Service Manual

Back to Contents Page

Docking Doors
Removing the Docking Doors
Installing the Docking Doors

Removing the Docking Doors


1. Follow the instructions in "Preparing to Work Inside the Computer" to remove the battery and prepare the computer for work.
2. Gently bend the docking doors and lift them away from the computer base.




Installing the Docking Doors

Slide the side of the docking doors with the spring over the longer posts.

CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
docking doors
8X516