User's Manual

126 Before You Begin
4 Pull the cable connector from the card connector.
NOTICE: Be careful when removing the card to avoid damaging the card, card cable, or surrounding components.
Coin-Cell Battery
CAUTION: Before performing the following procedures, follow the safety instructions in your Product
Information Guide .
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching a connector on the back panel of the computer.
NOTICE: To prevent damage to the system board, remove the main battery before you service the computer.
1 Follow the procedures in "Before You Begin" on page 111.
2 On the bottom of the computer, loosen the captive screw on the memory module/coin-cell battery
cover and remove the cover (see "Bottom View" on page 23).
1 metal tab 2 card 3 cable connector
1 card 2 card connector 3 cable connector
3
2
1