User's Manual
Before You Begin 113
7
Remove the main battery:
a
Slide the battery-bay latch release on the bottom of the computer.
b
Remove the battery from the battery bay.
8
Press the power button to ground the system board.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before
opening the cover.
9
Open the display by sliding the display latch to the side (see "Front View" on page 15).
NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface,
such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to
dissipate static electricity, which could harm internal components.
10
Remove any installed card from the PC Card/ExpressCard slot (see "Left Side View" on page 18).
11
Remove the hard drive (see "Hard Drive" on page 113).
Hard Drive
CAUTION: If you remove the hard drive from the computer when the drive is hot,
do not touch
the metal housing
of the hard drive.
1 battery tab 2 battery 3 battery-bay latch release
2
3
1