Owner's manual


4. Select Host Name. Press <Enter>. Then type in a unique name for this Intel AMT machine. Press <Enter>.
Spaces are not accepted in the host name. Make sure there is not a duplicate host name on the network. Host names can be used in place of the computer's
IP for any applications requiring the IP address.

5. Select TCP/IP. Press <Enter>.
The following messages appear:
l Disable Network Interface: (Y/N)
Press <n>.
If the network is disabled, then all remote AMT capabilities are disabled and TCP/IP settings are not necessary. This option is a toggle, and the next time
it is accessed you are prompted with the opposite setting.