Specifications

4-22 Dell Latitude CP and CPi Service Manual
NOTE: Support the display assembly with a book or similar object so that
the display assembly does not open beyond 180 degrees.
The palmrest assembly is secured in the bottom case assembly by four
snaps and tabs on the right and left ends of the palmrest. Take care not to
damage the snaps when removing the palmrest.
NOTE: When replacing the palmrest, ensure that the vertical tab at the back of
the palmrest fits on the
outside
of the system board assembly, near the paral-
lel port connector. Also, check that the microphone boot is properly located in
its slot on the top EMI shield and is fitted within the palmrest assembly.