Specifications

Removing and Replacing Parts 4-35
/&',QYHUWHU%RDUG
The following subsections describe how to remove an LCD inverter board from
a 12.1-inch or 13.3-inch LCD display.
,QFK/&''LVSOD\
Note the placement of the EMI shield over the lower screw boss, and the
routing of the LCD-panel power cable around the upper screw boss.
NOTE: When installing the inverter board, connect the LCD interface cable to
the board prior to securing the board in the display-assembly top cover. After
installing the inverter board, ensure that the LCD-panel power cable is routed
around the plastic screw bosses in the display-assembly top cover.
LCD inverter board
display-assembly top cover
connector J1
connector J2
5-mm
screws (2)
spacer (2)
LCD-assembly
power cable