Service manual

Fan: Dell Latitude C840 Service Manual
2. Remove the system board.
3. Remove the three M2 x 4-mm screws from the fan.
4. Disconnect the two fan cables from the system board.
5. Pull the fan away from the back-panel bracket.
NOTICE: When reconnecting the fan cables, connect the shorter cable to the
connector closest to the fan. Route both cables so that they will not be pinched
by the microprocessor thermal-cooling assembly.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/c840/fan.htm (2 of 2) [2/28/2004 8:03:48 AM]