Dell™ Latitude™ D531 User’s Guide Model PP04X w w w. d e l l . c o m | s u p p o r t . d e l l .
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. Abbreviations and Acronyms For a complete list of abbreviations and acronyms, see "Glossary" on page 151.
Contents 1 Finding Information 2 About Your Computer Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Left Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Right Side View Back View 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Transferring Information to a New Computer Files and Settings Transfer Wizard 4 18 . . . . . . . . .
Storing a Battery . 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Keyboard and Touch Pad Numeric Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Key Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . System Functions . . . . . . . . . . . . . . . Battery . . . . . . . . . . . . . . . . . . . . Wireless . . . . . . . . . . . . . . . . . . . . Display Functions . . . . . . . . . . . . . . . Power Management . . . . . . . .
Using Blank CDs and DVDs . Helpful Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 52 Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Adjusting the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 . . . . . . . . . . . . . . . . . . . . . . . . If the Computer Is Turned Off or in Hibernate Mode . . . . . . . . . . . . 54 . . . . . . . . . . . . . . 54 . . . . . . . . . . . . . . . .
10 Securing Your Computer Security Cable Lock Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Using a Primary/System Password . Using an Administrator Password . Using a Hard Drive Password . . . . . . . . . . . . . . . . . . . . . . . 72 72 73 . . . . . . . . . . . . . . . . . . . . . . . . . 74 . . . . . . . . . . . . . . . . . . . . . . . . . 74 . . . . . . . . . . . . . . . . . . . . . . . .
Drive Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CD and DVD drive problems Hard drive problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-Mail, Modem, and Internet Problems . Error Messages 83 84 84 . . . . . . . . . . . . . . . . . . . . 85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 IEEE 1394 Device Problems Keyboard Problems . . . . . . . . . . . . . . . . . . . . . . . . .
13 System Setup Program Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Viewing the System Setup Screens System Setup Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Commonly Used Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the Boot Sequence. Performing a One-Time Boot . Changing COM Ports . . . . . 99 99 100 100 . . . . . . . . . . . . . . . . . . . . . . 100 101 101 .
Mini-Card . Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 Internal Card With Bluetooth® Wireless Technology. Coin-Cell Battery . . . . . . . . . . . . . 125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 About the Media Bay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . About the Device Security Screw . . . . . .
19 Specifications 20 Appendix FCC Notice (U.S. Only) FCC Class B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Macrovision Product Notice . Glossary 10 Contents . . . . . . . . . . . . . . . . . . . . . . . . . 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Finding Information NOTE: Additional information may ship with your computer.Some features or media may be optional and may not ship with your computer. Some features or media may not be available in certain countries.
What Are You Looking For? Find It Here • • • • • • • • • • • • • How to set up my computer How to care for my computer Basic troubleshooting information How to run the Dell Diagnostics Error codes and diagnostic lights Tools and utilities How to set up a printer Additional information about setting up my computer How to troubleshoot and solve problems How to remove and install parts How to open my computer cover Specifications How to contact Dell Quick Reference Guide • • • • • • Warranty information
What Are You Looking For? Find It Here • Service Tag and Express Service Code • Microsoft Windows License Label Service Tag and Microsoft® Windows® License These labels are located on your computer. • Use the Service Tag to identify your computer when you use support.dell.com or contact support. •Enter the Express Service Code to direct your call when contacting support.
What Are You Looking For? Find It Here • Software upgrades and troubleshooting hints • Frequently asked questions, hot topics, and general health of your computing environment Dell Support Utility • How to use Windows operating systems • How to work with programs and files • How to personalize my desktop Windows Help and Support Center 1 Click the Start button or → Help and Support. 2 Type a word or phrase that describes your problem and click the arrow icon.
2 About Your Computer Front View 1 2 3 11 10 4 9 5 6 7 8 1 display latch 2 display 3 power button 4 device status lights 5 speakers (2) 6 keyboard 7 touch pad 8 touch pad buttons 9 keyboard status lights 10 wireless enable/disable button 11 ambient light sensor About Your Computer 15
DISPLAY LATCH DISPLAY — Keeps the display closed. — For more information about your display, see "Using the Display" on page 41. P O W E R B U T T O N — Press the power button to turn on the computer or exit a power management mode (see "Power Management Modes" on page 32). NOTICE: To avoid losing data, turn off your computer by performing a Microsoft® Windows® operating system shutdown rather than by pressing the power button.
Turns on when you turn on the computer and blinks when the computer is in standby mode. Turns on steadily or blinks to indicate battery charge status. Turns on when Bluetooth® wireless technology is enabled. To enable or disable Bluetooth wireless technology or other wireless devices, press the wireless enable/disable button. NOTE: Bluetooth wireless technology is an optional feature on your computer, so the icon turns on only if Bluetooth wireless technology is installed on your computer.
KEYBOARD STATUS LIGHTS The green lights located above the keyboard indicate the following: 9 Turns on when the numeric keypad is enabled. A Turns on when the uppercase letter function is enabled. Turns on when the scroll lock function is enabled.
1 security cable slot 2 air vent 3 IEEE 1394 connector 4 audio connectors (2) 5 PC Card slot 6 hard drive — Lets you attach a commercially available antitheft device to the computer. For more information, see the instructions included with the device. SECURITY CABLE SLOT NOTICE: Before you buy an antitheft device, ensure that it will work with the security cable slot. — The computer uses an internal fan to create airflow through the vents, which prevents the computer from overheating.
Attach headphones or speakers to the Attach a microphone to the connector. connector. PC C A R D S L O T — Supports one PC Card, such as a modem or network adapter, or an ExpressCard in an adapter. The computer ships with a plastic blank installed in the slot. For more information, see "Using Cards" on page 67. HARD DRIVE — Stores software and data.
1 2 3 1 network connector (RJ-45) 2 S-video TV-out connector 3 USB connectors (2) 4 modem connector (RJ-11) 5 serial connector 6 VGA connector 7 AC adapter connector 8 air vents NETWORK CONNECTOR 4 5 6 7 8 (RJ-45 ) NOTICE: The network connector is slightly larger than the modem connector. To avoid damaging the computer, do not plug a telephone line into the network connector. Connects the computer to a network.
MODEM CONNECTOR ( R J - 1 1) If you ordered the optional internal modem, connect the telephone line to the modem connector. For information on using the modem, see the online modem documentation supplied with your computer. See "Finding Information" on page 11 for information about accessing online user’s guides. SERIAL CONNECTOR Connects serial devices, such as a mouse or handheld device. VGA C O N N E C T O R Connects an external VGA monitor. For more information, see "Using the Display" on page 41.
from overheating. CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your computer in a low-airflow environment, such as a closed briefcase, while it is running. Restricting the airflow can damage the computer or cause a fire. NOTE: The computer turns on the fan when the computer gets hot. Fan noise is normal and does not indicate a problem with the fan or the computer.
MEMORY MODULE/COIN-CELL BATTERY COVER — Covers the compartment that contains one memory module and the coin-cell battery. For additional information, see "Adding and Replacing Parts" on page 111. — Lets you attach your computer to a docking device. See the documentation that came with your docking device for additional information. DOCKING DEVICE SLOT NOTICE: Your computer features Undock & Go™ technology that allows you to undock your computer without going into standby mode.
3 Transferring Information to a New Computer The Microsoft® Windows® XP operating system provides the Files and Settings Transfer Wizard to move data from a source computer to a new computer. You can transfer data, such as: • E-mail messages • Toolbar settings • Window sizes • Internet bookmarks You can transfer the data to the new computer over a network or serial connection, or you can store it on removable media, such as a writable CD, for transfer to the new computer.
4 On the Do you have a Windows XP CD? screen, click I will use the wizard from the Windows XP CD→ Next. 5 When the Now go to your old computer screen appears, go to your old or source computer. Do not click Next at this time. To copy data from the old computer: 1 On the old computer, insert the Windows XP Operating System media. 2 On the Welcome to Microsoft Windows XP screen, click Perform additional tasks. 3 Under What do you want to do?, click Transfer files and settings.
6 When the disk creation completes and the Now go to your old computer message appears, do not click Next. 7 Go to the old computer. To copy data from the old computer: 1 On the old computer, insert the wizard disk. 2 Click the Start→ Run. 3 In the Open field on the Run window, browse to the path for fastwiz (on the appropriate removable media) and click OK. 4 On the Files and Settings Transfer Wizard welcome screen, click Next. 5 On the Which computer is this? screen, click Old Computer→ Next.
Transferring Information to a New Computer
4 Using a Battery Battery Performance NOTE: For information about the Dell warranty for your computer, see the Product Information Guide or separate paper warranty document that shipped with your computer. For optimal computer performance and to help preserve BIOS settings, operate your Dell™ portable computer with the main battery installed at all times. One battery is supplied as standard equipment in the battery bay.
CAUTION: Do not dispose of batteries with household waste. When your battery no longer holds a charge, call your local waste disposal or environmental agency for advice on disposing of lithium-ion or lithium-polymer batteries. See "Battery Disposal" in the Product Information Guide. CAUTION: Misuse of the battery may increase the risk of fire or chemical burn. Do not puncture, incinerate, disassemble, or expose the battery to temperatures above 65°C (149°F). Keep the battery away from children.
Check the Battery Health NOTE: You can check battery health in one of two ways: by using the charge gauge on the battery as described below and by using the Battery Meter in Dell QuickSet. For information about QuickSet, right-click the icon in the taskbar, and click Help. To check the battery health using the charge gauge, press and hold the status button on the battery charge gauge for at least 3 seconds.
Power Management Modes Standby Mode Standby mode conserves power by turning off the display and the hard drive after a predetermined period of inactivity (a time-out). When the computer exits standby mode, it returns to the same operating state it was in before entering standby mode. NOTICE: If your computer loses AC and battery power while in standby mode, it may lose data. To enter standby mode: • Click the Start button and then click Turn off computer→ Stand by.
NOTE: Some PC Cards or ExpressCards may not operate correctly after the computer exits hibernate mode. Remove and reinsert the card (see "" on page 69), or simply restart (reboot) your computer. To exit hibernate mode, press the power button. The computer may take a short time to exit hibernate mode. You cannot make the computer exit hibernate mode by pressing a key or touching the touch pad. For more information on hibernate mode, see the documentation that came with your operating system.
NOTICE: You must remove all external cables from the computer to avoid possible connector damage. For information about replacing the second battery, which is located in the media bay, see "Removing and Installing Media Bay Devices" on page 128. To remove the battery: 1 If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions. 2 Ensure that the computer is turned off, in hibernate mode, or connected to AC power.
5 Using the Keyboard and Touch Pad Numeric Keypad numeric keypad The numeric keypad functions like the numeric keypad on an external keyboard. Each key on the keypad has multiple functions. The keypad numbers and symbols are marked in blue on the right of the keypad keys. To type a number or symbol, hold down and press the desired key. • To enable the keypad, press . The • To disable the keypad, press again. 9 light indicates that the keypad is active.
Battery Displays the Dell™ QuickSet Battery Meter (see "Checking the Battery Charge" on page 30). Wireless Enables and disables wireless networking and Bluetooth wireless technology. Displays the status for each radio device installed in the computer. Display Functions Switches the video image to the next display option. The options include the integrated display, an external monitor, and both displays simultaneously.
Speaker Functions Increases the volume of the integrated speakers and external speakers, if attached. Decreases the volume of the integrated speakers and external speakers, if attached. Enables and disables the integrated speakers and external speakers, if attached. Microsoft® Windows® Logo Key Functions Windows logo key and Minimizes all open windows. Windows logo key and Restores all minimized windows.
1 2 1 touch pad 2 touch pad buttons • To move the cursor, lightly slide your finger over the touch pad. • To select an object, lightly tap once on the surface of the touch pad or use your thumb to press the left touch-pad button. • To select and move (or drag) an object, position the cursor on the object and tap twice on the touch pad. On the second tap, leave your finger on the touch pad and move the selected object by sliding your finger over the surface.
3 Click OK to save the settings and close the window.
Using the Keyboard and Touch Pad
6 Using the Display Display Properties Adjusting Brightness When a Dell™ computer is running on battery power, you can conserve power by setting the display brightness to the lowest comfortable setting by pressing and the up- or down-arrow key on the keyboard. NOTE: Brightness key combinations only affect the display on your portable computer, not monitors or projectors that you attach to your portable computer or docking device.
NOTE: Use only the Dell-installed video drivers, which are designed to offer the best performance with your Dellinstalled operating system. If you choose a resolution or color palette that is higher than the display supports, the settings adjust automatically to the closest supported values. To set the display resolution and refresh rate for your display, perform the steps in the following section that corresponds to the operating system your computer is using.
• Advance View allows the advanced user to access and configure the complete feature set of the software. The Catalyst Control Center can be customized for easy access to the features you use most. Use the Catalyst Control Center to access a comprehensive online help system. In addition, you can connect to ATI website at www.ati.com for more information about how to use the Catalyst Control Center.
Using an External Monitor Extending Your Computer Display You can attach an external monitor or projector to your computer and use it as an extension of your display (known as "dual independent display" or "extended desktop" mode). This mode allows you to use both screens independently and drag objects from one screen to the other, effectively doubling the amount of viewable work space.
3 In the Display Settings window, click the monitor 2 icon, click the Extend the desktop onto this monitor check box, and then click Apply. 4 Click OK to close the Display Settings window. To disable extended desktop mode: 1 In the Display Settings window, click the Settings tab. 2 Click the monitor 2 icon, uncheck the Extend the desktop onto this monitor option, and then click Apply.
1 1 ambient light sensor The ambient light sensor is located on the front of the computer display. The sensor detects available environmental light and automatically increases or decreases the display brightness to compensate for low-light and high-light environments. Because increased brightness uses more battery power, the sensor monitors the light intensity in the environment and decreases brightness in low-light environments to avoid depleting battery power unnecessarily.
NOTE: Rebooting the computer returns the ambient light sensor to the setting (either enabled or disabled) as it was before it was adjusted. NOTE: The ambient light sensor adjusts the display backlighting on your portable computer only. It does not control the brightness on any external monitors or projectors.
Update with your book title
7 Using Multimedia Playing CDs or DVDs NOTICE: Do not press down on the CD/DVD tray when you open or close it. Keep the tray closed when you are not using the drive. NOTICE: Do not move the computer while playing CDs or DVDs. 1 Press the eject button on the front of the drive. 2 Pull out the tray. 3 Place the disc, label side up, in the center of the tray and snap the disc onto the spindle.
4 Push the tray back into the drive. To format CDs for storing data, to create music CDs, or to copy CDs, see the CD software that came with your computer. NOTE: Ensure that you follow all copyright laws when you create CDs. A CD player includes the following basic buttons: Play. Move backward within the current track. Pause. Move forward within the current track. Stop. Go to the previous track. Eject. Go to the next track. A DVD player includes the following basic buttons: Stop.
This section applies only to computers that have a CD-RW, DVD+/-RW, or CD-RW/DVD (combo) drive. NOTE: The types of CD or DVD drives offered by Dell may vary by country. The following instructions explain how to make an exact copy of a CD or DVD using Roxio Creator Plus - Dell Edition. You can also use Roxio Creator Plus for other purposes, such as creating music CDs from audio files stored on your computer or backing up important data.
CD-Writable Drives Media Type Read Write Rewritable CD-R Yes Yes No CD-RW Yes Yes Yes Read Write Rewritable DVD-Writable Drives Media Type CD-R Yes Yes No CD-RW Yes Yes Yes DVD+R Yes Yes No DVD-R Yes Yes No DVD+RW Yes Yes Yes DVD-RW Yes Yes Yes DVD+R DL Yes Yes No DVD-R DL Maybe No No DVD-RAM Maybe No No Helpful Tips 52 • Use Microsoft® Windows® Explorer to drag and drop files to a CD-R or CD-RW only after you start Roxio Creator Plus and open a Creator
Adjusting the Volume NOTE: When the speakers are muted, you do not hear the CD or DVD playing. 1 Open the Volume Control window. 2 Click and drag the bar in the Volume Control column and slide it up or down to increase or decrease the volume. For more information on volume control options, click Help in the Volume Control window. The Volume Meter displays the current volume level, including mute, on your computer.
3 Under Screen resolution, click and drag the bar to reduce the resolution setting. 4 In the drop-down menu under Color quality, click Medium (16 bit) and click OK. Microsoft Windows Vista® 1 Click the Windows Vista Start button → Control Panel→ Appearance and Personalization. 2 Under Personalization, click Adjust Screen Resolution. The Display Properties window appears. 3 Under Resolution: click and drag the bar reduce the resolution setting. 4 In the drop-down menu under Colors:, click Medium (16 bit).
S-Video and Standard Audio 1 2 1 audio connector 2 S-video TV-out connector 1 2 1 standard S-video cable 2 standard audio cable 1 Turn off the computer and the TV and/or audio device that you want to connect. NOTE: If your TV or audio device supports S-video but not S/PDIF digital audio, you can connect an S-video cable directly to the S-video TV-out connector on the computer (without the TV/digital audio cable).
Setting Up the Cyberlink (CL) Headphones NOTE: The CL headphone feature is available only if your computer has a DVD drive. If your computer has a DVD drive, you can enable digital audio for DVD playback. 1 Launch the Cyberlink PowerDVD program. 2 Insert a DVD into the DVD drive. If the DVD begins playing, click the stop button. 3 Click the Settings option. 4 Click the DVD option. 5 Click the DVD Audio Setting icon.
4 Click the tab for your video card. NOTE: To determine the type of video card installed in your computer, see the Windows Help and Support Center. To access the Help and Support Center in Windows Vista, click the Windows Vista Start button → Help and Support. Under Pick a Task, click Use Tools to view your computer information and diagnose problems. Then, under My Computer Information, select Hardware.
Using Multimedia
8 Setting Up and Using Networks Setting up a computer network provides connectivity between your computer and the Internet, another computer, or a network. For example, with a network set up in a home or small office you can print to a shared printer, access drives and files on another computer, browse other networks, or access the Internet. You can set up a local area network (LAN) using a network or broadband modem cable or set up a wireless LAN (WLAN).
Setting Up a Network Windows XP: 1 Click Start→ All Programs→ Accessories→ Communications→ Network Setup Wizard→ Next→ Checklist for creating a network. NOTE: Selecting the connection method labeled This computer connects directly to the Internet enables the integrated firewall provided with Windows XP Service Pack 2 (SP2). 2 Complete the checklist. 3 Return to the Network Setup Wizard and follow the instructions in the wizard.
Start Button and Connect To Option In Microsoft Windows XP, click Start→ Connect To→ Show all connections. In Microsoft Windows Vista, click → Connect To→ View network computers and devices. If Wireless Network Connection does not appear under LAN or High-Speed Internet, you may not have a wireless network card. If Wireless Network Connection appears, you have a wireless network card. To view detailed information about the wireless network card: 1 Right-click Wireless Network Connection.
9 Connect the other end of the network cable into the Internet network (RJ-45) connector on the unpowered wireless router. 10 Ensure that no network or USB cables, other than the network cable connecting the modem and the wireless router, are connected to the broadband modem. NOTE: Restart your wireless equipment in the order described below to prevent a potential connection failure. 11 Turn on only your broadband modem and wait for at least 2 minutes for the broadband modem to stabilize.
• The Windows XP or Windows Vista operating system To determine which wireless configuration utility is managing your wireless network card in Windows XP: 1 Click Start→ Settings→ Control Panel→ Network Connections. 2 Right-click the Wireless Network Connection icon, and then click View Available Wireless Networks. If the Choose a wireless network window states Windows cannot configure this connection, the wireless network card’s client utility is managing the wireless network card.
For more information about the Dell QuickSet wireless activity indicator, right-click the QuickSet icon in the taskbar and select Help. Mobile Broadband (WWAN) A Mobile Broadband network, also known as a Wireless Wide Area Network (WWAN), is a high-speed digital cellular network that provides Internet access over a much wider geographical area than a WLAN, which typically covers only from 100 to 1000 feet.
On the My Computer Information - Hardware screen, you can view the type of Mobile Broadband card installed in your computer as well as other hardware components. NOTE: The Mobile Broadband card is listed under Modems. Connecting to a Mobile Broadband Network NOTE: Before you connect to the Internet, you must activate Mobile Broadband service through your cellular service provider.
NOTE: Enabling Windows Firewall does not reduce the need for virus-checking software. For more information, click Start→ Control Panel→ Security→ Windows Firewall, or click Start or → Windows Help and Support Center.
9 Using Cards Card Types PC Cards See "Specifications" on page 141 for information on supported PC Cards. NOTE: A PC Card is not a bootable device. The PC Card slot has one connector that supports a single Type I or Type II card. The PC Card slot supports CardBus technology and extended PC Cards. "Type" of card refers to its thickness, not its functionality. PC Card Blanks Your computer shipped with a plastic blank installed in the PC Card slot. Blanks protect unused slots from dust and other particles.
www.dell.com | support.dell.com CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide and see "Before Working Inside Your Computer" on page 112. To install a PC Card: 1 Hold the card with its orientation symbol pointing into the slot and the top side of the card facing up. The latch may need to be in the "in" position before you insert the card. 2 Slide the card into the slot until the card is completely seated in its connector.
1 1 slot 2 2 ExpressCard Removing a PC Card or Blank CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide and see "Before Working Inside Your Computer" on page 112. NOTICE: Use the PC Card configuration utility (click the icon in the taskbar) to select a card and stop it from functioning before you remove it from the computer. If you do not stop the card in the configuration utility, you could lose data.
www.dell.com | support.dell.
10 Securing Your Computer NOTE: For information on how to secure your computer while traveling, see "Traveling With Your Computer" on page 133. Security Cable Lock NOTICE: Before you buy an antitheft device, ensure that it will work with the security cable slot on your computer. NOTE: Your computer does not ship with a security cable lock. \A security cable lock is a commercially available antitheft device. To use the lock, attach it to the security cable slot on your Dell™ computer.
Type of Password Features Primary/System • Protects the computer from unauthorized access Administrator • Gives system administrators or service technicians access to computers for repair or reconfiguration • Allows you to restrict access to the system setup program in the same way a primary password restricts access to the computer • Can be used instead of the primary password Hard drive • Helps protect the data on your hard drive or external hard drive (if one is being used) from unauthorized acces
The administrator password can be used instead of the primary password. Whenever you are prompted to enter the primary password, you can enter the administrator password. NOTICE: If you disable the administrator password, the primary password is also disabled. NOTE: The administrator password provides access to the computer, but it does not provide access to the hard drive when a hard drive password is assigned.
• Installing an administrative password on a system after the hard disk password has been created will not enable unlocking of the hard disk using the administrative password. Trusted Platform Module (TPM) NOTE: Computers shipping into China are not equipped with the TPM feature. NOTE: The TPM feature supports encryption only if the operating system supports TPM. For more information, see the TPM software documentation and the help files that came with the software.
NOTE: Computer tracking software may not be available in certain countries. NOTE: If you have computer tracking software and your computer is lost or stolen, you must contact the company that provides the tracking service to report the missing computer. If Your Computer Is Lost or Stolen • Call a law enforcement agency to report the lost or stolen computer. Include the Service Tag in your description of the computer.
Securing Your Computer
11 Cleaning Your Computer CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. Computer, Keyboard, and Display CAUTION: Before you clean your computer, disconnect the computer from the electrical outlet and remove any installed batteries. Clean your computer with a soft cloth dampened with water. Do not use liquid or aerosol cleaners, which may contain flammable substances.
3 Wipe the ball with a clean, lint-free cloth. 4 Blow carefully into the ball cage or use a can of compressed air to dislodge dust and lint. 5 If the rollers inside the ball cage are dirty, clean the rollers with a cotton swab moistened lightly with isopropyl alcohol. 6 Re-center the rollers in their channels if they are misaligned. Ensure that fluff from the swab is not left on the rollers. 7 Replace the ball and retainer ring, and turn the retainer ring clockwise until it clicks into place.
12 Troubleshooting Dell Technical Update Service The Dell Technical Update service provides proactive e-mail notification of software and hardware updates for your computer. The service is free and can be customized for content, format, and how frequently you receive notifications. To enroll for the Dell Technical Update service, go to support.dell.com/technicalupdate.
a When the DELL™ logo appears, press immediately. Select Diagnostics from the boot menu and press . NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop; then, shut down your computer and try again. NOTE: Before attempting option b, the computer must be powered down completely. b Press and hold the key while powering the computer on.
Option Function Test Memory Runs the stand-alone memory test Test System Runs System Diagnostics Exit Exits the Diagnostics 2 After you have selected the Test System option from the main menu, the following menu appears. NOTE: It is recommended that you select Extended Test from the menu below to run a more thorough check of devices in the computer. Option Function Express Test Performs a quick test of devices in the system. This typically can take 10 to 20 minutes.
Tab Function (continued) Help Describes the test and may indicate requirements for running the test. Configuration Displays your hardware configuration for the selected device. The Dell Diagnostics obtains configuration information for all devices from system setup, memory, and various internal tests, and it displays the information in the device list in the left pane of the screen.
Clicking the Dell Support Icon Click or right-click the icon to perform the following tasks: • Check your computing environment. • View the Dell Support Utility settings. • Access the help file for the Dell Support Utility. • View frequently asked questions. • Learn more about the Dell Support Utility. • Turn the Dell Support Utility off.
CD and DVD drive problems NOTE: High-speed CD or DVD drive vibration is normal and may cause noise, which does not indicate a defect in the drive or the CD or DVD. NOTE: Because of different regions worldwide and different disc formats, not all DVD titles work in all DVD drives. Problems writing to a CD/DVD-RW drive C L O S E O T H E R P R O G R A M S — The CD/DVD-RW drive must receive a steady stream of data when writing. If the stream is interrupted, an error occurs.
NOTE: The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the desired action. 4 Click Scan for and attempt recovery of bad sectors→ Start. E-Mail, Modem, and Internet Problems CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTE: Connect the modem to an analog telephone connector only.
receive pop-up advertisements, or you are having problems connecting to the Internet, your computer might be infected with spyware. Use an anti-virus program that includes anti-spyware protection (your program may require an upgrade) to scan the computer and remove spyware. For more information, go to support.dell.com and search for the keyword spyware. Error Messages Fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 139) as you complete these checks.
specific information—for example, Printer out of paper. Take the appropriate action. H A R D - D I S K D R I V E C O N F I G U R A T I O N E R R O R — The computer cannot identify the drive type. Shut down the computer, remove the hard drive (see "Hard Drive" on page 113), and boot the computer from a CD. Then shut down the computer, reinstall the hard drive, and restart the computer. Run the Hard-Disk Drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 79).
them. M E M O R Y O D D / E V E N L O G I C F A I L U R E A T A D D R E S S , R E A D V A L U E E X P E C T I N G V A L U E — A memory module may be faulty or improperly seated. Reinstall the memory modules (see "Memory" on page 116) and, if necessary, replace them. M E M O R Y W R I T E / R E A D F A I L U R E A T A D D R E S S , R E A D V A L U E E X P E C T I N G V A L U E — A memory module may be faulty or improperly seated.
T I M E - O F - D A Y N O T S E T - P L E A S E R U N T H E S YS T E M S E T U P P R O G R A M — The time or date stored in the system setup program does not match the system clock. Correct the settings for the Date and Time options (see "System Setup Program" on page 99). T I M E R C H I P C O U N T E R 2 F A I L E D — A chip on the system board may be malfunctioning. Run the System Set tests in the Dell Diagnostics (see "Dell Diagnostics" on page 79).
Fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 139) as you perform the various checks. NOTE: Use the integrated keyboard when running the Dell Diagnostics or the system setup program. When you attach an external keyboard, the integrated keyboard remains fully functional. External keyboard problems NOTE: When you attach an external keyboard, the integrated keyboard remains fully functional. C H E C K T H E K E Y B O A R D C A B L E — Shut down the computer.
The computer does not start up E N S U R E T H A T T H E AC A D A P T E R I S F I R M L Y C O N N E C T E D T O T H E C O M P U T E R A N D T O T H E E L E C T R I C A L O U T L E T . The computer stops responding NOTICE: You might lose data if you are unable to perform an operating system shutdown.
• Verify that the device drivers do not conflict with the program. • If necessary, uninstall and then reinstall the program.
C H E C K T H E N E T W O R K L I G H T S O N T H E N E T W O R K C O N N E C T O R — No light indicates that no network communication exists. Replace the network cable. P L U G T H E A /C P O W E R A D A P T E R I N T O T H E C O M P U T E R — If batter power only, the QuickSet utility can disable the onboard network card to save battery life. For more information on the QuickSet utility, see "Dell™ QuickSet" on page 131.
If the battery status light flashes green and orange, the battery is too hot to charge. Shut down the computer, disconnect the computer from the electrical outlet, and then let the battery and computer cool to room temperature. If the battery status light rapidly flashes orange, the battery may be defective. Contact Dell (see "Contacting Dell" on page 138). C H E C K T H E B A T T E R Y T E M P E R A T U R E — If the battery temperature is below 0° C (32° F), the computer will not start up.
Printer Problems Fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 139) as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTE: If you need technical assistance for your printer, contact the printer’s manufacturer. ENSURE THAT THE PRINTER IS TURNED ON CHECK THE PRINTER CABLE CONNECTIONS — • See the printer documentation for cable connection information.
Sound and Speaker Problems Fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 139) as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. No sound from integrated speakers A D J U S T T H E W I N D O W S V O L U M E C O N T R O L — Double-click the speaker icon in the lower-right corner of your screen. Ensure that the volume is turned up and that the sound is not muted.
C H E C K T H E M O U S E C A B L E — Shut down the computer. Disconnect the mouse cable, check it for damage, and firmly reconnect the cable. If you are using a mouse extension cable, disconnect it and connect the mouse directly to the computer. TO V E R I F Y T H A T T H E P R O B L E M I S W I T H T H E M O U S E , C H E C K T H E T O U C H P A D 1 Shut down the computer. 2 Disconnect the mouse. 3 Turn on the computer.
If the display is difficult to read A D J U S T T H E B R I G H T N E S S — Press and the up- or down-arrow key. M O V E T H E E X T E R N A L S U B W O O F E R A W A Y F R O M T H E C O M P U T E R O R M O N I T O R — If your external speaker system includes a subwoofer, ensure that the subwoofer is at least 60 cm (2 ft) away from the computer or external monitor. E L I M I N A T E P O S S I B L E I N T E R F E R E N C E — Turn off nearby fans, fluorescent lights, halogen lamps, or other appliances.
13 System Setup Program Overview NOTE: Your operating system may automatically configure most of the options available in the system setup program, thus overriding options that you set through the system setup program. (An exception is the External Hot Key option, which you can disable or enable only through the system setup program.) For more information on configuring features for your operating system, see the Help and Support Center. To access the Help and → Help and Support.
System Setup Screens NOTE: For information about a specific item on a system setup screen, highlight the item and see the Help area on the screen. On each screen, the system setup options are listed at the left. To the right of each option is the setting or value for that option. You can change settings that appear as white type on the screen. Options or values that you cannot change (because they are determined by the computer) appear less bright.
Performing a One-Time Boot You can set a one-time-only boot sequence without entering the system setup program. (You can also use this procedure to boot the Dell Diagnostics on the diagnostics utility partition on your hard drive.) 1 Shut down the computer through the Start menu. 2 If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions. 3 Connect the computer using an AC adapter. 4 Turn on the computer.
System Setup Program 102
14 Reinstalling Software Drivers What Is a Driver? A driver is a program that controls a device such as a printer, mouse, or keyboard. All devices require a driver program. A driver acts like a translator between the device and any other programs that use the device. Each device has its own set of specialized commands that only its driver recognizes. Dell ships your computer to you with required drivers already installed—no further installation or configuration is needed.
www.dell.com | support.dell.com NOTE: The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the desired action. Scroll down the list to see if any device has an exclamation point (a yellow circle with a [!]) on the device icon. If an exclamation point is next to the device name, you may need to reinstall the driver or install a new driver.
In most cases, the media starts running automatically. If it does not, start Windows Explorer, click your CD or DVD drive directory to display the media contents, and then double-click the autorcd.exe file. The first time that you run the media, it might prompt you to install setup files. Click OK, and follow the instructions on the screen to continue. 3 From the Language drop-down menu in the toolbar, select your preferred language for the driver or utility (if available). A welcome screen appears.
www.dell.com | support.dell.com 1 Click the Windows Vista start button → Help and Support. 2 Type hardware troubleshooter in the search field and press to start the search. 3 In the search results for "hardware troubleshooter," select the option that best describes the problem and follow the remaining troubleshooting steps.
2 In the search box type System Restore and press . NOTE: The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the desired action. 3 Click Next. Follow the remaining prompts on the screen. In the event that System Restore did not resolve the issue, you may undo the last system restore.
www.dell.com | support.dell.com To reinstall Windows, you need the following items: • Dell™ Operating System media • Dell Drivers and Utilities media NOTE: The Dell Drivers and Utilities media contains drivers that were installed during assembly of the computer. Use the Dell Drivers and Utilities media to load any required drivers.
4 Network Interface Card (NIC) Enables and enhances the network controller. 5 Sound Device Enables and enhances the audio controller. 6 Modem Enables and enhances the modem. 7 Wireless Network Card Enables and enhances the wireless network controller. 8 BlueTooth® Module Enables and enhances the Bluetooth controller. 9 PC Card/ExpressCard Controller Enables and enhances the PC Card or ExpressCard controller. 10 Touch Pad Enhances the pointing device features.
Reinstalling Software www.dell.com | support.dell.
15 Adding and Replacing Parts Before You Begin This section provides procedures for removing and installing the components in your computer. Unless otherwise noted, each procedure assumes that the following conditions exist: • You have performed the steps in "Turning Off Your Computer" on page 111 and "Before Working Inside Your Computer" on page 112. • You have read the safety information in the Dell™ Product Information Guide.
The computer turns off after the operating system shutdown process is complete. 2 Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your operating system, press and hold the power button for about 4 seconds to turn them off. Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your own personal safety.
2 3 1 1 battery tab 2 battery 3 battery-bay latch release 7 Remove the main battery: a Slide the battery-bay latch release on the bottom of the computer. b Remove the battery from the battery bay. 8 Press the power button to ground the system board. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. 9 Open the display by sliding the display latch to the side (see "Front View" on page 15).
CAUTION: Before working inside your computer, follow the safety instructions located in the Product Information Guide. NOTICE: To prevent data loss, turn off your computer before removing the hard drive (see "Turning Off Your Computer" on page 111). Do not remove the hard drive while the computer is on, in standby mode, or in hibernate mode. NOTICE: Hard drives are extremely fragile; even a slight bump can damage the drive.
7 See "Restoring Your Operating System" on page 106 to install the operating system for your computer. 8 Use the Drivers and Utilities media to install the drivers and utilities for your computer (see "Reinstalling Drivers and Utilities" on page 104). Returning a Hard Drive to Dell Return your old hard drive to Dell in its original or comparable foam packaging. Otherwise, the hard drive may be damaged in transit.
3 Insert a scribe into the indent to carefully pry up the hinge cover on the right side. 1 2 1 hinge cover 2 indent 4 Ease the hinge cover up, moving from right to left, and remove it. 5 To replace the hinge cover, insert the left edge of the cover into the hinge cover slot, and press from left to right until the cover snaps into place. Memory You can increase your computer memory by installing memory modules on the system board.
The computer has two memory slots, DIMM A and DIMM B. DIMM A is located on top of the computer under the keyboard, and DIMM B is located on the bottom of the computer under the memory module cover. DIMM A holds the basic memory module as configured from the factory. If you did not order additional memory, DIMM B is empty. Generally, if you add memory, you use DIMM B. If you are upgrading memory, you may need to install memory in DIMM A and DIMM B, depending on the extent of the upgrade.
1 2 1 memory module 2 securing clips (2) NOTICE: Insert memory modules at a 45-degree angle to avoid damaging the connector. If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure. 6 Ground yourself and install the new memory module: a Align the notch in the module edge connector with the tab in the connector slot. b Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place.
• In the Microsoft Windows Vista® operating system, click the Windows Vista Start button and Support→ Computer Information. → Help DIMM B Connector To install a memory module in the DIMM B connector: 1 Follow the procedures in "Before You Begin" on page 111. 2 Turn the computer upside-down, loosen the captive screw on the memory module cover (see "Bottom View" on page 23), and remove the cover.
1 2 1 memory module 2 securing clips (2) NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled “DIMMA” before you install a module in the connector labeled “DIMMB.” NOTICE: Insert memory modules at a 45-degree angle to avoid damaging the connector. If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure.
• In the Microsoft Windows XP operating system, right-click the My Computer icon on your desktop. Click Properties→ General. • In the Microsoft Windows Vista operating system, click the Windows Vista Start button and Support→ Computer Information. → Help Mini-Card If you ordered a Mini-Card with your computer, the card is already installed. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
1 1 b 122 antenna cables Release the card by pushing the metal securing bracket away from the card until the card pops up slightly.
1 1 c WLAN card 2 2 metal securing bracket Slide the card at a 45-degree angle out of its connector. NOTICE: The card connector is keyed to ensure correct insertion. If you feel resistance, realign the card. NOTE: Do not insert a Mobile Broadband (WWAN) network card into the WLAN card connector. NOTE: The Mini-Card may have two or three antenna connectors, depending on the type of card you ordered.
Keyboard CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). 1 Follow the procedures in "Before You Begin" on page 111. 2 Remove the hinge cover (see "Hinge Cover" on page 115). 3 Remove the three screws at the top of the keyboard.
1 keyboard 2 4 keyboard connector keyboard screws 3 cable connector NOTICE: To avoid scratching the palm rest when replacing the keyboard, hook the tabs along the front edge of the keyboard into the palm rest, and then secure the keyboard in place. 6 To replace the keyboard, connect the keyboard cable to the connector on the system board. 7 Place the tabs along the front edge of the keyboard into the palm rest, and lay the keyboard down on the palm rest.
1 2 metal tab card 3 cable connector 4 Pull the cable connector from the card connector. 2 1 3 1 card 2 card connector 3 cable connector NOTICE: Be careful when removing the card to avoid damaging the card, card cable, or surrounding components. Coin-Cell Battery CAUTION: Before performing the following procedures, follow the safety instructions in your Product Information Guide.
1 1 coin-cell battery 3 Insert a plastic scribe into the guide on the side of the coin-cell battery compartment, and ease the battery out of the compartment. When you replace the battery, insert it at a 30-degree angle under the clip with the positive (identified by a plus [+] symbol) side up, and then push it into place. About the Media Bay CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
Removing the Device Security Screw If the device security screw is installed, you must remove the screw to remove the device from the bay: 1 Save and close any open files, exit any open programs, and shut down the computer. 2 If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions. 3 Close the display and turn the computer over.
4 Pull the device out of the media bay. 5 Push the new device into the media bay until it clicks. 6 If you swapped the device with the computer running, the operating system automatically recognizes the device. If necessary, enter your password to unlock your computer.
Before You Begin
16 Dell™ QuickSet NOTE: This feature may not be available on your computer. Dell™ QuickSet provides you with easy access to configure or view the following types of settings: • Network connectivity • Power management • Display • System information Depending on what you want to do in Dell™ QuickSet, you can start it by either clicking, doubleclicking, or right-clicking the QuickSet icon in the Microsoft® Windows® taskbar. The taskbar is located in the lower-right corner of your screen.
Dell™ QuickSet
17 Traveling With Your Computer Identifying Your Computer • Attach a name tag or business card to the computer. • Write down your Service Tag and store it in a safe place away from the computer or carrying case. Use the Service Tag if you need to report a loss or theft to law enforcement officials and to Dell. • Create a file on the Microsoft® Windows® desktop called if_found. Place information such as your name, address, and phone number in this file.
Travel Tips NOTICE: Do not move the computer while using the optical drive to prevent loss of data. NOTICE: Do not check the computer as baggage. • Consider disabling wireless activity on your computer to maximize battery operating time. To disable wireless activity, press the wireless enable/disable button (see "Front View" on page 15). • Consider changing your power management options to maximize battery operating time (see "Power Management Modes" on page 32).
18 Getting Help Obtaining Assistance CAUTION: If you need to remove the computer cover, first disconnect the computer power and modem cables from all electrical outlets. If you experience a problem with your computer, you can complete the following steps to diagnose and troubleshoot the problem: 1 See "Troubleshooting" on page 79 for information and procedures that pertain to the problem your computer is experiencing. 2 See "Dell Diagnostics" on page 79 for procedures on how to run Dell Diagnostics.
DellConnect DellConnect is a simple online access tool that allows a Dell service and support associate to access your computer through a broadband connection, diagnose your problem and repair it all under your supervision. For more information, go to support.dell.com and click DellConnect. Online Services You can learn about Dell products and services on the following websites: www.dell.com www.dell.com/ap (Asian/Pacific countries only) www.dell.com/jp (Japan only) www.euro.dell.com (Europe only) www.
AutoTech Service Dell's automated support service—AutoTech—provides recorded answers to the questions most frequently asked by Dell customers about their portable and desktop computers. When you call AutoTech, use your touch-tone telephone to select the subjects that correspond to your questions. For the telephone number to call for your region, see "Contacting Dell" on page 138 Automated Order-Status Service To check on the status of any Dell products that you have ordered, you can go to support.dell.
Returns that are missing any of the preceding requirements will be refused at Dell’s receiving dock and returned to you. Before You Call NOTE: Have your Express Service Code ready when you call. The code helps Dell’s automated-support telephone system direct your call more efficiently. You may also be asked for your Service Tag (located on the back or bottom of your computer). Remember to fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 139).
CAUTION: Before working inside your computer, follow the safety instructions in your Product Information Guide.
Getting Help www.dell.com | support.dell.
19 Specifications Processor Processor type AMD Turion™ 64 Single Core processors or AMD Turion 64 X2 Dual Core processors or AMD Sempron™ processors Level 1 cache data cache: 64 KB instruction cache: 64 KB Level 2 cache AMD Turion processors: 512 KB or 1024 KB AMD Sempron processors: 128 KB or 256 KB External bus frequency 667 or 800 MHz System Information System chipset AMD™ M690T Chipset with ATI™ Radeon® X1270 Graphics Data bus width 64 bits DRAM bus width dual-channel (2) 64-bit buses Proc
PC Card (continued) Cards supported 3.3-V and 5-V PC Cards 1.
Ports and Connectors (continued) Docking D/Port advanced port replicator D/Dock compatible (PCI connector not supported) Communications Modem: Type v.92 56K MDC Controller softmodem Interface Azalia Network adapter 10/100/1000 Ethernet LAN on system board Wireless LAN • • • • • • Wireless PAN (Bluetooth wireless technology) • Bluetooth® wireless technology version 2.1 + Enhanced Data Rate • Backward compatible with Bluetooth wireless technology version 1.2 and 2.
Video TV support NTSC or PAL in S-video and composite modes (through Dell™ D/Port advanced port replicator only) Audio Audio type High Definition Audio (HDA) Audio controller SigmaTel STAC9205 Stereo conversion 24-bit (digital-to-analog) 24-bit (analog-to-digital) Interfaces: Internal HDA (Azalia/AC’97) External microphone mini-connector, stereo headphones/speakers mini-connector Microphone Integrated omni-direction analog microphone Speaker two 4-ohm speakers Internal speaker amplifier 2-W
Display (continued) Pixel pitch: WXGA 0.2588 mm(15.4-inch display) Power consumption (panel with backlight) (typical): WXGA Controls 5.0 W (maximum) Brightness can be controlled through keyboard shortcuts and through QuickSet. Keyboard Number of keys 87 (U.S. and Canada); 87 (China); 89 (Brazil); 88 (Europe); 91 (Japan) Key travel 2.7 mm ± 0.3 mm (0.11 inch ± 0.016 inch) Key spacing 19.05 mm ± 0.3 mm (0.75 inch ± 0.
Battery (continued) Charge time (approximate): Computer on 2.5 hours Computer off approximately 1 hour for 80 percent charge Operating time varies depending on operating conditions and can be significantly reduced under certain power-intensive conditions. See "Battery Performance" on page 29 for more information.
AC Adapter (continued) Temperature range: Operating 0° to 35°C (32° to 95°F) (65 W and 90 W) Storage –40° to 65°C (–40° to 149°F) (65 W and 90 W) Physical Height 35 mm (1.37 inches) Width 361 mm (14.2 inches) Depth 262.2 mm (10.3 inches) Weight approximately 6.0 lb (2.7 kg), with a 14.
Environmental (continued) Storage Airborne contaminant level 148 Specifications –15.2 to 10,668 m (–50 to 35,000 ft) G2 or lower as defined by ISA-S71.
20 Appendix FCC Notice (U.S. Only) FCC Class B This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules.
Model number: PP04X Company name: Dell Inc. Worldwide Regulatory Compliance & Environmental Affairs One Dell Way Round Rock, TX 78682 USA 512-338-4400 Macrovision Product Notice This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.
Glossary Terms in this Glossary are provided for informational purposes only and may or may not describe features included with your particular computer. A AC — alternating current — The form of electricity that powers your computer when you plug the AC adapter power cable in to an electrical outlet.
boot sequence — Specifies the order of the devices from which the computer attempts to boot. bootable media — Media that you can use to start your computer. In case your hard drive is damaged or your computer has a virus, ensure that you always have bootable media or floppy disk available. Your Drivers and Utilities media is on bootable CD or DVD. bootable disk — A disk that you can use to start your computer.
DDR2 SDRAM — double-data-rate 2 SDRAM — A type of DDR SDRAM that uses a 4-bit prefetch and other architectural changes to boost memory speed to over 400 MHz. device — Hardware such as a disk drive, printer, or keyboard that is installed in or connected to your computer. through an analog telephone line. dual-core — A technology in which two physical computational units exist inside a single processor package, thereby increasing computing efficiency and multi-tasking ability. device driver — See driver.
ESD — electrostatic discharge — A rapid discharge of static electricity. ESD can damage integrated circuits found in computer and communications equipment. where files are organized and grouped. Files in a folder can be viewed and ordered in various ways, such as alphabetically, by date, and by size. expansion card — A circuit board that installs in an expansion slot on the system board in some computers, expanding the capabilities of the computer. Examples include video, modem, and sound cards.
drive and then turns off the computer. When you restart the computer, the memory information that was saved to the hard drive is automatically restored. HTTP — hypertext transfer protocol — A protocol for exchanging files between computers connected to the Internet. assigned to a specific device so that the device can communicate with the processor. Each device connection must be assigned an IRQ. Although two devices can share the same IRQ assignment, you cannot operate both devices simultaneously.
M Mb — megabit — A measurement of memory chip capacity that equals 1024 Kb. Mbps — megabits per second — One million bits per second. This measurement is typically used for transmission speeds for networks and modems. MB — megabyte — A measurement of data storage that equals 1,048,576 bytes. 1 MB equals 1024 KB. When used to refer to hard drive storage, the term is often rounded to 1,000,000 bytes. MB/sec — megabytes per second — One million bytes per second.
P parallel connector — An I/O port often used to connect a parallel printer to your computer. Also referred to as an LPT port. partition — A physical storage area on a hard drive that is assigned to one or more logical storage areas known as logical drives. Each partition can contain multiple logical drives. PC Card — A removable I/O card adhering to the PCMCIA standard. Modems and network adapters are common types of PC Cards.
RFI — radio frequency interference — Interference that is generated at typical radio frequencies, in the range of 10 kHz to 100,000 MHz. Radio frequencies are at the lower end of the electromagnetic frequency spectrum and are more likely to have interference than the higher frequency radiations, such as infrared and light. devices such as a handheld digital device or digital camera to your computer.
more than 20 percent below the normal AC-line voltage level. Network connections cannot be protected by surge protectors. Always disconnect the network cable from the network connector during electrical storms. SVGA — super-video graphics array — A video standard for video cards and controllers. Typical SVGA resolutions are 800 x 600 and 1024 x 768.
V video controller — The circuitry on a video card or on the system board (in computers with an integrated video controller) that provides the video capabilities—in combination with the monitor—for your computer. video memory — Memory that consists of memory chips dedicated to video functions. Video memory is usually faster than system memory. The amount of video memory installed primarily influences the number of colors that a program can display.
Zip drive — A high-capacity floppy drive developed by Iomega Corporation that uses 3.5-inch removable disks called Zip disks. Zip disks are slightly larger than regular floppy disks, about twice as thick, and hold up to 100 MB of data.
Glossary
