Ugradnja maske kućišta 1. Poravnajte jezičke maske kućišta s utorima na rubovima sustava. 2. Pritisnite rubove poklopca sve dok ne klikne na mjesto. 3. Ako želite pričvrstiti masku kućišta, zategnite osam vijaka za pričvršćenje (M2,5 x 6,0). NAPOMENA: Budite pažljivi prilikom zatezanja vijaka. Postavite odvijač tako da ogovara kutu glave vijka kako biste izbjegli moguće oštećivanje glave vijka. 4. Slijedite upute u odlomku Nakon rada na unutrašnjosti računala.
● Pobrinite se da se niti jedan vijak prilikom servisiranja ovog uređaja ne izgubi ili zametne, kako biste spriječili slučajno puknuće ili oštećenje baterije i drugih komponenti sustava. ● Ako se baterija zaglavi u računalu zbog nabreknuća, nemojte je pokušavati osloboditi jer probijanje, savijanje ili drobljenje litij-ionske baterije može biti opasno. U takvom slučaju za pomoć se obratite tehničkoj podršci tvrtke Dell. Idite na www.dell.com/contactdell.
NAPOMENA: Provedite kabel baterije ako kabel pri dnu baterije nije proveden. 2. Umetnite donji rub baterije u utor na kućištu i zatim postavite bateriju. 3. Pritegnite dva vijka (M2,0 x 5,0) koji pričvršćuju bateriju na sustav. NAPOMENA: Mala baterija (3 ćelije) ima jedan vijak, veća baterija (4 ćelije) ima dva vijka. 4. Ugradite poklopac kućišta 5. Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. Tvrdi pogon Uklanjanje SSD pogona 1.
Ugradnja SSD pogona 1. Umetnite SSD pogon u priključak. 2. Nosač SSD pogona postavite iznad SSD pogona. NAPOMENA: Prilikom ugradnje nosača SSD pogona jezičak na nosaču treba biti pričvršćen s jezičcem na oslonac za dlanove. 3. Zategnite dva vijka (M2.0 x 3.0) kako biste pričvrstili SSD pogon na nosač SSD pogona, a time i na oslonac za dlanove. 4. Priključite kabel baterije na priključak na matičnoj ploči. 5. Ugradite poklopac kućišta. 6. Slijedite upute u odlomku Nakon rada na unutrašnjosti računala.
Ugradnja modula zvučnika 1. Umetnite modul sklopa hladila u njegov utor na sustavu. 2. Provucite kabel zvučnika kroz kuke za učvršćenje na ventilatoru sustava. NAPOMENA: Kod modela Latitude 7490, kabel zvučnika mora se ispravno provesti kroz kanale za usmjeravanje na osloncu za dlanove i kanale za usmjeravanje uzduž donjeg ruba gumbi podloge osjetljive na dodir. Zatim, koristeći traku koja je pričvršćena na kabel zvučnika, pričvrstite ga na gumbe podloge osjetljive na dodir 3.
NAPOMENA: Kada uklanjamo ili mijenjamo RTC bateriju ili matičnu ploču na modelu Latitude 7490, kabel RTC baterije mora se provesti kroz vodilice i pričvrstiti unutar ureza na matičnoj ploči. b. Podignite bateriju na matičnoj ploči kako biste je oslobodili od ljepljivih traka [2]. NAPOMENA: Kada uklanjamo ili mijenjamo RTC bateriju ili matičnu ploču na modelu Latitude 7290, kabel RTC baterije mora se postaviti i pričvrstiti na nosač čitača otiska prsta. Ugradnja baterije na matičnu ploču 1.
WWAN karticu Uklanjanje WWAN kartice 1. Slijedite upute u odlomku Prije rada na unutrašnjosti računala. 2. Uklonite poklopac kućišta. 3. Isključite kabel baterije iz priključka na matičnoj ploči. 4. Za uklanjanje WWAN kartice: a. Uklonite M2,0 x 3,0 vijak koji pričvršćuje nosač za WWAN na WWAN karticu [1]. b. Podignite nosač koji pričvršćuje WWAN karticu [2]. c. Odspojite WWAN kabele iz priključaka na WWAN kartici [3].
NAPOMENA: IMEI broj možete pronaći i na WWAN kartici. NAPOMENA: Kada postavljate bežične i WWAN antene, morate ih pravilno provesti u pločice za provođenje/vodilice na matičnoj ploči. Kod modela koji se isporučuju samo s bežičnom karticom, tehničari se uvijek moraju pobrinuti da se koriste zaštitne košuljice kako bi se izolirali priključci za antene prije nego što ponovno sastavite sustav. WLAN kartica Uklanjanje WLAN kartice 1. Slijedite upute u odlomku Prije rada na unutrašnjosti računala. 2.
Ugradnja WLAN kartice 1. Umetnite WLAN karticu u priključak na matičnoj ploči. 2. Priključite WLAN kabele u priključak na WLAN kartici. 3. Postavite metalni nosač i pritegnite vijak M2,0x3,0 koji ga pričvršćuje na WLAN karticu. NAPOMENA: Kada postavljate bežične i WWAN antene, morate ih pravilno provesti u pločice za provođenje/vodilice na matičnoj ploči.
Ugradnja memorijskog modula 1. Umetnite modul u priključak, a zatim pritisnite modul na kvačice dok ne sjedne na mjesto. 2. Priključite kabel baterije na priključak na matičnoj ploči. 3. Ugradite poklopac kućišta. 4. Slijedite postupak u odlomku Nakon rada na unutrašnjosti računala. Sklop hladila procesora Uklanjanje sklopa hladila Sklop hladila sastoji se od hladila i ventilatora sustava. 1. Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala. 2. Uklonite sljedeće: a. poklopac kućišta b.
Ugradnja sklopa hladila Sklop hladila sastoji se od hladila i ventilatora sustava. 1. Poravnajte sklop hladila s držačima vijka na matičnoj ploči. 2. Spojite kabel ventilatora u priključak na matičnoj ploči. 3. Vratite vijke M2,0 x 3,0 koji pričvršćuju sklop hladnjaka na matičnu ploču. NAPOMENA: Vratite vijke prema brojevima u krugovima [1, 2, 3, 4] kako je naznačeno na hladilu. 4. Ugradite sljedeće: a. baterija b. poklopac kućišta 5. Slijedite upute u odlomku Nakon rada na unutrašnjosti računala.
Ugradnja LED ploče 1. Umetnite LED ploču u utor na računalu. 2. Vratite vijak M2,0 x 2,5 kako biste pričvrstili LED ploču. 3. Spojite kabel LED ploče s LED pločom. NAPOMENA: Za Latitude 7490, kabel LED pomoćne ploče mora se provesti ispod sigurnosnog zasuna na osloncu za dlanove, a oznaka bi se trebala nalaziti ispod matične ploče 4. Ugradite sljedeće: a. baterija b. poklopac kućišta 5. Slijedite upute u odlomku Nakon rada na unutrašnjosti računala.
b. Podignite kabel pametne kartice koji je pričvršćen na modul podloge osjetljive na dodir [2]. 4. Za uklanjanje okvira za pametnu karticu: NAPOMENA: Da biste utvrdili broj vijaka, pogledajte popis vijaka a. Uklonite dva vijka (M2,0 x 3,0) koji pričvršćuju okvir pametne kartice za sustav [1]. b. Izvucite i podignite okvir pametne kartice iz sustava [2].
Ugradnja okvira pametne kartice 1. Gurnite okvir pametne kartice u utor kako biste ga poravnali s jezičcima na sustavu. 2. Ponovno postavite dva vijka (M2,0x3,0) koji pričvršćuju okvir pametne kartice na sustav. 3. Pričvrstite kabel pametne kartice i spojite ga na priključak na sustavu. 4. Ugradite sljedeće: a. PCIe SSD kartica b. baterija c. poklopac kućišta 5. Slijedite upute u odlomku Nakon rada na unutrašnjosti računala.
a. Odspojite kabel ploče s gumbima podloge osjetljive na dodir s ploče podloge osjetljive na dodir [1]. NAPOMENA: Kabel ploče s gumbima podloge osjetljive na dodir nalazi se ispod kabela pametne kartice. b. Uklonite dva vijka (M2,0x3,0) koji pričvršćuju ploču s gumbima podloge osjetljive na dodir [2]. NAPOMENA: Da biste utvrdili koji su vijci potrebni, pogledajte popis vijaka. c. Podignite ploču s gumbima podloge osjetljive na dodir sa sustava [3]. Ugradnja ploče s gumbima podloge osjetljive na dodir 1.
Ulaz priključka napajanja Uklanjanje priključka napajanja 1. Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala. 2. Uklonite sljedeće: a. poklopac kućišta b. baterija 3. Za uklanjanje priključka napajanja: a. Odspojite kabel ulaza priključka napajanja iz matične ploče [1]. NAPOMENA: Plastičnim šilom otpustite kabel iz priključka. Nemojte povlačiti kabel jer bi se mogao slomiti. b. Uklonite vijak M2,0x3,0 kako biste oslobodili metalni nosač na ulazu priključka napajanja [2]. c.
b. poklopac kućišta 6. Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. Sklop zaslona Uklanjanje sklopa zaslona 1. Slijedite upute u odlomku Prije rada na unutrašnjosti računala. 2. Uklonite: a. b. c. d. poklopac kućišta baterija WLAN kartica WWAN karticu NAPOMENA: Da biste utvrdili broj vijaka, pogledajte popis vijaka 3. Za uklanjanje sklopa zaslona: a. Odspojite kabel IR kamere s matične ploče [1]. b. Izvucite kabele WLAN i WWAN iz njihovih usmjernih kanala [2]. c.
4. Za uklanjanje sklopa zaslona: a. Otvorite zaslon računala i položite ga na ravnu površinu pod kutom od 180 stupnjeva b. Uklonite šest vijaka (M2,5 x 3,5) kojima je šarka zaslona pričvršćena na sklop zaslona [1]. c. Podignite i uklonite sklop zaslona iz sustava.
Ugradnja sklopa zaslona 1. Kućište računala postavite na čistu, ravnu površinu. 2. Ugradite sklop zaslona tako da ga poravnate s držačima vijaka šarke zaslona na sustavu. 3. Pridržavajući sklop zaslona vratite šest vijaka (M2,5 x 3,5) kako biste pričvrstili šarke zaslona na sklop zaslona sustava na jedinici sustava. 4. Provucite eDP kabel kroz usmjerni kanal. 5. Zalijepite traku koja pričvršćuje eDP kabel (kabel zaslona) na matičnu ploču. 6. Spojite eDP kabel u priključak na matičnoj ploči.
1. Slijedite upute u odlomku Prije rada na unutrašnjosti računala. 2. Uklonite: a. b. c. d. e. poklopac kućišta baterija WLAN kartica WWAN karticu sklop zaslona 3. Za uklanjanje ploče dodirnog zaslona: a. Plastičnim šilom oslobodite rubove ploče zaslona. b. c. d. e. 32 Preokrenite zaslon od vrha. Odlijepite samoljepljivu traku [1], plastični štitnik [2]. Otpustite zasun [3] i odspojite eDP kabel [4]. Odlijepite ljepljivu traku [5] i odspojite IR kabel [6].
4. Uklonite okvir zaslona iz sklopa zaslona. Ugradnja ploče dodirnog zaslona NAPOMENA: Postupak ugradnje ploče dodirnog zaslona primjenjuje se samo za konfiguracije ploče dodirnog zaslona. 1. Postavite ploču zaslona na sklop zaslona. 2. Ponovno priključite IR kabel i eDP kabel. 3. Vratite natrag samoljepljive trake i plastični štitnik. 4. Pritisnite rubove ploče zaslona sve dok ne uskoči u sklop zaslona. 5. Ugradite: a. b. c. d. e. sklop zaslona WLAN kartica WWAN karticu baterija poklopac kućišta 6.
1. Slijedite upute u odlomku Prije rada na unutrašnjosti računala. 2. Uklonite: a. b. c. d. e. poklopac kućišta baterija WLAN kartica WWAN karticu sklop zaslona 3. Za uklanjanje okvira zaslona: OPREZ: Ljepilo kojim je okvir LCD-a zalijepljen za LCD je snažno zbog čega se okvir teško skida, a ljepilo često ostaje zalijepljeno za LCD dio i može dovesti do ljuštenja slojeva ili pucanja stakla kad pokušate razdvojiti dva dijela. a. Plastičnim šilom pronađite udubinu i oslobodite donji rub okvira zaslona [1].
a. b. c. d. e. sklop zaslona WLAN kartica WWAN karticu baterija poklopac kućišta 4. Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. Nedodirna ploča zaslona Uklanjanje ploče zaslona (nedodirna) NAPOMENA: Postupak uklanjanja ploče zaslona primjenjuje se samo za konfiguracije zaslona koji nisu osjetljivi na dodir. 1. Slijedite upute u odlomku Prije rada na unutrašnjosti računala. 2. Uklonite sljedeće komponente: a. b. c. d. e. f. g.
d. Odlijepite ljepljivu traku priključka zaslona s ploče zaslona [1]. e. Odlijepite traku koja pričvršćuje kabel zaslona na stražnju stranu ploče zaslona [2]. f. Podignite metalni jezičak i odspojite kabel zaslona sa stražnje strane ploče zaslona [3,4]. g. Uklonite ploču zaslona.
Ugradnja ploče zaslona (nedodirne) NAPOMENA: Postupak ugradnje ploče zaslona primjenjuje se samo za konfiguracije zaslona koji nisu osjetljivi na dodir. 1. Priključite kabel zaslona na poleđini ploče zaslona. NAPOMENA: Za Latitude 7490, kabel LED pomoćne ploče mora se provesti ispod sigurnosnog zasuna na osloncu za dlanove, a oznaka bi se trebala nalaziti ispod matične ploče. 2. Zalijepite mylar traku koja pričvršćuje kabel zaslona na stražnju stranu ploče zaslona. 3.
4. Za uklanjanje modula kamere i mikrofona: a. Odlijepite dva dijela vodljive trake koji pokrivaju modul kamere i mikrofona [1]. NAPOMENA: Vodljiva traka je zasebni dio u odnosu na modul kamere koji se uklanja i ponovno postavljanja prilikom zamjene modula kamere i mikrofona. b. Podignite modul kamere i mikrofona [2]. c. Iz modula kamere odspojite FPC kamere [3]. d. Podignite i uklonite modul kamere i mikrofona [4].
Ugradnja kamere Postupak ugradnje primjenjuje se samo za konfiguracije isporučene s nedodirnim zaslonom. 1. Umetnite modul kamere u utor na sklopu zaslona. 2. Priključite kabel kamere. 3. Ugradite sljedeće: a. b. c. d. e. f. g. h. okvir zaslona sklop zaslona šarke zaslona uklanjanje ploče zaslona WLAN kartica WWAN karticu baterija poklopac kućišta 4. Slijedite upute u odlomku Nakon rada na unutrašnjosti računala.
Poklopci šarke zaslona Uklanjanje poklopca šarki zaslona 1. Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala. 2. Uklonite sljedeće komponente: a. b. c. d. e. poklopac kućišta baterija WLAN kartica WWAN karticu sklop zaslona 3. Gurnite poklopac šarke s lijeva na desno da biste oslobodili i uklonili poklopac šarke zaslona s ploče zaslona. Ugradnja poklopca šarki zaslona 1. Postavite kapicu šarke zaslona u utor i gurnite je natrag tako da bude pravilno postavljena na sklop zaslona.
Matična ploča Uklanjanje matične ploče 1. Slijedite upute u odlomku Prije rada na unutrašnjosti računala. NAPOMENA: Ako je vaše računalo isporučeno s WWAN karticom, tada je potrebno uklanjanje prazne ladice SIM kartice. 2. Uklonite: a. b. c. d. e. f. g. h. i. SIM kartica lažna ladica SIM kartice poklopac kućišta baterija memorijski modul PCIe SSD WLAN kartica WWAN karticu sklop hladila procesora Da biste utvrdili koji su vijci potrebni, pogledajte popis vijaka 3.
d. kabel podloge osjetljive na dodir i kabel USH ploče [4] e. ulaz priključka napajanja [5] 6. Za uklanjanje matične ploče: a. Uklonite nosač za USB vrste C. Slika ne prikazuje uklanjanje nosača za USB vrste C. b. Uklonite tri vijka (M2,0 x 5,0) kojima je pričvršćena matična ploča [1]. c. Podignite matičnu ploču dalje od računala [2].
7. Uklonite dva vijka (M2,0 x 5,0) kojima je pričvršćen nosač za USB vrste C. 8. Preokrenite matičnu ploču, odlijepite trake koje pričvršćuju nosač i uklonite USB priključak vrste C s matične ploče.
NAPOMENA: Prilikom uklanjanja ili ponovne ugradnje nosača za USB vrste C na matičnu ploču, tehničar mora postaviti matičnu ploču na podlogu za ESD kako bi se izbjeglo oštećenje. Ugradnja matične ploče 1. Poravnajte matičnu ploču s držačima vijaka na sustavu. 2. Ponovno postavite vijke M2,0x3,0 kojima je matična ploča pričvršćena na sustav. 3. Priključite zvučnik, LED ploču, bateriju u obliku kovanice, dodirnu površinu i USH kabele te priključak napajanja i kabele u priključcima na matičnoj ploči. 4.
1. Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala. 2. Uklonite: a. b. c. d. e. f. g. h. poklopac kućišta baterija memorijski modul PCIe SSD WLAN kartica WWAN karticu sklop hladila procesora matična ploča 3. Odspojite kabele s kraja oslonca za dlanove: a. kabel tipkovnice [1] b. kabel pozadinskog svjetla tipkovnice [2] , kabel USH ploče(opcionalno) c. Kabeli podloge osjetljive na dodir i USH ploče [3,4] 4.
Uklanjanje tipkovnice iz ladice tipkovnice 1. Slijedite upute u odlomku Prije rada na unutrašnjosti računala. 2. Uklonite sklop tipkovnice. 3. Uklonite pet vijaka M2,0x2,0 koji pričvršćuju tipkovnicu na sklop tipkovnice. 4. Podignite tipkovnicu dalje od ladice tipkovnice. Ugradnja tipkovnice u ladicu tipkovnice 1. Poravnajte tipkovnicu s držačima vijaka na ladici tipkovnice.
2. Pritegnite pet vijaka M2,0 x 2,0 kako biste pričvrstili tipkovnicu na ladicu tipkovnice. 3. Ugradite sklop tipkovnice. Ugradnja sklopa tipkovnice NAPOMENA: Tipkovnica i ladica tipkovnice zajedno se zovu sklop tipkovnice. NAPOMENA: Tipkovnica ima više skočnih točaka na strani rešetke koje je potrebno čvrsto pritisnuti kako bi ih učvrstili na zamjensku tipkovnicu. 1. Poravnajte sklop tipkovnice s držačima za vijke na računalu. 2. Pritegnite vijke M2,0 x 2,5 koji pričvršćuju tipkovnicu na kućište. 3.
h. i. j. k. matična ploča ulaz priključka napajanja baterija na matičnoj ploči zvučnik Preostala komponenta je oslonac za ruku. 3. Ponovno postavite oslonac za ruku. 4. Ugradite: a. b. c. d. e. f. g. h. i. j. k. zvučnik baterija na matičnoj ploči ulaz priključka napajanja matična ploča sklop hladila procesora WLAN kartica WWAN karticu PCIe SSD kartica memorijski modul baterija poklopac kućišta 5. Slijedite upute u odlomku Nakon rada na unutrašnjosti računala.
3 Tehnologija i komponente Ovo poglavlje navodi tehnologiju i komponente dostupne u sustavu. Teme: • • • • • DDR4 HDMI 1.4 USB značajke USB vrsta C Thunderbolt putem USB-a vrste C DDR4 Memorija DDR4 (Double Data Rate Fourth Generation = dvostruka brzina podataka četvrte generacije) brži je nasljednik tehnologija DDR2 i DDR3 te omogućuje kapacitet do 512 GB u usporedbi s maksimalno 128 GB po DIMM-u za DDR3.
Slika 2. Razlika u debljini Zakrivljeni rub DDR4 moduli imaju zakrivljeni rub koji pomaže pri umetanju i smanjuje naprezanje PCB-a tijekom ugradnje memorije. Slika 3. Zakrivljeni rub Memorijske pogreške Memorijske pogreške na sustavu prikazuju novu šifru kvara UKLJUČENO-TREPERENJE-TREPERENJE ili UKLJUČENO-TREPERENJEUKLJUČENO. Ako dođe do kvara cjelokupne memorije, LCD monitor se neće uključiti.
● 4K podrška – Omogućuje razlučivosti videozapisa puno veće od 1080p i podržava najnoviju generaciju zaslona koji koriste digitalni kino sustavi u mnogim komercijalnim kinima.
● Dodatna fizička sabirnica koji se dodaje paralelno s postojećom USB 2.0 sabirnicom (pogledajte na slici u nastavku). ● USB 2.0 je prethodno imao četiri žice (napajanje, uzemljenje i par za diferencijalne podataka); USB 3.0/USB 3.1 Gen 1 dodaje još dva para za diferencijalne signale (primanje i slanje) za kombinaciju od ukupno osam priključaka u priključcima i kablovima. ● USB 3.0/USB 3.1 Gen 1 koristi dvosmjerno podatkovno sučelje umjesto poludupleksa sučelja USB 2.0.
USB vrsta C USB vrste C je novi, tanki fizički priključak. Sam priključak podržava razne nove USB standarde kao što su USB 3.1 i USB napajanje (USB PD). Alternativni način rada USB vrste C predstavlja novi standard priključka koji je vrlo mali. Njegova veličina je oko jedne trećine starog USB utikača vrste A. To je standard za jedan priključak koji može koristiti svaki uređaj.
Thunderbolt 3 putem USB-a vrste C Thunderbolt 3 putem USB konektora vrste C doseže brzine do 40 Gbps, čime je dobiven jedan kompaktni, ali svestrani priključak – za najbrže i najraznovrsnije povezivanje s bilo kojom priključnom stanicom, zaslonom ili uređajem za pohranu podataka kao što je vanjski tvrdi pogon. Thunderbolt 3 s podržanim se perifernim uređajima povezuje putem USB konektora/priključka vrste C. 1. 2. 3. 4.
4 Spacifikacije sustava Teme: • • Tehničke specifikacije Kombinacije prečaca tipkovnice Tehničke specifikacije NAPOMENA: Ponude se mogu razlikovati po regijama. Sljedeće specifikacije obuhvaćaju samo ono što se prema zakonu mora isporučiti s vašim računalom. Za više informacija o konfiguraciji računala idite na Pomoć i podrška u operativnom sustavu Windows i odaberite opciju koja omogućuje pregled informacija o računalu. Tablica 3.
Tablica 3.
Tablica 3. Specifikacije (nastavak) Opcije za bateriju ● 42 Whr prizmatično, opcija ExpressCharge ● Polimerna baterija od 60 Whr, opcija ExpressCharge ● Baterija od 60 Whr dugog vijeka trajanja (polimerna) 42 WHr (3 ćelije): ● ● ● ● ● Duljina: 95,9 mm (3,78 inča) Širina: 5,70 mm (0,22 inča) Visina: 18,50 mm (0,71 inč) Visina: 185,00 g (0,41 funti) Kapacitet baterije : 3,68 mAh 60 WHr (4 ćelije): ● ● ● ● ● Dužina: 95,9mm ( 3.78 inča) Širina: 5,70mm ( 0.
Tablica 3. Specifikacije (nastavak) ● Qualcomm Snapdragon™ X7 HSPA+ (DW5811e) ● Qualcomm Snapdragon™ X7 LTE-A (DW5816e) Priključci, utori i kućište ● ● ● ● ● ● ● ● ● ● HDMI 1.4(1) Univerzalna utičnica Čitač multimedijskih kartica (SD 4.0) uSIM (vanjski) 3x USB 3.
Tablica 4. 14,0 inča (16:9) AG HD (1366 x 768) WLED 200 nita (typ) eDP 1.2, HD kamera/mikrofon, WLAN opcija, legura od magnezija straga, nedodirni (nastavak) Osvjetljenja (tipična) 200 nita Dimenzije (aktivno područje) ● Visina: 173,95 mm (maksimum) ● Širina: 309,4 mm (maksimum) ● Dijagonala: 14,0 inča Originalna rezolucija 1366 x 768 Megapikseli 1,05 Piksela po inču (PPI) 112 Omjer kontrasta (min.) 300:1 Vrijeme odgovora (maks.
Tablica 6. 14,0 inča (16:9) AG FHD (1920 x 1080) 300 nita, eDP 1.3 sa značajkom PSR, IPS, HD kamera/mikrofon, WLAN opcija, legura od magnezija straga, nedodirni (nastavak) ● Širina: 309,4 mm (maksimum) ● Dijagonala: 14,0 inča Originalna rezolucija 1920 x 1080 Megapikseli 2,07 Piksela po inču (PPI) 157 Omjer kontrasta (min.) 600:1 Vrijeme odgovora (maks.) 35 msec crno na bijelo Učestalost osvježavanja 60 Hz Kut horizontalnog pogleda (min.) +/- 80 stupnjeva Kut okomitog pogleda (min.
Tablica 8. 14,0 inča (16:9) AG FHD (1920 x 1080) 300 nita, eDP 1.3 sa značajkom PSR, IPS, samo mikrofon, WLAN opcija, legura od magnezija straga, nedodirni (nastavak) Originalna rezolucija 1920 x 1080 Megapikseli 2,07 Piksela po inču (PPI) 157 Omjer kontrasta (min.) 600:1 Vrijeme odgovora (maks.) 35 msec crno na bijelo Učestalost osvježavanja 60 Hz Kut horizontalnog pogleda (min.) +/- 80 stupnjeva Kut okomitog pogleda (min.
Tablica 10. 14,0 inča (16:9) AG FHD (1920 x 1080) 300 nita, eDP 1.3 sa značajkom PSR, IPS, Super Low Power Panel (SLP), IC kamera/mikrofon, WLAN s ASA, legura od magnezija s uskim okvirom, nedodirni (nastavak) Piksela po inču (PPI) 157 Omjer kontrasta (min.) 1000:1 Vrijeme odgovora (maks.) 35 msec crno na bijelo Učestalost osvježavanja 60 Hz Kut horizontalnog pogleda (min.) +/- 80 stupnjeva Kut okomitog pogleda (min.
Tablica 12. 14,0 inča (16:9) AG FHD (1920 x 1080) 300 nita, eDP 1.3 sa značajkom PSR, IPS, HD kamera/ mikrofon, WLAN s ASA, karbonska vlakna s uskom ivicom straga, On-cell dodirni zaslon (nastavak) Vrijeme odgovora (maks.) 35 msec crno na bijelo Učestalost osvježavanja 60 Hz Kut horizontalnog pogleda (min.) +/- 80 stupnjeva Kut okomitog pogleda (min.) +/- 80 stupnjeva Gustoća piksela 0,161 x 0,161 mm Potrošnja energije (maksimalno) 4,1 W Tablica 13.
Tablica 14.
5 Program za postavljanje sustava Program za postavljanje sustava omogućuje vam upravljanje hardverom prijenosnog računala i određivanje opcija na razini BIOS-a.
○ Promjena postavki načina podizanja Navigacijske tipke NAPOMENA: Za većinu opcija programa za postavljanje sustava promjene koje izvršite su zabilježene no nemaju učinak dok ponovno ne pokrenete sustav. Tipke ¸Navigacija Strelica gore Vraća se na prethodno polje. Strelica dolje Pomiče se na sljedeće polje. Enter Odaberie vrijednosti u odabranom polju (ako postoji) ili slijedite poveznicu u polju. Razmaknica proširuje ili smanjuje padajući ‐popis, ako postoji.
Mogućnost Opis ● Windows Boot Manager (zadana postavka) Popis opcija podizanja ● Legacy (Naslijeđe) ● UEFI – odabrano po zadanoj postavci Advanced Boot Options Ova opcija omogućuje vam učitavanje naslijeđenih dodatnih ROM-ova. Opcija Omogući naslijeđene dodatne ROM-ove onemogućena je. Opcija Enable Attempt Legacy Boot (Omogući pokušaj naslijeđenog podizanja) onemogućena je po zadanoj postavci.
Mogućnost Opis Thunderbolt Adaptor Configuration ● Enable Thunderbolt Technology Support (Omogući podršku za tehnologiju Thunderbolt). Ova opcija automatski je omogućena.
Mogućnost Opis ● ● ● ● Enable Camera (Omogući kameru) – omogućeno po zadanoj postavci Secure Digital (SD) card (SD kartica) – omogućeno po zadanoj postavci Secure Digital (SD) card boot (Podizanje sustava sa SD kartice) Secure Digital (SD) card read-only-mode (Način rada samo za čitanje SD kartice) Opcije video zaslona Mogućnost Opis LCD Brightness Omogućuje vam prilagodbu svjetline zaslona ovisno o izvoru napajanja (Na bateriji i Na struji).
Mogućnost Opis UEFI Capsule Ova opcija određuje da li sustav dopušta ažuriranja BIOS-a putem paketa UEFI kapsule. Firmware Updates ● Enable UEFI Capsule Firmware Updates (Omogući ažuriranja firmvera UEFI kapsule). Ova opcija je omogućena po zadanoj postavci. TPM 2.0 Security Omogućuje vam da omogućite pouzdani modul platforme (eng. Trusted Platform Module (TPM) tijekom POST-a.
Mogućnost Opis Zadana postavka: Onemogućeno Expert Key Management Omogućuje vam rukovanje bazama podataka sigurnosnih ključeva samo ako je sustav u prilagođenom načinu. Opcija Enable Custom Mode (Omogući prilagođeni način) onemogućena je po zadanoj postavci. Opcije su: ● ● ● ● PK – omogućeno po zadanoj postavci KEK db dbx Ako omogućite Custom Mode (Prilagođeni način rada), pojavljuju se odgovarajuće opcije za PK, KEK, db i dbx.
Mogućnost Opis C-States Control Omogućuje vam da omogućite ili onemogućite dodatna stanja mirovanja procesora. ● C status Zadana postavka: opcija je omogućena. Intel TurboBoost Omogućuje vam da omogućite ili onemogućite Intel TurboBoost način rada procesora. ● Omogućuje Intel TurboBoost Zadana postavka: opcija je omogućena. HyperThread Omogućuje vam da omogućite ili onemogućite HyperThreading u procesoru. ● Disabled (Onemogućeno) ● Enabled (Omogućeno) Zadana postavka: odabrano je Enabled (Omogućeno).
Mogućnost Opis ● LAN or WLAN (LAN ili WLAN) ● Disabled (Onemogućeno) ● WLAN Zadana postavka: Onemogućeno Block Sleep Ova opcija omogućuje vam ulaz u spavanje (stanje S3) u okruženju operacijskog sustava. Blokiranje stanja spavanja (S3 stanje) Zadana postavka: Opcija je onemogućena Peak Shift Ova opcija omogućuje vam da minimizirate potrošnju izmjenične struje u dijelovima dana kad je potrošnja najveća.
Mogućnost Opis NAPOMENA: Kad je u tijeku postavljanje, ova opcija nema utjecaja. Postavljanje radi u načinu rada Samo tipka Fn. Numlock Enable Omogućuje vam da omogućite NumLock kod podizanja sustava računala. Enable Network (Omogući mrežu). Ova opcija je omogućena po zadanoj postavci. Fn Key Emulation Omogućuje vam da postavite opciju prema kojoj tipka Scroll Lock upotrebljava se za simulaciju funkcije tipke Fn.
Mogućnost Opis VT for Direct I/O Omogućuje ili onemogućuje alatu Virtual Machine Monitor (VMM) upotrebu dodatnih hardverskih mogućnosti koje omogućuje tehnologija Intel® Virtulization za izravne U/I. Omogući VT za Direct I/O - omogućeno po zadanoj postavci. Trusted Execution Ova opcija određuje može li Measured Virtual Machine Monitor (MVMM) iskoristiti dodatne hardverske mogućnosti koje omogućuje Intel Trusted Execution Technology.
Mogućnost Opis ● Always perform integrity check (Uvijek izvrši provjeru integriteta) – onemogućeno po zadanoj postavci Opcije zaslona s dnevnicima sustava Mogućnost Opis BIOS Events Omogućuje vam da pregledate i izbrišete događaje POST testa programa za podizanje sustava (BIOS). Thermal Events Omogućuje vam da pregledate i obrišete događaje programa za podizanje sustava (termalni). Power Events Omogućuje vam da pregledate i obrišete događaje programa za podizanje sustava (napajanje).
Brisanje ili promjena postojeće zaporke postavljanja sustava Provjerite je li Password Status (Status zaporke) Unlocked (Otključan) (u postavkama sustava) prije nego što pokušate izbrisati ili promijeniti postojeću zaporku sustava i postavljanja. Ne možete izbrisati ili promijeniti postojeću zaporku sustava ili postavljanja ako je Password Status (status zaporke) Locked (Zaključana). Za ulaz u program za postavljanje sustava pritisnite F2 odmah nakon uključivanja ili ponovnog podizanja sustava. 1.
tražiti prilikom svakog ponovnog pokretanja sustava. Ako ne znate ključ za oporavak, to može dovesti do gubitka podataka ili nepotrebne ponovne instalacije operativnog sustava.
Većina Dell sustava izrađenih nakon 2012. godine ima tu mogućnost i to možete provjeriti pokretanjem sustava s jednokratnog izbornika F12 za pokretanje sustava gdje ćete vidjeti da li se BIOS FLASH UPDATE (FLASH AŽURIRANJE BIOS-A) nalazi kao mogućnost u izborniku za pokretanja sustava. Ako ta mogućnost postoji, tada BIOS podržava mogućnost ažuriranja BIOS-a.
4. Odaberite vanjski USB uređaj 5. Nakon odabira datoteke dvaput kliknite ciljnu datoteku za ažuriranje, a zatim pritisnite za slanje.
6. Kliknite Update BIOS (Ažuriraj BIOS), a sustav će se ponovo pokrenuti radi ažuriranja BIOS-a. 7. Nakon dovršenja, sustav će se ponovno pokrenuti i postupak ažuriranja BIOS-a bit će gotov.
6 Softver U ovom su poglavlju navedeni podržani operativni sustavi i upute za instalaciju upravljačkih programa.
Softver 83
Upravljački program za video Provjerite je li upravljački program za video već instaliran na sustavu. Upravljački program za zvuk Provjerite je li upravljački program za zvuk već instaliran na sustavu.
Upravljački program mrežne kartice Sustav dolazi s upravljačkim programima za LAN i za Wi-Fi i u mogućnosti je otkriti LAN i Wi-Fi bez instalacije upravljačkih programa. Upravljački program USB-a Provjerite jesu li upravljački programi za USB već instalirani na sustavu. Upravljački program uređaja za pohranu Provjerite jesu li upravljački programi za kontroler pohrane instalirani na sustavu.
Uređaj sučelja za interakciju s čovjekom (eng. Human Interface Device, HID) Provjerite je li upravljački program uređaja sučelja za interakciju s čovjekom instaliran na računalu. ControlVault uređaj Provjerite je li upravljački program ControlVault uređaja instaliran na sustavu. Uređaj za otkrivanje blizine Provjerite je li upravljački program uređaja za otkrivanje blizine instaliran na sustavu. Čitač smart kartica Provjerite jesu li upravljački programi čitača pametnih kartica instalirani na sustavu.
Softver 87
7 Rješavanje problema Teme: • • Dell poboljšano dijagnostičko testiranje računala prije podizanja sustava – ePSA Diagnostic 3.0 Ponovno postavljanje sata stvarnog vremena Dell poboljšano dijagnostičko testiranje računala prije podizanja sustava – ePSA Diagnostic 3.0 ePSA dijagnostiku možete pokrenuti na jedan od sljedećih načina: ● Pritisnite tipku F12 kod pokretanja sustava i odaberite opciju ePSA or Diagnostics (ePSA ili dijagnostika) u izborniku jednokratnog podizanja sustava.
8 Kontaktiranje tvrtke Dell NAPOMENA: Ako nemate aktivnu internet vezu, možete pronači kontaktne informacije na vašem računu koji ste dobili prilikom kupnje računala, pakiranju ili katalogu proizvoda tvrtke Dell. Tvrtka Dell pruža nekoliko opcija za podršku i uslugu kojima možete pristupiti putem interneta ili telefona. Njihova dostupnost ovisi o državi i proizvodu, stoga neke usluge možda neće biti dostupne u vašoj regiji.