Service Manual

Back to Contents Page

Reserve Battery


1. Follow the instructions in "Preparing to Work Inside the Computer" to remove the main battery and prepare the computer for work.
2. Remove any installed memory modules, smart card, modem, or PC Card.
3. Remove the keyboard.
4. Remove the display.
5. Remove the palm rest.

6. Lift out the reserve battery, and disconnect it from the system board connector.




Back to Contents Page

CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: Note the reserve battery location before you remove it so that you can put the replacement reserve battery in the same location.
1
reserve battery
3U490
2
system board connector
