Manual

156 Adding and Replacing Parts
6 Disconnect the card from the cable and remove the card from the
computer.
Coin-Cell Battery
CAUTION: Before performing the following procedures, follow the safety
instructions in your Product Information Guide .
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching a connector on the back panel of the
computer.
NOTICE: To avoid damaging the system board, you must remove the main battery
before you begin working inside the computer.
1 Follow the procedures in "Before You Begin" on page 149.
2 Remove the hinge cover (see "Hinge Cover" on page 152).
3 Remove the keyboard (see "Keyboard" on page 153).