User guide

Dell Latitude E6420 XFR Setup and Features Information
Page 8
Operation of the PrimoSealâ„¢ Doors
Docking Device Connector Door
The docking device connector door is opened by sliding the door towards the front of the computer to its fully open position.
Reverse this procedure to close the door. Be sure the door is fully closed by sliding door until it reaches a mechanical stop.
Press-Latch Doors
There are three press-latch doors. Two on the back (power and RJ45) and one on the right side panel (HDMI and eSATA).
The press-latch door is opened by:
a. Unlock the door by pushing the slide-lock to the left (the latch is locked when slid to the right)
b. Open the door by pressing down on the latch and pulling the door away from the computer.
To close the door, rotate the door back towards the computer and press until it is in its fully closed position. Engage the slide-
lock by pushing to the right until the lock symbol is visible.
Lock